Design and laboratory testing of a new flow-through directional passive air sampler for ambient particulate matter

A new type of directional passive air sampler (DPAS) is described for collecting particulate matter (PM) in ambient air. The prototype sampler has a non-rotating circular sampling tray that is divided into covered angular channels, whose ends are open to winds from sectors covering the surrounding 360°. Wind-blown PM from different directions enters relevant wind-facing channels, and is retained there in collecting pools containing various sampling media. Information on source direction and type can be obtained by examining the distribution of PM between channels. Wind tunnel tests show that external wind velocities are at least halved over an extended area of the collecting pools, encouraging PM to settle from the air stream. Internal and external wind velocities are well-correlated over an external velocity range of 2.0-10.0 m s?1, which suggests it may be possible to relate collected amounts of PM simply to ambient concentrations and wind velocities. Measurements of internal wind velocities in different channels show that velocities decrease from the upwind channel round to the downwind channel, so that the sampler effectively resolves wind directions. Computational fluid dynamics (CFD) analyses were performed on a computer-generated model of the sampler for a range of external wind velocities; the results of these analyses were consistent with those from the wind tunnel. Further wind tunnel tests were undertaken using different artificial particulates in order to assess the collection performance of the sampler in practice. These tests confirmed that the sampler can resolve the directions of sources, by collecting particulates preferentially in source-facing channels.     

Haloacetic acids in swimming pool and spa water in the United States and China

The objective of this study is to investigate the occurrence of haloacetic acids （HAAs）, a group of disinfection byproducts, in swimming pool and spa water. The samples were collected from six indoor pools, six outdoor pools and three spas in Pennsylvania, the United States, and from five outdoor pools and nine indoor pools in Beijing, China. Five HAAs （HAA5）, including monochloroacetic acid, dichloroacetic acid, trichloroacetic acid, monobromoacetic acid, and dibromoacetic acid were analyzed. Total chlorine, pH and total organic carbon concentration were analyzed as well. Results indicated that the levels of HAA5 in swimming pools and spas in the United States ranged from 70 to 3980μg·L^-1, with an arithmetic average at 1440μg·L^-1 and a median level at 1150μg·L^-1. These levels are much higher than the levels reported in chlorinated drinking water and are likely due to organic matters released from swimmers＇ bodies. The levels of HAA5 in swimming pools in China ranged from 13 to 332μg·L^-1, with an arithmetic average at 117μg·L^-1 and a median level at 114μg·L^-1. The lower HAA levels in swimming pools in China were due to the lower chlorine residuals. Results from this study can help water professionals to better understand the formation and stability of HAAs in chlorinated water and assess risks associated with exposures to HAAs in swimming pools and spas.     

A Three-Dimensional Water Quality Model of Chicago Area Waterway System (CAWS)

As outfalls from various water reclamation plants, pumping stations, and combined sewer overflow outfalls discharge into the Chicago Area Waterway System (CAWS), an enhanced understanding of the final fate of crucial water quality state variables is of utmost importance. This paper reports the development and application of a 3D water quality model for a modified CAWS combined with the hydrodynamic kernel of Environmental Fluid Dynamics Code (EFDC). The modified CAWS is used to demonstrate the usefulness of the model while eliminating complications beyond the scope of this initial effort. The water quality model developed and presented in this research is a simplistic dissolved oxygen (DO)—biochemical oxygen demand model with the facility to account for the interaction between the water column and the bed. The aforementioned model is applied for the month of May 2009. The results from the hydrodynamic (EFDC) and water quality model is validated with the help of the observed data obtained from United States Geological Survey gaging stations and Metropolitan Water Reclamation District of Greater Chicago monitoring stations present inside the modeled domain. The 3D modeling captured the hydrodynamic and water-quality processes in CAWS in a satisfactory manner. Furthermore, modeling results showed and proved the interdependence of water quality characteristics in Bubbly Creek and CAWS with the effluent concentration from Racine Avenue Pumping Station situated at the head of Bubbly Creek, South Fork of South Branch of Chicago River.     

