Analysing demand for environmental quality: a willingness to pay/accept study in the province of Siena (Italy)

The province of Siena, Italy, enacted a new garbage plan (NGP) with the objective of increasing separate waste collection (SWC), shutting down six landfills and increasing incineration. The aim of the paper is to evaluate costs and benefits of the NGP. The hypothesis is that willingness to pay (WTP) should reflect the value to the community of having better environmental quality, according to the Contingent Valuation literature. The paper reports the results of a contingent valuation (CV). The sample was divided into two subsets: firms and households. Through the information gathered via a detailed questionnaire, parametric and non-parametric estimates were elaborated to analyse the WTP of the population for the benefits flowing from increased SWC, increased incineration and shutting down of landfills. These values were expressed as a share of the tax actually paid. Although a small subset of firms and households valued increasing incineration less positively, requesting compensation, on the whole interviewees (with large differences between firms and households) had a net positive WTP for the provisions included in NGP. Parametric estimation procedures enabled us to analyse the economic as well as social and demographic factors affecting these results. These elements are useful for computing a value for the waste charge that also reflects external effects. Finally, we estimated household income elasticity of WTP for the increase in SWC and found less than one: environmental quality is not a luxury good.     

Use of vitrified MSWI bottom ashes for concrete production

Bottom ashes from a north Italian municipal solid waste incinerator (MSWI) were vitrified at 1450 degrees C without adding any vitrifying agent, then ground and sieved to different granulometry (ranging from 50 microm to 20mm), and used as filler, sand, or aggregate for concrete. Samples were characterized via slump tests (UNI 9418), alkali-silica reactivity (UNI 8520/22 and ASTM C 298), and compression strength tests (UNI 6132, 6132/72, 6686/72), and compared to reference samples obtained without vitrified bottom ashes (VBA). Our results show that vitrified bottom ashes are unsuitable as a sand substitute; however, concrete containing up to 20 wt.% of VBA filler used as a substitute for cement and up to 75 vol.% of VBA as a substitute for natural aggregate retains the same mechanical properties as reference samples. Alkali-silica or other detrimental reactions were not observed in VBA-containing concrete samples after a period of two years. The results of this work demonstrate that vitrified bottom ashes from MSWI can be used instead of natural aggregates in mortar and concrete production.     

Can ISO 14063 be a tool to plan the environmental communication strategy of a territorial area?

Over the past two decades, communication on environmental values, actions and performance has become an essential activity of organisations, because of the increased public concern and legislation related to the environment.

Stakeholders put pressure on companies to take environmental responsibility. In this framework, an effective environmental communication can generate value-added on companies' environmental work, and consequently, their competitiveness and profitability can benefit from communicating their environmental responsibility.

In 2006, the International Organization for Standardization (ISO) launched a standard for environmental communication, ISO 14063. ISO 14063 should not be used for third-party certification purposes. Instead, it is intended to be used as a guideline and support companies to ensure successful environmental communication. The aim of this paper is to prompt a discussion about the applicability of the standard ISO 14063 not only to single organisations but as a tool to plan the environmental communication strategy of a whole territorial area. This is achieved by performing a case study relating to the Interreg IVC-funded project “Progresland”. The project involved three Italian and one Spanish natural areas and demonstrated that ISO 14063 could be a valid support to define and implement an environmental communication plan for a territorial area.     

Crops' responses to ozone in Mediterranean environments

The Mediterranean environment, and most of the Italian peninsula, presents some peculiarities in terms of crop response to O₃ since most physiological mechanisms activated upon O₃ exposure, such as stomatal closure, often overlap and interact with those that underlie plant adaptation to drought and hyperosmotic stress, which are typical of these environments. OTC and EDU experiments have demonstrated that O₃ causes strong yield losses when crops are grown without water limitations. However, exposure to water or saline stress significantly reduced O₃ effects on crop yield. In this review, we present the methodological approaches that have been used to study plant-ozone interactions in Italy as well as biochemical, physiological and agronomic responses for representative cropping systems of the Mediterranean climate.     

Responses to ozone pollution of alfalfa exposed to increasing salinity levels

Stomatal closure and biosynthesis of antioxidant molecules are two fundamental components of the physiological machinery that lead to stress adaptation during plant's exposure to salinity. Since high stomatal resistance may also contribute in counteracting O₃ damages, we hypothesized that soil salinization may increase O₃ tolerance of crops. An experiment was performed with alfalfa grown in filtered (AOT40 = 0 in both years) and non-filtered (AOT40 = 9.7 in 2005 and 6.9 ppm h in 2006) open-top chambers. Alfalfa yield was reduced by O₃ (−33%) only in plants irrigated with salt-free water, while the increasing levels of soil salinity until 1.06 dS m⁻¹ reduced both stomatal conductance and plant O₃ uptake, thus linearly reducing O₃ effects on yield. Therefore a reliable flux-based model for assessing the effects of O₃ on crop yield should take into account soil salinity.     

Coastal dune systems and disturbance factors: monitoring and analysis in central Italy

This study describes the conservation status of dune systems in relation to disturbance factors in the coastal stretch of the Viterbo province, Latium Region, Italy. Particular emphasis was given to the bioindication value of plant communities and their sequence. Each plant community was considered as a "habitat" in accordance with Annex I of the Directive 92/43/EU. Stress factors, such as sand dynamic and erosion, and anthropogenic pressures, such as trampling and bathing settlements, influence the sequence of habitats and weaken the system of relations that makes these coenoses to occur in extreme conditions. The choice to carry out surveys along wide transects, recording different data, allowed to explore the use of habitats as bioindicators. Comparing sites characterized by the same extension in a homogeneous area, it was possible to expand the use of canonical correspondence analysis (CCA) as a tool to correlate habitat composition and disturbance factors. The application of CCA showed a high correlation of degradation and habitat loss with coastal erosion, trampling and presence of waste. Furthermore, floristic surveys allowed the application of different biodiversity indices to quantify species richness of sampled areas. The conservation status of the sites investigated was found to be diverse, from the total disappearance of the mobile dune habitats to their complete sequence. The proposed methodology has been useful to fulfill the objective of the work and is applicable to other case studies in the Mediterranean.     

