Hydroponic root mats for wastewater treatment—a review

Hydroponic root mats (HRMs) are ecotechnological wastewater treatment systems where aquatic vegetation forms buoyant filters by their dense interwoven roots and rhizomes, sometimes supported by rafts or other floating materials. A preferential hydraulic flow is created in the water zone between the plant root mat and the bottom of the treatment system. When the mat touches the bottom of the water body, such systems can also function as HRM filter; i.e. the hydraulic flow passes directly through the root zone. HRMs have been used for the treatment of various types of polluted water, including domestic wastewater; agricultural effluents; and polluted river, lake, stormwater and groundwater and even acid mine drainage. This article provides an overview on the concept of applying floating HRM and non-floating HRM filters for wastewater treatment. Exemplary performance data are presented, and the advantages and disadvantages of this technology are discussed in comparison to those of ponds, free-floating plant and soil-based constructed wetlands. Finally, suggestions are provided on the preferred scope of application of HRMs.     

Monitoring of iodinated X-ray contrast media in surface water

A monitoring programme was carried out in order to determine iodinated X-ray contrast media (ICM) in the River Danube and to investigate the raw water quality for drinking water production at Langenau waterworks. The study revealed that the maximum concentrations of ICM (over 500 ng l(-1) for diatrizoic acid and iopamidol) were found in 2h-composite samples taken from the downstream of the Ulm/Neu-Ulm metropolitan area. By means of a concentration profile over one month the highest ICM concentrations were observed on weekdays. The extended data evaluation with principal component analysis shows that the upstream and downstream samples had different pattern of variations in ICM concentration and also demonstrates a clear change in ICM composition by the discharge of municipal wastewater. In addition to load profiles of ICM, time-dependent plots of principal component 1 exhibited peaks, indicating a short-term discharge of ICM between the two sampling sites. In conclusion, a point source for ICM contamination between the sampling sites in Ulm upstream and Leipheim downstream seems to be the reasonable explanation for peak ICM concentrations. Due to the observed high variations of ICM concentrations in river, the evaluation of natural waters by means of a single analysis is not representative.     

How to Constrain Multi‐Objective Calibrations of the SWAT Model Using Water Balance Components

Accurate discharge simulation is one of the most common objectives of hydrological modeling studies. However, a good simulation of discharge is not necessarily the result of a realistic simulation of hydrological processes within the catchment. We propose an evaluation framework that considers both discharge and water balance components as evaluation criteria for calibration of the Soil and Water Assessment Tool (SWAT). In this study, we integrated average annual values of surface runoff, groundwater flow, and evapotranspiration in the model evaluation procedure to constrain the selection of good model runs for the Little River Experimental Watershed in Georgia, United States. For evaluating water balance and discharge dynamics, the Nash‐Sutcliffe efficiency (NSE) and percent bias (PBIAS) were used. In addition, the ratio of root mean square error and standard deviation of measured data (RSR) was calculated for individual segments of the flow duration curve to identify the best model runs in terms of discharge magnitude. Our results indicate that good statistics for discharge do not guarantee realistic simulations of individual water balance components. Therefore, we recommend constraining the ranges of water balance components to achieve a more realistic simulation of the entire hydrological system, even if tradeoffs between good statistics for discharge simulations and reasonable amounts of the water balance components are unavoidable. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.     

Phosphorus recovery from municipal and fertilizer wastewater: China's potential and perspective

Phosphorus (P) is a limited resource, which can neither be synthesized nor substituted in its essential functions as nutrient. Currently explored and economically feasible global reserves may be depleted within generations. China is the largest phosphate fertilizer producing and consuming country in the world. China''s municipal wastewater contains up to 293,163 Mg year of phosphorus, which equals approximately 5.5% of the chemical fertilizer phosphorus consumed in China. Phosphorus in wastewater can be seen not only as a source of pollution to be reduced, but also as a limited resource to be recovered. Based upon existing phosphorus-recovery technologies and the current wastewater infrastructure in China, three options for phosphorus recovery from sewage sludge, sludge ash and the fertilizer industry were analyzed according to the specific conditions in China.     

Coastal flooding,climate change and environmental justice: identifying obstacles and incentives for adaptation in two metropolitan Boston Massachusetts communities

We explored the possible future impacts of increased coastal flooding due to sea level rise and the potential adaptation responses of two urban, environmental justice communities in the metropolitan Boston area of Massachusetts. East Boston is predominantly a residential area with some industrial and commercial activities, particularly along the coastal fringe. Everett, a city to the north of Boston, has a diversified industrial and commercial base. While these two communities have similar socioeconomic characteristics, they differ substantially in the extent to which residents would be impacted by increased coastal flooding. In East Boston, a large portion of residents would be flooded, while in Everett, it is the commercial/industrial districts that are primarily vulnerable. Through a series of workshops with residents in each community, we found that the target populations do not have an adaptation perspective or knowledge of any resources that could assist them in this challenge. Furthermore, they do not feel included in the planning processes within their communities. However, a common incentive for both communities was an intense commitment to their communities and an eagerness to learn more and become actively engaged in decisions regarding climate change adaptation. The lessons that can be applied to other studies include 1) images are powerful tools in communicating concepts, 2) understanding existing cultural knowledge and values in adaptation planning is essential to the planning process and 3) engaging local residents at the beginning of the process can create important educational opportunities and develop trust and consensus that is necessary for moving from concept to implementation.     

