Decreased emission of nitrous oxide from delivery wards—case study in Sweden

The very potent greenhouse gas nitrous oxide (N₂O) is widely used as a mild anaesthetic for mothers in delivery work in Sweden. As a part of the Stockholm County Council environmental program it was decided in 2002 that the emissions should be drastically reduced. Different ways were theoretically evaluated, and catalytic splitting to nitrogen and oxygen gas (N₂ and O₂) was chosen for a demonstration installation. A Japanese commercial unit for treatment of mixed anaesthetic gases (Anesclean® from Showa Denko K.K.) was thoroughly modified and installed at the Karolinska University Hospital at Huddinge in Stockholm in 2004. The destruction of N₂O was optimised and studied for 2 years. Data from both collection and destruction are given in the article. Of the collected N₂O more than 95% was split to N₂ and O₂ in the very stable system. The overall emission decrease was mainly dependent on the share that could be collected in the specific exhaustion system as compared to the normal room ventilation. Life cycle assessment (LCA) and life cycle costing (LCC) were used to evaluate the actual environmental value and economical cost for the process. Important factors are pointed out.     

Mortality in the pheasant Phasianus colchicus during the breeding season

Summary Mortality of wild radio-tagged pheasants was analysed over six breeding seasons (1984–1987 and 1989–1990) in the Revinge area in southernmost Sweden. The aim of the study was to compare morphology and behaviour of birds found dead with those that survived the breeding season (from the first week of April to 30 June). The pheasants were kept over winter in an outdoor enclosure, equipped with radio transmitters, and released during the first week of April. In all, 49 females and 43 males were found dead and the average breeding-season mortality was 25% in males and 26% in females (not including birds that disappeared). The main predators were goshawk Accipiter gentilis and red fox Vulpes vulpes. Mortality among males peaked in late April whereas female mortality was highest in late May. Measurements of morphology included: length of tail, tarsus and wing, body mass and for males, spur length. The only morphological trait that differed between survivors and non-survivors was spur length in males; survivors had longer spurs. This difference was only found when allometric effects of age and body size on spur length were controlled for. Attractiveness and spacing behaviour of non-surviving males were recorded by telemetry from release until the last day of life, and compared with the average performance of survivors in that year. Non-surviving males moved shorter distances between days but did not differ from survivors in calling activity and attractiveness. Calling activity was higher in males that died early in the season compared to those dying late in the season. No differences were found between surviving and non-surviving females.     

Mate choice tactics and swarm size: a model and a test in a dance fly

In the dance flyEmpis borealis (L.) (Diptera: Empididae) females gather to swarm and males visit swarms for mating. A model was constructed, based on previously published data, simulating how males may choose among females of different sizes in swarms of different sizes. The focal question was, what influences the number of individuals in the swarm in this and possibly other swarming insects? The relationships between original swarm size and both the number of males arriving per minute and the proportion of males mating are both logarithmic. The model predicted that if these relationships were linear, or if males were able to judge absolute female size, the mean swarm size should increase and be at least four times as large as those found in the field. The only type of male mate choice strategy that gave rise to very large swarms (>25) was size-related choice (if males are able to assess the size of a female in relation to the entire population and not merely to the swarm). Furthermore, no swarming behaviour would occur if males mate independently of swarm size. Thus, the numbers of females attending a given swarm site are influenced by male arrival pattern, male preference for larger swarms, the inability of males to judge the absolute body size of females, and female polyandry. Males searching for mates seem to prefer larger swarms than females searching for a swarm to join, but the mean swarm size is primarily set by the swarm size preference of females. Optimal swarm size predicted from the model was 4.68±0.53 females. In order to test model predictions, 69 natural swarm sites were studied during one season. The mean swarm size was 4.85±4.54 females (median 4.03), and about 90% of swarms consisted of 11 females or fewer. Predicted and observed swarm size did not differ significantly.     

Analysis of polychlorinated naphthalenes in environmental samples

A method for the analysis of polychlorinated naphthalenes (PCN) has been developed. It is based on a simple clean-up procedure using activated carbon and a mass fragmentographic analysis using the negative ions formed during chemical ionization (NCI). Unlike the technical PCN products we have analyzed, a few isomerides containing four to six chlorine atoms dominate the PCN pattern in the environmental samples. The levels found in samples of biota from fresh water and marine environments in Sweden were between 3 and 62 ng PCN per gram lipid.     

Multivariate characterization of polycyclic aromatic hydrocarbons using semi-empirical molecule orbital calculations and physical data

Multivariate characterization of 60 polycyclic aromatic hydrocarbons (PAHs) was performed using data from literature and semi-empirical molecular orbital calculations. This dataset was analyzed by principal component analysis and projections to latent structures by means of partial least square. The PAHs were found to distribute in the chemical domain in several groups mainly governed by the number of aromatic rings and the number of five-membered rings. The multivariate model and training set was used to predict GC retention times on a non-polar column (DB-5). Using a 2(4) experimental design on the principal components of the chemical characterization model, a test set of PAHs was selected dependent on the distribution in the chemical domain of the PAHs. Such a test set is expected to improve selection of PAHs for future testing and modeling of both biological and chemical responses. Although the model of GC retention times was good, the precision was however not good enough for practical use.     

Margins of agricultural fields as habitats for pollinating insects

The occurrence of pollinating insects in field margins with different vegetation was studied in field experiments. Some margins were widened and vegetation was established by sowing of leguminous plants or was allowed to invade spontaneously. The communities of pollinating insects in reclaimed field margins were compared with those of a margin with a naturally diverse flora and an adjacent pasture. A beehive was placed in the area and the collection of pollen by the honey-bees was followed over the season in order to compare the bees' preferences with the supply of flowering plants available in the different experimental field margins. The sown leguminous plants were very attractive to most insect groups, especially bees and bumble-bees, and their pollen constituted an important part of the bees' total catch. The vegetation established by spontaneous succession especially attracted Syrphidae and other groups of Diptera. Butterflies were found in all vegetation types. It is concluded that small areas with flowering plants can give highly positive effects. The key question is how to avoid weed problems and keep the most attractive plant species with a minimum of cost and effort.     

