The Expansion of Farm-Based Plantation Forestry in Vietnam

This study targets plantation forestry by farm households (small holders), which is increasing globally and most rapidly in China and Vietnam. By use of an interdisciplinary approach on three study sites in Vietnam, we examined the trends in farmers’ tree planting over time, the various pre-requisites for farm-based plantation forestry and its impact on rural people’s livelihood strategies, socio-economic status, income and security. The findings indicated a change from subsistence to cash-based household economy, diversification of farmers’ incomes and a transformation of the landscape from mainly natural forests, via deforestation and shifting cultivation, to a landscape dominated by farm-based plantations. The trend of transformation, over a period of some 30 years, towards cash crops and forestry was induced by a combination of policy, market, institutional, infrastructural and other conditions and the existence of professional farming communities, and was most rapid close to the industrial market.     

Determination of antibiotic substances in hospital sewage water using solid phase extraction and liquid chromatography/mass spectrometry and group analogue internal standards

A method for determination of antibiotics in hospital sewage water has been developed and validated. Analogue internal standards for fluoroquinolones, sulfonamides, trimethoprim, beta-lactams (penicillins and cephalosporins), nitroimidazoles and tetracyclines were successfully used for calibration and shown to generally improve precision compared to external calibration. Matrix components caused ion suppression/enhancement effects during the MS detection for all analytes studied. Two effects were observed: general suppression and short-term variations in the MS response. In the hospital sewage water large temporal variations in the analyte concentration were observed during the course of the sampling period (seven grab samples in 13 h). Analyte concentrations varied within the following ranges (in microg l(-1)): ciprofloxacin, 3.6-101.0; metronidazole, 0.1-90.2; sulfamethoxazole, 0.4-12.8; ofloxacin, 0.2-7.6; trimethoprim, 0.6-7.6; and doxycycline, 0.6-6.7.     

Temporal trend of bis(4-chlorophenyl) sulfone, methylsulfonyl-DDE and -PCBs in Baltic guillemot (Uria aalge) egg 1971-2001--a comparison to 4,4'-DDE and PCB trends

The dynamics of organohalogen contaminants and their metabolites are best studied over time by analysis of biota at high trophic levels. In this study, time trends, 1971-2001, of bis(4-chlorophenyl) sulfone (BCPS) and of methylsulfonyl-substituted metabolites of PCBs and 4,4'-DDE, were investigated in eggs of guillemot (Uria aalge) hatching in the Baltic Proper. Temporal trends of PCBs, trans-nonachlor, beta-HCH, 4,4'-DDT, and 4,4'-DDE were also assessed. Tris(4-chlorophenyl) methane (TCPMe), a 4,4'-DDT by-product, was detected in the eggs. The concentration of BCPS ranged between 2.6-0.76 microg/g on a lipid weight basis over the three decades and showed a significant 1.6% annual decrease. Three metabolites of PCBs, i.e. 3'-MeSO2-CB101, 4'-MeSO2-CB101 and 4-MeSO2-CB149, were quantified in all samples over time and showed an annual decrease of approximately 3% compared to MeSO2-DDE with a decrease of 8.9%. The methylsulfonyl-PCB and -DDE metabolites are eliminated more slowly than the persistent PCB congeners and 4,4'-DDE. Trans-nonachlor decreases by 16% compared to 19% and 9% for 4,4'-DDT and beta-HCH, respectively. The concentration of TCPMe in guillemot decreased by 8.2% per year. A linear relationship was found between TCPMe and 4,4'-DDE concentrations which supports the theory that TCPMe has an origin as a contaminant in commercial 4,4'-DDT products. The very slow decrease in BCPS concentrations is notable and remains to be explained. BCPS is still present at rather high concentrations in the guillemot eggs. The enantiomeric fraction varied between 0.27 and 0.67 which indicates less of a specific retention of the chiral MeSO2-PCBs in guillemot eggs than in grey seal tissues, for example. Independent of meta- or para-substitution of the sulfone group, the most accumulative atropisomer of each of four MeSO2-PCB pairs has been assigned an absolute R structure.     

