Quantifying potential profit from material recycling: a case study in brick manufacturing

Efforts to increase the use of waste materials as substitutes for virgin primary materials in industry are considered an important step toward sustainable industrial development. Some industries, however, have struggled to increase the recycling of materials for a variety of reasons. This study proposes a new approach to searching for recycling across industry boundaries. By focusing on an entire industry, the locations where economic and environmental benefit exists can be identified. This research identifies brick manufacturing facilities in the United States that are most likely to gain substantial economic benefit from the recycling of waste products. The results of this case study indicate that an industry-based approach can provide economically feasible pathways towards sustainable industrial development, especially for data rich manufacturing nations like the United States.     

Wetlands mitigation: Partnership between an electric power company and a federal wildlife refuge

Nine hectares (23 acres) of a degraded section of Patuxent Research Refuge in Laurel, Maryland, USA, were converted to wetland habitat by the Baltimore Gas and Electric Company in 1994. The wetlands were created as mitigation for 5.7 ha (14 acres) of wetlands that were impacted as part of the construction of an 8.5-km (5.3-mile) 500-kV overhead transmission line on the refuge. The area consists of a created forested wetland of 5.5 ha (13.5 acres), a seasonally inundated green-tree reservoir of 7.6 ha (6.5 acres), and an impounded pond wetland of 1.2 ha (3 acres). Construction included the planting of 6131 trees, 4276 shrubs, and 15,102 emergent plants. Part of the site has been studied intensively since completion and survival of trees and shrubs after two years was 88%. Measurements of these transplants have shown growth greater than on other created sites in Maryland. Grasses and other herbaceous vegetation were dominant plants in the meter-square plots in the first two years of sampling of the created forested wetland. Wildlife surveys for birds, mammals, amphibians, and reptiles have revealed diverse communities. Although these communities represent species consistent with open habitat, more typical forest species should colonize the area as it undergoes succession into a more mature forested wetland. The creation, management, and research of this mitigation site represents an excellent example of a partnership between a private electric power company and a federal wildlife refuge. This partnership has increased local biodiversity and improved regional water quality of the Patuxent River and the Chesapeake Bay.     

AQUATIC ORGANISMS RESPONSE TO SEVERE STRESS FOLLOWING ACUTELY SUBLETHAL TOXICANT EXPOSURE1

ABSTRACT: Snails, Goniobasis livescens (Menke), were exposed to acutely sublethal concentrations of p-nitrophenol and the lampricide, 3-triflourmethyl-4 nitrophenol(TFM), and then to acutely lethal thermal shocks. The same species were also exposed to acutely sublethal concentrations of zinc followed by exposure to acutely lethal concentrations of p-nitrophenol; and to acutely sublethal concentrations of TFM followed by exposure to acutely lethal concentrations of zinc. Brown trout, Salmo trutta, were exposed to acutely sublethal concentrations of TFM and then to an acutely lethal thermal shock. Results of these experiments indicate that prior exposure to acutely sublethal toxicant concentrations may reduce survival time for a subsequent exposure to acutely lethal concentrations of a second toxicant (e.g., snails exposed to Zn⁺⁺ then p-nitrophenol) but neither prior or concomitant exposure to acutely sublethal toxicant concentrations insures that the median survival time for a lethal exposure will be significantly altered (e.g., snails exposed to 0.2 × 48 hour LC50 for TFM then Zn⁺⁺). However, some acutely sublethal concentrations of a toxicant may significantly alter survival time of snails to a lethal concentration of a different toxicant (e.g., exposure to 0.4 × 48 hour LC50 TFM then a lethal dose of Zn⁺⁺). The brown trout exposed to an acutely sublethal concentration of TFM and then an acutely lethal thermal shock did have significantly altered survival patterns.     