Three-dimensional hydrodynamic modeling of the Chicago River, Illinois

We present and describe results from a three-dimensional model applied to the Chicago River under a wet weather condition. Chicago River is an integral part of Chicago, the third largest city in United States, for recreational, commercial and industrial purposes. Although the flow in the Chicago River is supposed to be from north to south, the flow acquires a three-dimensional nature at various points in the river. The reasons for the three dimensionality of the flow can be attributed to the dynamic boundary conditions generated by combined sewer overflow (CSO) events during wet weather conditions, as well as the presence of confluences of various branches of the river with creeks and slips. This work presents the hydrodynamic application and validation of a three dimensional numerical model, which was used to simulate the flow in the Chicago River for a period of 8?days in September of 2008, during which the torrential rains in the city of Chicago led to intense CSO events. The numerical model used for the aforementioned exercise is the Environmental Fluid Dynamics Code (EFDC) which solves the three dimensional vertically hydrostatic, free surface, turbulence averaged equations of motions for a variable density fluid. The results obtained by the numerical model were validated with the help of stage values obtained from the USGS gauging station [Station No. 05536123] present inside the domain of interest. It was estimated that during the storm September 2008, several billion gallons of water were discharged into Lake Michigan from the Chicago River Controlling Works to prevent city flooding. The 3D model also provides a tool for the management of the waterways, in particular for future analysis of different alternatives being considered to reverse the Chicago River once again with the goal of preventing the passage of invasive species (e.g. Asian carp) towards the Great Lakes.     

Effects of three pesticides on the avoidance behavior of earthworms in laboratory tests performed under temperate and tropical conditions

Little research has been performed on the impact of pesticides on earthworms under tropical conditions. Taking into consideration the often-limited resources in tropical countries, simple screening tests are needed. Therefore, it was investigated whether three pesticides relevant for the Brazilian Amazon (benomyl, carbendazim, lambda-cyhalothrin) affect the avoidance behavior of the earthworm Eisenia fetida. The tests were performed for two days according to ISO guideline 17512 but were adapted to tropical conditions (i.e. test substrate, test organism and temperature). The results indicate that this test gives reproducible and reliable results. Toxicity values (NOEC, EC50) are lower than those determined in 14 day-acute mortality tests and are approximately in the same range such as those found in 56 day-chronic reproduction tests with the same earthworm species, which were performed in parallel. Therefore, the use of the earthworm avoidance tests is recommended as a screening tool for the risk assessment of pesticides.     

DNA damage in oral epithelial cells of individuals chronically exposed to indoor radon (<Superscript>222</Superscript>Rn) in a hydrothermal area

Hydrothermal areas are potentially hazardous to humans as volcanic gases such as radon (²²²Rn) are continuously released from soil diffuse degassing. Exposure to radon is estimated to be the second leading cause of lung cancer, but little is known about radon health-associated risks in hydrothermal regions. This cross-sectional study was designed to evaluate the DNA damage in the buccal epithelial cells of individuals chronically exposed to indoor radon in a volcanic area (Furnas volcano, Azores, Portugal) with a hydrothermal system. Buccal epithelial cells were collected from 33 individuals inhabiting the hydrothermal area (Ribeira Quente village) and from 49 individuals inhabiting a non-hydrothermal area (Ponta Delgada city). Indoor radon was measured with Ramon 2.2 detectors. Chromosome damage was measured by micronucleus cytome assay, and RAPD-PCR was used as a complementary tool to evaluate DNA damage, using three 10-mer primers (D11, F1 and F12). Indoor radon concentration correlated positively with the frequency of micronucleated cells (r _s = 0.325, p = 0.003). Exposure to radon is a risk factor for the occurrence micronucleated cells in the inhabitants of the hydrothermal area (RR = 1.71; 95% CI, 1.2–2.4; p = 0.003). One RAPD-PCR primer (F12) produced differences in the banding pattern, a fact that can indicate its potential for detecting radon-induced specific genomic alterations. The observed association between chronic exposure to indoor radon and the occurrence of chromosome damage in human oral epithelial cells evidences the usefulness of biological surveillance to assess mutations involved in pre-carcinogenesis in hydrothermal areas, reinforcing the need for further studies with human populations living in these areas.     