Environmental evaluation of reuse of by-products as road construction materials in Sweden

Reuse of by-products in road construction is most often environmentally evaluated from the narrow perspective of the material itself, i.e. the material level. In this article, we argue that the current mainstream environmental evaluation of reuse of by-products in road construction should use wider system boundaries. In order to illustrate the importance of system boundaries to the final result, three additional levels that complement the material level, are applied to the environmental evaluation of reuse of by-products. In total these four levels of evaluation are, firstly, the material itself, mainly studied by leaching tests, secondly, the road environment studied by substance flow analysis, furthermore, a narrow life-cycle perspective and, finally, the industrial system level that addresses the reuse of by-products in a broader sense. Methods and tools applied to different levels emphasise different environmental aspects and consequently they are appropriate for addressing different questions. However, especially for the evaluation of environmental aspects on the industrial system level, there is a need to develop the methods. To apply these four levels to the evaluation would broaden the knowledge about the environmental impacts of the reuse of by-products. We argue that current leaching tests have to be complemented by the broader system boundaries used in substance flow studies and in life-cycle assessments in order to discuss the use of resources and environmental impacts from a wider perspective.     

Concentrations and Pools of Heavy Metals in Urban Soils in Stockholm,Sweden

The concentrations of heavy metals (Cd, Cr, Cu, Hg, Ni, Pb andZn) and arsenic (As) were surveyed and the metal pools estimatedin soils in Stockholm Municipality. The sampling sites were distributed all over the entire municipality with a higher sampling density in the city centre. Soils were sampled to a maximum depth of 25 to 60 cm. Soil texture, total-C content, electrical conductivity and pH were analysed. Heavy metal concentrations were determined after wet digestion with boiling7 M HNO₃.The results showed a wide range in heavy metal concentrations, as well as in other soil properties. The city centre soils constituted a rather homogeneous group whereas outside this areano geographical zones could be distinguished. These soils were grouped based on present land use, i.e. undisturbed soils, public parks, wasteland (mainly former industrial areas), and roadside soils. The city centre and wasteland soils generally hadenhanced heavy metal concentrations to at least 30 cm depth compared to park soils outside the city centre and rural (arable)soils in the region, which were used to estimate background levels. For example, the mean Hg concentration was 0.9 (max 3.3)mg kg^-1 soil at 0–5 cm and 1.0 (max 2.9) at 30 cm depth in the city centre soils, while the background level was 0,04 mg kg^-1. Corresponding values for Pb were 104 (max 444) and135 (max 339) mg kg^-1, at 0–5 and 30 cm, respectively, while the background level was 17 mg kg^-1.The average soil pools (0–30 cm depth) of Cu, Pb and Zn were 21,38 and 58 g m^-2 respectively, which for Pb was 3–4 timeshigher and for Cu and Zn 1.5–2 times higher than the backgroundlevel. The total amount of accumulated metals (down to 30 cm)in the city centre soils (4.5^*10 ⁶ m² public gardens and green areas) was estimated at 80, 1.1, 120 and 40 t for Cu, Hg, Pb and Zn, respectively. The study showed (1) thatfrom a metal contamination point of view, more homogeneous soilgroups were obtained based on present land use than on geographicdistance to the city centre, (2) the importance of establishing a background level in order to quantify the degree of contamination, and (3) soil samples has to be taken below the surface layer (and deeper than 30 cm) in order to quantify theaccumulated metal pools in urban soils.     

Environmental Monitoring and Research in the Abisko Area—An Overview

This article gives an overview of the studies on the environment surrounding the Abisko Scientific Research Station in Swedish Lapland. The long-term monitoring of the Station on processes related to the climate, and to the physical, biotic, and chemical environmental conditions is particularly addressed. Some variables are recorded since more than 100 years. The obtained data in combination with results from short-term studies and manipulation experiments are important to understand past and future conditions of the ecosystems. This has practical applications for the planning of tourism, transports, reindeer herding, and for societal purposes.     