Offspring recognition and the influence of clutch size on nest fostering among male sand gobies, Pomatoschistus minutus

When parental care is costly, parents should avoid caring for unrelated young. Therefore, it is an advantage to discriminate between related and unrelated offspring so that parents can make informed decisions about parental care. In the present study, we test the hypothesis that male sand gobies (Pomatoschistus minutus) recognize and differentially care for their own offspring when given a choice between a nest with sired eggs and a second nest with eggs sired by an unrelated male. The sand goby is a species with exclusive and costly paternal care. Male parasitic spawnings (e.g., sneaking) as well as nest takeovers by other males are common. Our results show that nests containing sired eggs were preferred and received significantly more care, as measured by nest building and nest occupancy, than nests with foreign eggs even when males cared for both nests. These findings suggest that males respond to paternity cues and recognize their own clutches. Relative clutch size also had a significant effect on male parental care. When sired clutches were larger than foreign clutches, males preferred to care for their own nest. In the few cases where males chose to take care of foreign nests, the foreign clutch was larger than their own clutch. Taken together, our results provide evidence that both paternity cues and clutch size influence parenting decisions among male sand gobies.     

Concentrations and Pools of Heavy Metals in Urban Soils in Stockholm,Sweden

The concentrations of heavy metals (Cd, Cr, Cu, Hg, Ni, Pb andZn) and arsenic (As) were surveyed and the metal pools estimatedin soils in Stockholm Municipality. The sampling sites were distributed all over the entire municipality with a higher sampling density in the city centre. Soils were sampled to a maximum depth of 25 to 60 cm. Soil texture, total-C content, electrical conductivity and pH were analysed. Heavy metal concentrations were determined after wet digestion with boiling7 M HNO₃.The results showed a wide range in heavy metal concentrations, as well as in other soil properties. The city centre soils constituted a rather homogeneous group whereas outside this areano geographical zones could be distinguished. These soils were grouped based on present land use, i.e. undisturbed soils, public parks, wasteland (mainly former industrial areas), and roadside soils. The city centre and wasteland soils generally hadenhanced heavy metal concentrations to at least 30 cm depth compared to park soils outside the city centre and rural (arable)soils in the region, which were used to estimate background levels. For example, the mean Hg concentration was 0.9 (max 3.3)mg kg^-1 soil at 0–5 cm and 1.0 (max 2.9) at 30 cm depth in the city centre soils, while the background level was 0,04 mg kg^-1. Corresponding values for Pb were 104 (max 444) and135 (max 339) mg kg^-1, at 0–5 and 30 cm, respectively, while the background level was 17 mg kg^-1.The average soil pools (0–30 cm depth) of Cu, Pb and Zn were 21,38 and 58 g m^-2 respectively, which for Pb was 3–4 timeshigher and for Cu and Zn 1.5–2 times higher than the backgroundlevel. The total amount of accumulated metals (down to 30 cm)in the city centre soils (4.5^*10 ⁶ m² public gardens and green areas) was estimated at 80, 1.1, 120 and 40 t for Cu, Hg, Pb and Zn, respectively. The study showed (1) thatfrom a metal contamination point of view, more homogeneous soilgroups were obtained based on present land use than on geographicdistance to the city centre, (2) the importance of establishing a background level in order to quantify the degree of contamination, and (3) soil samples has to be taken below the surface layer (and deeper than 30 cm) in order to quantify theaccumulated metal pools in urban soils.     

Chain-Length Shortening of Methyl Ethyl Hydroxyethyl Cellulose: An Evaluation of the Material Properties and Effect on Foaming Ability

During the past century, plastics have become a natural element in our every-day life. Lately however, an awareness about the fossil origin and often non-degradable nature of many plastics is rising. This has resulted in the emergence of some bio-based and/or biodegradable plastics, often produced from renewable resources. One possible candidate for bioplastics production could be found in cellulose. This paper aims at contributing information regarding a cellulose derivative, which could possibly be used in foamed plastics applications. Therefore, the reduction of the chain-length of a methyl ethyl hydroxyethyl cellulose (MEHEC), assessed by size exclusion chromatography, and the effect of chain-length on the foaming behaviour were studied. The foaming was accomplished with a hot-mould technique using aqueous polymer solutions. The generated steam was here used as the blowing agent and important parameters were polymer concentration and solution viscosity. The density of the produced foams was assessed and was in some cases comparable to that of commodity foams. It was found that reducing the chain-length enabled an increase of the initial polymer concentration for the foaming process. This is believed to be beneficial for creating more structurally stable foams of this type.     

Alternating Copolymers and Alternative Device Geometries for Organic Photovoltaics

Bathymetry, the underwater topography, is a fundamental property of oceans, seas, and lakes. As such it is important for a wide range of applications, like physical oceanography, marine geology, geophysics and biology or the administration of marine resources. The exact requirements users may have regarding bathymetric data are, however, unclear. Here, the results of a questionnaire survey and a literature review are presented, concerning the use of Baltic Sea bathymetric data in research and for societal needs. It is demonstrated that there is a great need for detailed bathymetric data. Despite the abundance of high-quality bathymetric data that are produced for safety of navigation purposes, the digital bathymetric models publicly available to date cannot satisfy this need. Our study shows that DBMs based on data collected for safety of navigation could substantially improve the base data for administrative decision making as well as the possibilities for marine research in the Baltic Sea.