Enrichment of organic pollutants in the sea surface microlayer (SML) at Terra Nova Bay, Antarctica: influence of SML on superficial snow composition

Concentrations of dissolved and particle-associated n-alkanes, phthalates and polycyclic aromatic hydrocarbons (PAHs) were measured in sea surface microlayer (SML) and sub-surface water (SSL) samples collected in the coastal area of Terra Nova Bay, Antarctica, during the Austral spring 1998/1999. SML concentrations of the selected organic compounds were higher than SSL values and the enrichment factors were greater in the particulate phase than in the dissolved phase. During the same campaign, "fresh" snow samples, collected at different altitudes (from sea level up to 2670 m) near the coast on Mt Melbourne, immediately after a snowy event, were analysed in order to provide more information on air/sea exchange processes. The same classes of organic compounds found in sea water were also present in "fresh" snow samples. The surfactant fluorescent organic matter (SFOM), adsorbed on the microdrop aerosol surface, could be considered the main constituent of the enrichment and the carrier at higher altitudes of organic compounds. In fact, hydrocarbons (n-alkanes and PAHs), which are not surfactants like phthalates, could interact with SFOM and follow the same fate.     

Properties of agricultural aerosol released during wheat harvest threshing, plowing and sowing

This study shows for the first time a chemical and morphological characterization of agricultural aerosols released during three important agricultural operations： threshing, plowing and sowing. The field campaigns were carried out in the eastern part of the Po Valley, Italy, in summer and autumn 2009. The aerosol particles were sampled on quartz fiber filters and polytetrafluoroethylene membranes in order to allow Inductively Coupled Plasma Mass Spectrometry （ICP-MS） analysis and Scanning Electron Microscopy equipped with an Energy Dispersive X-ray Spectrometer （SEM-EDS） investigations, respectively. The organic carbon mass concentrations were measured with a Sunset Laboratory Dual-Optical Organic Carbone/Elemental Carbon （OCEC） Aerosol analyzer. The morphological and chemical analyses by SEM-EDS allowed recognizing four main particle classes： organic, silica, calcite and clay minerals. The organic particles contribute to both fine and coarse aerosol fractions up to ca. 50% for all three agricultural activities. This was also confirmed by OCEC analysis for fine fraction. Most of the agricultural aerosols, about 60%, were single particles and the remaining 40% were agglomerations of particles. The ICP-MS results showed that threshing and plowing produce more aerosol particles than sowing, which was characterized by important amounts of clay minerals produced from land soils.     

A field screening test for the assessment of concentrations and mobility of potentially toxic elements in soils: a case study on urban soils from Rome and Novi Sad

The increasing demand for environmental pollution control results in the development and use of new procedures for the determination of dangerous chemicals. Simple screening methods, which can be used directly in the field for a preliminary assessment of soil contamination, seem to be extremely advantageous. In our laboratory, we developed and optimized a rapid test for a preliminary evaluation of both the concentration and the mobility of some potentially toxic metals in soils. This screening test consists of a single extraction of the soil sample with a buffer solution, followed by the titration of the extracted solution with dithizone to determine the contents of bi-valent heavy metals (such as Pb, Cu, Zn, and Cd). This screening method was then directly applied in the field during the sampling campaign in the framework of an Italian–Serbian collaborative project, finalized in the study of metal availability in soils. The results obtained in the field with the rapid test were compared with those obtained in the laboratory following the conventional procedure commonly used to evaluate metal bioavailability (diethylenetriaminepentaacetic extraction). Moreover, selected samples were analyzed sequentially in the laboratory using the standardized BCR three-step sequential extraction procedure. The screening test gave results conceptually in good agreement with those obtained via the BCR procedure. These preliminary data show that the proposed screening test is a reliable method for the preliminary rapid evaluation of metal total concentrations and of potential metal mobility in soils, supporting sampling activities directly in the field.     

Maternal metabolomic profiling and congenital heart disease risk in offspring: A systematic review of observational studies

Aetiological understanding and screening methods for congenital heart disease (CHD) are limited. Maternal metabolomic assessment offers the potential to identify risk factors and biomarkers. We performed a systematic review (PROSPERO CRD42022308452) investigating the association between fetal/childhood CHD and endogenous maternal metabolites. Ovid-MEDLINE, Ovid-EMBASE and Cochrane Library were searched between inception and 06/09/2022. Case control studies included analysing maternal blood or urine metabolites in pregnancy or postpartum where there was foetal/childhood CHD. Risk of bias assessment utilised the Scottish Intercollegiate Guidelines Network methodology checklist and narrative synthesis was performed. A total of 134 records were screened with eight eligible studies (n = 3242 pregnancies, n = 842 CHD-affected offspring). Five studies performed metabolomic analysis in pregnancy. Metabolites distinguishing case and control groups spanned lipid, glucose and amino-acid pathways, with the development of sensitive risk prediction models. No single metabolite consistently distinguished cases and controls across studies. Three studies performed targeted analysis postnatally with altered lipid and amino acid metabolites and raised homocysteine and markers of oxidative stress identified in cases. Included studies reported small sample sizes, analysing different biosamples at variable time points using differing techniques. At present, there is not enough evidence to confidently associate maternal metabolomic profiles with offspring CHD risk. However, several identified pathways warrant further investigation.