Simulating solute transport in a structured field soil: uncertainty in parameter identification and predictions

Dual-permeability models have been developed to account for the significant effects of macropore flow on contaminant transport, but their use is hampered by difficulties in estimating the additional parameters required. Therefore, our objective was to evaluate data requirements for parameter identification for predictive modeling with the dual-permeability model MACRO. Two different approaches were compared: sequential uncertainty fitting (SUFI) and generalized likelihood uncertainty estimation (GLUE). We investigated six parameters controlling macropore flow and pesticide sorption and degradation, applying MACRO to a comprehensive field data set of bromide andbentazone [3-isopropyl-1H-2,1,3-benzothiadiazin-4(3H)-one-2,2dioxide] transport in a structured soil. The GLUE analyses of parameter conditioning for different combinations of observations showed that both resident and flux concentrations were needed to obtain highly conditioned and unbiased parameters and that observations of tracer transport generally improved the conditioning of macropore flow parameters. The GLUE "behavioral" parameter sets covered wider parameter ranges than the SUFI posterior uncertainty domains. Nevertheless, estimation uncertainty ranges defined by the 5th and 95th percentiles were similar and many simulations randomly sampled from the SUFI posterior uncertainty domains had negative model efficiencies (minimum of -3.2). This is because parameter correlations are neglected in SUFI and the posterior uncertainty domains were not always determined correctly. For the same reasons, uncertainty ranges for predictions of bentazone losses through drainflow for good agricultural practice in southern Sweden were 27% larger for SUFI compared with GLUE. Although SUFI proved to be an efficient parameter estimation tool, GLUE seems better suited as a method of uncertainty estimation for predictions.     

Screening of environmental pressure from products in the Swedish railway infrastructure: Implications for strategic environmental management

This paper proposes a method to be used in environmental reviews as an initial tool for estimating upstream environmental pressures from material use in organisations dealing mostly with construction materials. Upstream environmental pressures are often omitted in environmental reviews from organisations and instead tend to be site specific, with a limited life-cycle perspective. This paper uses the Swedish National Rail Authority as a case to present the approach. An energy indicator is used to estimate the environmental pressure of material use.In the studied building project, a small set of products contribute to a major part of the material use and the material-related energy use. The energy use is almost exclusively of nonrenewable energy carriers. The three most important products are all homogenous and non-complex, which makes the energy indicator well suited for the analysis. The organisation can use the results to focus on the most important products and also to see which parts of the organisation contribute to the material-related energy use. Rail traffic in Sweden is almost exclusively from non-fossil-based energy carriers. This highlights the importance of the infrastructure to the overall environmental pressure of the railway. Consequently, if road transport were to shift away from fossil fuels, railways earlier environmental advantages would diminish, since research suggests that railway infrastructure is more energy intensive than road infrastructure.     

Decreased emission of nitrous oxide from delivery wards—case study in Sweden

The very potent greenhouse gas nitrous oxide (N₂O) is widely used as a mild anaesthetic for mothers in delivery work in Sweden. As a part of the Stockholm County Council environmental program it was decided in 2002 that the emissions should be drastically reduced. Different ways were theoretically evaluated, and catalytic splitting to nitrogen and oxygen gas (N₂ and O₂) was chosen for a demonstration installation. A Japanese commercial unit for treatment of mixed anaesthetic gases (Anesclean® from Showa Denko K.K.) was thoroughly modified and installed at the Karolinska University Hospital at Huddinge in Stockholm in 2004. The destruction of N₂O was optimised and studied for 2 years. Data from both collection and destruction are given in the article. Of the collected N₂O more than 95% was split to N₂ and O₂ in the very stable system. The overall emission decrease was mainly dependent on the share that could be collected in the specific exhaustion system as compared to the normal room ventilation. Life cycle assessment (LCA) and life cycle costing (LCC) were used to evaluate the actual environmental value and economical cost for the process. Important factors are pointed out.     

Analysis of polychlorinated naphthalenes in environmental samples

A method for the analysis of polychlorinated naphthalenes (PCN) has been developed. It is based on a simple clean-up procedure using activated carbon and a mass fragmentographic analysis using the negative ions formed during chemical ionization (NCI). Unlike the technical PCN products we have analyzed, a few isomerides containing four to six chlorine atoms dominate the PCN pattern in the environmental samples. The levels found in samples of biota from fresh water and marine environments in Sweden were between 3 and 62 ng PCN per gram lipid.