Controlling Air Toxics Emissions From Remediation by Monitoring of Surrogate Parameters

Particulate matter (dust) from remediation and demolition sites may pose a potential risk to the nearby public due to the presence of various contaminants. Unfortunately, there are no good options for real‐time monitoring of metals, polychlorinated biphenyls, etc. in wind‐blown dust. A three‐tiered approach involving a combination of real‐time monitoring and off‐site analysis that has proved successful is described in this article. PM₁₀ is used as a surrogate parameter for metals and other nonvolatile pollutants, and real‐time monitoring is used to guide dust control measures. If dust emissions are controlled, air emissions of metals and other nonvolatile pollutants also are controlled. © 2014 Wiley Periodicals, Inc.     

Environmental monitoring and research in the Abisko area-an overview

This article gives an overview of the studies on the environment surrounding the Abisko Scientific Research Station in Swedish Lapland. The long-term monitoring of the Station on processes related to the climate, and to the physical, biotic, and chemical environmental conditions is particularly addressed. Some variables are recorded since more than 100 years. The obtained data in combination with results from short-term studies and manipulation experiments are important to understand past and future conditions of the ecosystems. This has practical applications for the planning of tourism, transports, reindeer herding, and for societal purposes.     

Factors influencing PM10 emissions from road pavement wear

Accelerated pavement wear is one of the major environmental disadvantages of studded tyres in northern regions and results in increased levels of PM₁₀. Measurements of PM₁₀ in a road simulator hall have been used to study the influence of pavement properties, tyre type and vehicle speed on pavement wear. The test set-up included three different pavements (one granite and two quartzite with different aggregate sizes), three different tyre types (studded, non-studded, and summer tyres) and different speeds (30–70 km h^?1). The results show that the granite pavement was more prone to PM₁₀ production compared to the quartzite pavements. Studded winter tyres yield tens of times higher PM₁₀ concentrations compared to non-studded winter tyres. Wear from summer tyres was negligible in comparison. It was also shown that wear is strongly dependent on speed; every 10 km h^?1 increase yielded an increase of the PM₁₀ concentration of 680 μg m^?3 in one of the simulator experiments.     

Triclosan in individual human milk samples from Australia

Triclosan is a chlorinated phenol ether that has been in widespread use as a broad-spectrum antibacterial agent for four decades. When compared to the limited international data available on human body burden of triclosan, results from a pooled blood study suggested that triclosan concentrations in Australia were a factor two higher than observed in Sweden. This study determined triclosan levels in individual human milk samples (n = 151) collected between 2002 and 2005 from primiparous Australian mothers. It provided the first report of population triclosan levels and individual variation in Australia and gave a measure of infant exposure via breast feeding. The distribution of triclosan concentration was positively skewed, with 7.2% of the samples below the LOQ, 66% with a concentration of less than or equal to 1.0 ng g⁻¹ fresh weight and the remaining samples above 1 ng g⁻¹ reaching a maximum concentration of 19 ng g⁻¹ fresh weight. The mean and median triclosan concentrations were 1.3 ± 2.7 ng g⁻¹ f.w. and 0.26 ng g⁻¹ f.w., respectively. The results of this study showed high variability in triclosan concentrations between individuals and no correlations with maternal age (p = 0.094), maternal weight (p = 0.971) or infant age at the time of sample collection (p = 0.621). A large number of samples contained low or non-quantifiable concentrations of triclosan and so, in Australia, ubiquitous background exposure due to environmental sources is low. This means that body burden can be influenced by an individual’s use of triclosan containing product. Given that triclosan containing product use is continuing, it is important that monitoring in both humans and the environment is continued and that triclosan containing products are adequately labeled so that an individual can choose to avoid exposure.     

Influence of input uncertainty on prediction of within-field pesticide leaching risks

Previous research has suggested that pesticide losses at the field scale can be dominated by a small proportion of the field area. The objective of this study was to investigate whether site-specific applications (i.e. avoiding high-risk areas) at the field scale can contribute to a reduction of pesticide leaching despite uncertainty in the underlying model-based leaching risk map. Using a meta-model of the dual-permeability model MACRO, the annual average pesticide leaching concentrations were estimated for 162 sample sites on a 47 ha field. The procedure was repeated for different scenarios describing different patterns of spatial variation of degradation half-lives and the partition coefficient to soil organic carbon. To account for interpolation uncertainty, maps of predicted pesticide leaching risk were produced by the method of sequential Gaussian simulation. The results of the case study show that larger reductions of predicted leaching were achieved by site-specific application than by that of a comparable uniform dose reduction. Hence, site-specific-applications may be a feasible method to reduce pesticide leaching at the field-scale providing that the model approach gives reasonable estimates of the spatial pattern of pesticide leaching.     