Daughters inherit colonies from mothers in the 'living-fossil' ant Nothomyrmecia macrops

Newly mated queens of monogynous (single queen) ants usually found their colonies independently, without the assistance of workers. In polygynous (multiple queen) species queens are often adopted back into their natal nest and new colonies are established by budding. We report that the Australian 'living-fossil' ant, Nothomyrmecia macrops, is exceptional in that its single queen can be replaced by one of the colony's daughters. This type of colony founding is an interesting alternative reproductive strategy in monogynous ants, which maximizes fitness under kin selection. Successive queen replacement results in a series of reproductives over time (serial polygyny), making these colonies potentially immortal. Workers raise nieces and nephews (relatedness h 0.375) the year after queen replacement. Although N. macrops is 'primitive' in many other respects, colony inheritance is likely to be a derived specialization resulting from ecological constraints on solitary founding.     

Residual dynamics of thiacloprid in medical herbs marjoram, thyme, and camomile and in soil

Thiacloprid is a new insecticide of the chloronicotinyl family. To assess its risk after application, residual characteristics of thiacloprid in marjoram, thyme, and camomile and in soil were studied under field conditions. The active ingredient was extracted from the plant material using a mixture of acetone-water. After filtration, the extract was concentrated to the aqueous phase, diluted with water, and portioned against ethyl acetate on a matrix solid phase dispersion column. Thiacloprid was extracted from soil using a mixture of methanol-water, filtered, and re.extracted （clean up） with dichloromethane. The residues were quantified using HPLC-MS-MS. The methods were validated by recovery experiments. Thiacloprid residues in marjoram, thyme, and camomile and in soil persisted beyond 10, 14, 14, and 21 d but no residues were detected after 14, 21, 21, and 28 d, respectively. The data obtained in this study indicated that the biexponential model is more suitable than the first-order function to describe the decline of thiacloprid in fresh marjoram, fresh thyme, and dried camomile flowers with half-life （t1/2） of 1.1, 0.7, and 1.2 d, respectively. However, both the first-order function and biexponential model were found to be applicable for dissipation of thiacloprid in soil with almost the same t1/2 values of 3.5 and 3.6 d. The results indicated that thiacloprid dissipates rapidly and does not accumulate in the tested herbs and in soil.     

Dynamics of skeleton formation in the Lake Baikal sponge Lubomirskia baicalensis. Part II. Molecular biological studies

In a preceding study it has been reported that the freshwater sponge Lubomirskia baicalensis, living in Lake Baikal (East Siberia), is composed of spicules forming a characteristic pattern which follows radiate accretive growth. Here we report that the spicules are synthesized by the enzyme silicatein, a protein which is related to cathepsin L. The cDNAs for silicatein and the related cathepsin L were isolated and used as probes to show that the mRNA levels of silicatein in the bases of the spicule skeleton of the animals are low, while the mRNA level of cathepsin L in this region exceeds that of the growing zone. This is the first comprehensive study on the importance of the axial filament/silicatein as an essential structural and functional component determining the growth and stability of demosponge spicules.Note: Sequences from Lubomirskia baicalensis have been deposited in the EMBL/GenBank; cDNAs for the putative silicatein (LBSILICA) are deposited under the accession no. AJ786771 and for cathepsin L (LBCATL) under the accession no. AJ786770.     

Integrating energy efficiency performance in production management – gap analysis between industrial needs and scientific literature

For governments and for manufacturing companies, global warming, rising energy prices, and customers’ increasing ecological awareness have pushed energy efficient manufacturing to the top of the agenda. Governments and companies are both striving to identify the most effective measures to increase energy efficiency in manufacturing processes. Based on results of a recent EU-funded roadmapping project, this paper highlights the needs of industrial companies for integrating energy efficiency performance in production management. First, it analyses concepts and tools for measurement, control and improvement of energy efficiency in production management proposed in literature. Second, the paper outlines that ICT tools and standardization are important enablers for energy efficient manufacturing. Third, industrial needs in these areas are presented based on expert interviews. The industrial needs thus identified are contrasted with concepts proposed in literature to point out the implementation gaps between practice and theory. The paper demonstrates that there exists a gap between the solutions available and the actual implementation in industrial companies. It concludes by deriving requirements for energy management in production that future collaborative research projects should address.     

Turner syndrome-omphalocele association: Incidence,karyotype, phenotype and fetal outcome

Objective

Omphalocele is known to be associated with genetic anomalies like trisomy 13, 18 and Beckwith–Wiedemann syndrome, but not with Turner syndrome (TS). Our aim was to assess the incidence of omphalocele in fetuses with TS, the phenotype of this association with other anomalies, their karyotype, and the fetal outcomes.

Method

Retrospective multicenter study of fetuses with confirmed diagnosis of TS. Data were extracted from a detailed questionnaire sent to specialists in prenatal ultrasound.

Results

680 fetuses with TS were included in this analysis. Incidence of small omphalocele in fetuses diagnosed ≥12 weeks was 3.1%. Including fetuses diagnosed before 12 weeks, it was 5.1%. 97.1% (34/35) of the affected fetuses had one or more associated anomalies including increased nuchal translucency (≥3 mm) and/or cystic hygroma (94.3%), hydrops/skin edema (71.1%), and cardiac anomalies (40%). The karyotype was 45,X in all fetuses. Fetal outcomes were poor with only 1 fetus born alive.

Conclusion

TS with 45,X karyotype but not with X chromosome variants is associated with small omphalocele. Most of these fetuses have associated anomalies and a poor prognosis. Our data suggest an association of TS with omphalocele, which is evident from the first trimester.