Development of a Dynamic Aquatic Model (DynA Model): Estimating Temporal Emissions of DDT to Lake Maggiore (N. Italy)

- DOI: http://dx.doi.org/10.1065/espr2006.01.009 Background, Aims and Scope Most existing models used to describe the fate of chemicals in surface water and sediment generally consider a 'static scenario', in which a contaminant is discharged at a constant rate and environmental input parameters do not change during the simulation time. This approach is not suitable in environmental scenarios characterized by daily or periodic changes of several input parameters. The aim of this study is to estimate approximate emissions of DDT lo Lake Maggiore using a new surface water model, (DynA Model) that describes the fate of a chemical in a dynamic scenario. Methods The model is developed on the grounds of an existing and validated model (QWASI). A numerical solution was adopted to build the fully dynamic version of the model. Results and Discussion The model was applied to Lake Maggiore emitting DDT at a constant rate until steady-state was reached. Emissions were stopped and later sporadic 'pulse' emissions were added. This was done to calculate the amount of DDT needed to simulate concentrations close to those measured in water and sediments. This allowed the evaluation of the order of magnitude of emissions. An uncertainty analysis for sediment resuspension was also performed, given the lack of measured resuspension rates. Conclusion The model showed the time response of the Lake Maggiore system to varying emission scenarios and provided what are regarded as reasonable estimates of DDT emissions. The model demonstrated the importance of sediment-water exchange. Recommendation and Outlook In order to better calculate DDT concentrations the model should be run with different discharge scenarios to clarify the time trends of concentrations, possibly with the use of different sets of measured data (such as biota and sediment deposition/resuspension rates).     

Silvicultural management in maintaining biodiversity and resistance of forests in Europe-the Mediterranean region

Outstanding features of Mediterranean forest area are highlighted with a special reference to biodiversity and connections with forest management. The naturally originated and anthropogenic progress of the mosaic-like evolution, as well as the man-induced factors and natural constraints are described. The past and present close linkages between management and biodiversity are then analysed by means of a few, outstanding cases typical of the geographical region. The management shift on increasing economically marginal forest area (abandonment) appears to be the major force currently driving connections with inherent and associated biodiversity. The goals following the new-established environmental roles of forests have shifted towards adaptive management, namely the implementation of locally tailored rules in accordance with prominent forest functions. Key priorities to face up to the new scenarios are then discussed.Economic and policy implications are addressed with reference to multipurpose forestry and the related annual flow of outputs. It is shown the role of water-related services, as well the provision of various non-wood forest products and public goods in addition to wood and other traditional forest outputs. Reference is also made to the dualism between the Northern and the South-Eastern Mediterranean countries due to different level of economic development (and pressure of forest resources) together with very different institutional structures, i.e. public ownership in Southern and South-Eastern Mediterranean countries. Nevertheless, the situation is going to become more harmonious in the medium run by growing economic development, the affirmation of local rights on forest resources, globalisation and, above all, rural out migration and exchanges of peoples confirming the traditional role of the Mediterranean Region at cross road of South-North and Eastern-Western cultures.     

Occurrence of potential bacterial pathogens in coastal areas of the Adriatic Sea

A monitoring program was carried out in bathing waters along the sea-coast of the Adriatic Sea. The investigation was aimedat obtaining a quali-quantitative picture of microorganisms ofanthropic origin and of a more strictly autochthonous origin and at verifying the existence of possible reciprocal correlations and combinations of relationship between them. Results showed that the concentrations of indicators of faecal contamination, whether within or over the values established by legislation, are not always related to the presence and density of microorganisms of environmental origin but the regression modelsused can help to describe how these latter microorganisms can bein relation to levels of the other parameters. The difficultyis evident of the predictability of health effects swimming-associated; for this reason more complex models that are currently used should be taken into account for minimising the risk for bathers.     

Glacial-interglacial changes in the occurrence of Pb, Cd, Cu and Zn in Vostok Antarctic ice from 240 000 to 410 000 years BP

Lead (Pb), cadmium (Cd), copper (Cu) and zinc (Zn) have been measured by electrothermal atomic absorption spectrometry in various sections of the 3623 m deep ice core drilled at Vostok, in central East Antarctica. The sections were dated from 240 to 410 kyear BP (Marine Isotopic Stages (MIS) 7.5 to 11.3), which corresponds to the 3rd and 4th glacial-interglacial cycles before present. Concentrations are found to have varied greatly during this 170 kyear time period, with high concentration values during the coldest climatic stages such as MIS 8.4 and 10.2 and much lower concentration values during warmer periods, such as the interglacials MIS 7.5, 9.3 and 11.3. Rock and soil dust were the dominant sources for Pb, whatever the period, and for Zn and Cu and possibly Cd during cold climatic stages. The contribution from volcanic emissions was important for Cd during all periods and might have been significant for Cu and Zn during warm periods.     