Attitudes Toward Wilderness Study Areas: A Survey of Six Southeastern Utah Counties

Southeastern Utah is a region of world-renowned red-rock sandstone formations, large tracts of federal public land, rural communities centered on agriculture and extractive industries, and is often at the epicenter of environmental protection efforts in the western United States. Environmental groups have proposed formal Wilderness designations for much of the regions public land—proposals that have been actively fought by rural community leaders who do not want large areas locked-up from traditional livelihood and recreational uses. The debate over wilderness designation in the region has been characterized in the media as one that is particularly contentious and polarizing. A survey of southeastern Utah residents was conducted in order to better understand this conflict. The survey focused on attitudes toward wilderness designation and management. We found that residents of southeastern Utah have negative attitudes towards the designation and management of Wilderness Study Areas. We propose that these attitudes should be carefully considered and engaged in future policy and management decisions. We suggest that negative opinions expressed by residents of southeastern Utah are not directed primarily at the concept of environmental protection but rather at the strong perception that these programs and initiatives have been carried out in a heavy-handed manner and dominated by outside influences that have overwhelmed local voices.     

An empirical investigation of European drivers' self-assessment

PROBLEM: Evaluating motorists through self-assessment has attracted much interest in recent literature, which is mainly due to the profound impact various parameters of self-assessment can have on the way motorists deal with hazardous traffic situations. Much of the previous work in this area has been hampered both by the lack of adequate sample sizes and, because of the small samples, the evaluation methodologies used. METHOD: This paper extends previous research in two significant directions: (a) it uses the SARTRE 2 database, which provides more than 17,000 questionnaires from most European countries; and (b) it employs the ordered probit modeling approach, which recognizes the latent nature of self-assessment and explicitly links its dimensions to a set of relevant explanatory variables such as age, gender, region, and income. RESULTS: The results indicate that drivers who rate themselves as both more dangerous and faster than others are, generally, younger men, with higher incomes, break the speed limit more frequently, avoid wearing seat belts, and have been involved in more accidents in the past than other drivers. Interestingly, more experienced and more highly educated drivers assess their driving as less dangerous, but admit to driving faster than other drivers. IMPACT ON INDUSTRY: The methodology used and the results obtained can be a significant help in identifying drivers with high and low self-assessment ratings, which can be useful in planning and implementing road safety information campaigns.     

Prioritizing Abandoned Coal Mine Reclamation Projects Within the Contiguous United States Using Geographic Information System Extrapolation

Coal mine reclamation projects are very expensive and require coordination of local and federal agencies to identify resources for the most economic way of reclaiming mined land. Location of resources for mine reclamation is a spatial problem. This article presents a methodology that allows the combination of spatial data on resources for the coal mine reclamation and uses GIS analysis to develop a priority list of potential mine reclamation sites within contiguous United States using the method of extrapolation. The extrapolation method in this study was based on the Bark Camp reclamation project. The mine reclamation project at Bark Camp, Pennsylvania, USA, provided an example of the beneficial use of fly ash and dredged material to reclaim 402,600 sq mi of a mine abandoned in the 1980s. Railroads provided transportation of dredged material and fly ash to the site. Therefore, four spatial elements contributed to the reclamation project at Bark Camp: dredged material, abandoned mines, fly ash sources, and railroads. Using spatial distribution of these data in the contiguous United States, it was possible to utilize GIS analysis to prioritize areas where reclamation projects similar to Bark Camp are feasible. GIS analysis identified unique occurrences of all four spatial elements used in the Bark Camp case for each 1 km of the United States territory within 20, 40, 60, 80, and 100 km radii from abandoned mines. The results showed the number of abandoned mines for each state and identified their locations. The federal or state governments can use these results in mine reclamation planning.     

Progress in renewable energy

This paper provides an overview of some of the key technological and market developments for leading renewable energy technologies--wind, wave and tidal, photovoltaics (PV) and biomass energy. Market growth, innovation and policy are closely interrelated in the development of renewables and the key issues in each area are explored for each of the main types of renewable energy technology. This enables the prospects for future development and cost reduction to be considered in detail. Key issues for policy are outlined.     

FLOW-THROUGH MICROCUVETTE FOR FLUOROMETRIC DETERMINATION OF CHLOROPHYLL1

This paper describes a flow-through microcuvette for determination of chlorophyll with the Turner Designs model 10 fluorometer. The device approximately doubles the speed of repetitive chlorophyll determinations. With a single-standard calibration procedure, chlorophyll concentrations in the approximate range of 0.01-2.0 ug/mL (in solvent extracts) can be determined with a relative error of less than 3 percent.