Use of a column leaching test to study the mobility of chlorinated HOCs from a contaminated soil and the distribution of compounds between soluble and colloid phases

An equilibrium and recirculation column test for hydrophobic organic chemicals (ER-H test) was used to study the leaching behaviour of chlorophenols (CPs), polychlorinated diphenyl ethers (PCDEs), polychlorinated dibenzofurans (PCDFs) and polychlorinated dibenzo-p-dioxins (PCDDs) from contaminated soil. A 50% increase in the pore water velocity was shown to have little or no effect on the mobility of CPs, PCDEs, PCDFs and PCDDs. The standard deviations of truly dissolved compounds, CPs, were between 19% and 65% between the tests. However, the repeatability of the ER-H test decreased with increases in the hydrophobicity of the studied compounds; the standard deviations for PCDEs, PCDFs and PCDDs ranged from 53% to 110%, 57% to 77% and 110% to 130%, respectively. The influence of colloids on the release of these compounds was also examined. Up to 30% of the CPs in the soil were leached, of which 1-3% were associated with colloids. The PCDEs, PCDFs and PCDDs were found to be preferably associated with the particulate fraction of the leachate, and less than 0.2% of these compounds were mobilised.     

Mobility of chloroaromatic compounds in soil: case studies of Swedish chlorophenol-contaminated sawmill sites

This paper summarizes recent studies on the environmental fate of chloroaromatic compounds in chlorophenol (CP)-contaminated soil and groundwater at Swedish sawmill sites. Relative proportions of CPs, polychlorinated phenoxy phenols (PCPPs), polychlorinated diphenyl ethers (PCDEs), polychlorinated dibenzo-p-dioxins (PCDDs), and polychlorinated dibenzofurans (PCDFs) were determined in preservatives, particulate organic matter (POM), dissolved organic matter (DOM), groundwater, and particles filtered from groundwater. All compound classes were found in the different compartments. The fraction of PCPPs, PCDEs, PCDDs, and PCDFs had increased in the soil samples relative to the proportions in the preservatives. This increase showed correlation with the hydrophobicity, that is, PCDDs had the largest increase. Similar correlation was found between hydrophobicity and the importance of partitioning to POM over DOM. The more water soluble compound group, CP, was found equally distributed between POM and DOM. For PCPPs, PCDEs, PCDDs, and PCDFs, the relative partitioning to POM increased with increased hydrophobicity. Despite the relative partitioning towards POM, compared with DOM, cotransport with DOM and suspended colloidal fractions was found to substantially increase the transport of these compounds in the groundwater samples.     

Sources, fate, and toxic hazards of oxygenated polycyclic aromatic hydrocarbons (PAHs) at PAH-contaminated sites

In this paper we show that oxygenated polycyclic aromatic hydrocarbons (oxy-PAHs) are important cocontaminants that should be taken into account during risk assessment and remediation of sites with high levels of PAHs. The presented data, which have been collected both from our own research and the published literature, demonstrate that oxy-PAHs are abundant but neglected contaminants at these sites. The oxy-PAHs show relatively high persistency and because they are formed through transformation of PAHs, their concentrations in the environment may even increase as the sites are remediated by methods that promote PAH degradation. Furthermore, we show that oxy-PAHs are toxic to both humans and the environment, although the toxicity seems to be manifested through other effects than those known to be important for polycyclic aromatic compounds in general, that is, mutagenicity and carcinogenicity. Finally, we present data that support the hypothesis that oxy-PAHs are more mobile in the environment than PAHs, due to their polarity, and thus have a higher tendency to spread from contaminated sites via surface water and groundwater. We believe that oxy-PAHs should be included in monitoring programs at PAH-contaminated sites, even if a number of other toxicologically relevant compounds that may also be present, such as nitro-PAHs and azaarenes, are not monitored. This is because oxy-PAH levels are difficult to predict from the PAH levels, because their environmental behavior differs substantially from that of PAHs, and oxy-PAHs may be formed as PAHs are degraded.