Increasingly warm summers in the Euro–Mediterranean zone: mean temperatures and extremes

The recent increase in European temperatures led to a strong enhancement in the occurrence of extremely warm events, with relevant consequences for environment and everyday life. Here, we investigate the evolution of very intense warm and cold events in a south-western European zone during 1961–2007 at a seasonal level. Special attention is given to summertime when warming is the most pronounced. Using a previously developed theoretical model, we discuss how the average properties and long-term trends observed in probability density functions of daily temperatures can explain changes in the frequency of severe, isolated events. In this perspective, the recent intensification of extremely warm events, especially experienced by the Mediterranean zone, is proved to be well consistent with a pure shift of seasonal mean temperatures. On the other hand, any change in the second and higher distributional moments of daily temperatures is ruled out by the data, whereas the average values of these properties, that is, variability and asymmetry, do play a role by shaping the temporal behavior of very intense events.     

Development of low-cost ammonia gas sensors and data analysis algorithms to implement a monitoring grid of urban environmental pollutants

The present study is focused on the implementation of a novel, low cost, urban grid of nanostructured chemresistor gas sensors for ammonia concentration ([NH(3)]) monitoring, with NH(3) being one of the main precursors of secondary fine particulate. Low-cost chemresistor gas sensors based on carbon nanotubes have been developed, their response to [NH(3)] in the 0.17-5.0 ppm range has been tested, and the devices have been properly calibrated under different relative humidity conditions in the 33-63% range. In order to improve the chemresistor selectivity towards [NH(3)], an Expert System, based on fuzzy logic and genetic algorithms, has been developed to extract the atmospheric [NH(3)] (with a sensitivity of a few ppb) from the output signal of a model chemresistor gas sensor exposed to an NO(2), NO(X) and O(3) gas mixture. The concentration of these pollutants that are known to be the most significant interfering compounds during ammonia detection with carbon nanotube gas sensors has been tracked by the ARPA monitoring network in the city of Milan and the historical dataset collected over one year has been used to train the Expert System.     

Evaluation of a portable nephelometer against the Tapered Element Oscillating Microbalance method for monitoring PM(2.5)

Monitoring personal exposure to particle matter (PM(2.5)) in ambient air requires performing measurements using portable monitors. In this work, the portable nephelometer SidePak? AM510 Personal Aerosol Monitor manufactured by TSI Inc. was evaluated against a Tapered Element Oscillating Microbalance (TEOM) equipped with a Filter Dynamics Measurements System (FDMS). Conventionally, the SidePak is calibrated with respect to the Arizona Road Test Dust and then multiplied by an environmental calibration factor to yield mass concentration. To adapt this calibration to specific field conditions, we present an implementation of this calibration by introducing a growing factor correction which takes into account relative humidity and the dry and wet portions of the refractive index estimated from TEOM-FDMS measurements. PM(2.5) sampling with several SidePaks AM510 was carried out in background and rural sites in the Po Valley (Italy). Modeled SidePak data were plotted vs. reference TEOM-FDMS data which show a good agreement.     

Determination of 28 pesticides applied on two tomato cultivars with a different surface/weight ratio of the berries,using a multiresidue GC-MS/MS method

The behavior of 28 pesticides on two tomato cultivars with a different surface/weight (S/W) ratio of the berries (S/W, Birikino vs. Tombola) was studied, in order to provide appropriate indications about their persistence on crops reaching the pre-harvest interval (PHI). Quantitative analysis was performed using a GC MS/MS method. Birikino cv. (BIR) was a “cherry type tomato” with a double S/W ratio compared with Tombola cv. (TOM). The results showed a different pesticide behavior. Azoxystrobin, Boscalid, Bupirimate, Difenoconazole, Etofenprox, Iprodione, Mepanipyrim, Myclobutanil, Tebuconazole, Zoxamide, Metalaxyl M, Pyrimethanil, Tetraconazole, Benalaxyl, Cyprodinil, Fenamidone, Famoxadone and Fludioxonil immediately after treatments showed residues on BIR higher than TOM, and this behavior is consistent with its greater exposed surface. BIR showed higher decay rates of these pesticides during the whole trial, nevertheless residue averages remained higher than TOM reaching the time of harvest. Residues at the PHI were all below their Maximum Residue Levels (MRLs), but data indicated that they could exceed their legal limits especially if the above-mentioned active ingredients were employed more than once per crop cycle on cherry type tomatoes. As regards to Chlorpyrifos, Chlorpyrifos methyl, Triadimenol, Pyridaben and Tebufenpyrad, no different residual behavior related to S/W ratio of the cultivars was observed. Even in this case, residues at the PHI were all below MRLs. As for Cyfluthrin, Deltamethrin, Lambda cyhalothrin, Etoxazole and Cyproconazole, residues were lower than the limit of quantitation (LOQ) of the analytical method just after the treatment, according to their low doses of employment.