Effects of bed materials on the performance of an anaerobic sequencing batch biofilm reactor treating domestic sewage

The objective of this study was to determine the best performance of an anaerobic sequencing batch biofilm reactor (AnSBBR) based on the use of four different bed materials as support for biomass immobilization. The bed materials utilized were polyurethane foam (PU), vegetal carbon (VC), synthetic pumice (SP), and recycled low-density polyethylene (PE). The AnSBBR, with a total volume of 7.2L, was operated in 8-h batch cycles over 10 months, and fed with domestic sewage with an average influent chemical oxygen demand (COD) of 358+/-110mg/L. The average effluent COD values were 121+/-31, 208+/-54, 233+/-52, and 227+/-51mg/L, for PU, VC, SP, and PE, respectively. A modified first-order kinetic model was adjusted to temporal profiles of COD during a batch cycle, and the apparent kinetic constants were 0.52+/-0.05, 0.37+/-0.05, 0.80+/-0.04, and 0.30+/-0.02h(-1) for PU, VC, SP, and PE, respectively. Specific substrate utilization rates of 1.08, 0.11, and 0.86mg COD/mgVS day were obtained for PU, VC, and PE, respectively. Although SP yielded the highest kinetic coefficient, PU was considered the best support, since SP presented loss of chemical constituents during the reactor's operational phase. In addition, findings on the microbial community were associated with the reactor's performance data. Although PE did not show a satisfactory performance, an interesting microbial diversity was found on its surface. Based on the morphology and denaturing gradient gel electrophoresis (DGGE) results, PE showed the best capacity for promoting the attachment of methanogenic organisms, and is therefore a material that merits further analysis. PU was considered the most suitable material showing the best performance in terms of efficiency of solids and COD removal.     

Somatic Coliphage Profiles of Produce and Environmental Samples from Farms in Northern México

Somatic coliphages were quantified in 459 produce and environmental samples from 11 farms in Northern Mexico to compare amounts of somatic coliphages among different types of fresh produce and environmental samples across the production steps on farms. Rinsates from cantaloupe melons, jalapeño peppers, tomatoes, and the hands of workers, soil, and water were collected during 2011–2012 at four successive steps on each farm, from the field before harvest through the packing facility, and assayed by FastPhage MPN Quanti-tray method. Cantaloupe farm samples contained more coliphages than jalapeño or tomato (p range <0.01–0.03). Across production steps, jalapeños had higher coliphage percentages before harvest than during packing (p = 0.03), while tomatoes had higher coliphage concentrations at packing than all preceding production steps (p range <0.01–0.02). These findings support the use of targeted produce-specific interventions at multiple points in the process of growing and packing produce to reduce the risk of enteric virus contamination and improve food safety during fruit and vegetable production.     

Ecological restoration as a strategy for mitigating and adapting to climate change: lessons and challenges from Brazil

Climate change is a global phenomenon that affects biophysical systems and human well-being. The Paris Agreement of the United Nations Framework Convention on Climate Change entered into force in 2016 with the objective of strengthening the global response to climate change by keeping global temperature rise this century well below 2 °C above pre-industrial levels and to pursue efforts to limit the temperature increase even further to 1.5 °C. The agreement requires all Parties to submit their “nationally determined contributions” (NDCs) and to strengthen these efforts in the years ahead. Reducing carbon emissions from deforestation and forest degradation is an important strategy for mitigating climate change, particularly in developing countries with large forests. Extensive tropical forest loss and degradation have increased awareness at the international level of the need to undertake large-scale ecological restoration, highlighting the need to identify cases in which restoration strategies can contribute to mitigation and adaptation. Here we consider Brazil as a case study to evaluate the benefits and challenges of implementing large-scale restoration programs in developing countries. The Brazilian NDC included the target of restoring and reforesting 12 million hectares of forests for multiple uses by 2030. Restoration of native vegetation is one of the foundations of sustainable rural development in Brazil and should consider multiple purposes, from biodiversity and ecosystem services conservation to social and economic development. However, ecological restoration still presents substantial challenges for tropical and mega-diverse countries, including the need to develop plans that are technically and financially feasible, as well as public policies and monitoring instruments that can assess effectiveness. The planning, execution, and monitoring of restoration efforts strongly depend on the context and the diagnosis of the area with respect to reference ecosystems (e.g., forests, savannas, grasslands, wetlands). In addition, poor integration of climate change policies at the national and subnational levels and with other sectorial policies constrains the large-scale implementation of restoration programs. The case of Brazil shows that slowing deforestation is possible; however, this analysis highlights the need for increased national commitment and international support for actions that require large-scale transformations of the forest sector regarding ecosystem restoration efforts. Scaling up the ambitions and actions of the Paris Agreement implies the need for a global framework that recognizes landscape restoration as a cost-effective nature-based solution and that supports countries in addressing their remaining needs, challenges, and barriers.