Biogas from poultry waste—production and energy potential

The objective of this study was to evaluate the effect of heat treatment on poultry litter with different levels of reutilisation for potential generation of biogas in experimental biodigesters. Chicken litter used was obtained from two small-scale poultry houses where 14 birds m^?2 were housed for a period of 42 days per cycle. Litter from aviary 1 received no heat treatment while each batch of litter produced from aviary 2 underwent a fermentation process. For each batch taken, two biodigesters were set for each aviary, with hydraulic retention time of 35 days. The efficiency of the biodigestion process was evaluated by biogas production in relation to total solids (TS) added, as well as the potential for power generation. Quantified volumes ranged from 8.9 to 41.1 L of biogas for aviary 1, and 6.7 to 33.9 L of biogas for aviary 2, with the sixth bed reused from both aviaries registering the largest biogas potential. Average potential biogas in m³ kg^?1 of TS added were 0.022 to 0.034 for aviary 1 and 0.015 to 0.022 for aviary 2. Energy values ??of biogas produced were calculated based on calorific value and ranged from 0.06 to 0.33 kWh for chicken litter without fermentation and from 0.05 to 0.27 kWh for chicken litter with fermentation. It was concluded that the re-use of poultry litter resulted in an increase in biogas production, and the use of fermentation in the microbiological treatment of poultry litter seems to have negatively influenced production of biogas.     

The use of a natural coagulant (Opuntia ficus-indica) in the removal for organic materials of textile effluents

The goal of this study was to investigate the activity of the coagulant extracted from the cactus Opuntia ficus-indica (OFI) in the process of coagulation/flocculation of textile effluents. Preliminary tests of a kaolinite suspension achieved maximum turbidity removal of 95 % using an NaCl extraction solution. Optimization assays were conducted with actual effluents using the response surface methodology (RSM) based on the Box–Behnken experimental design. The responses of the variables FeCl₃, dosage, cactus dosage, and pH in the removal of COD and turbidity from both effluents were investigated. The optimum conditions determined for jeans washing laundry effluent were the following: FeCl₃ 160 mg L^?1, cactus dosage 2.60 mg L^?1, and pH 5.0. For the fabric dyeing effluent, the optimum conditions were the following: FeCl₃ 640 mg L^?1, cactus dosage 160 mg L^?1, and pH 6.0. Investigation of the effects of the storage time and temperature of the cactus O. ficus-indica showed that coagulation efficiency was not significantly affected for storage at room temperature for up to 4 days.     

Potential of Hemidesmus indicus for phytoextraction of lead from industrially contaminated soils

Many sites in the industrial region of Kattedan near Hyderabad, Andhra Pradesh (AP), India are contaminated with high concentrations of lead. The use of plants to remove toxic metals from soils (phytoremediation) is emerging as a potential strategy for cost-effective and environmentally sound remediation of contaminated soils. We studied remediation of soils contaminated with lead using a lead hyperaccumulating plant, Hemidesmus indicus. The ability of this plant to accumulate lead in shoots and roots was studied with pot experiments. The results showed that accumulation was maximum in roots for the first 1-3 weeks and later for a contact period of three months, the accumulation rate was maximum in shoots. In addition we used various chelating agents such as EDTA, HEDTA, DTPA and CDTA to determine the best chemical modifier for efficient lead removal from contaminated soils. The effect on lead accumulation of plant in the presence of various metal co-ions was also studied. An attempt was made for the decontamination of lead from five different "Real-life" soils of Kattedan using H. indicus.     

Diel variations in photoinduced oxidation of Hg0 in freshwater

Experiments have been conducted to determine diel variations in photoinduced Hg0 oxidation in lake water under natural Hg0(aq) concentrations. Pseudo-first-order rates of photooxidation (k') were calculated for water freshly collected in a Canadian Shield lake, Lake Croche (45 degrees 56' N, 74 degrees 00' W), at different periods of the day and subsequently incubated in the dark. Hg0 oxidation rates ranged from 0.02 to 0.07 h(-1), increasing from sunrise to noon and then decreasing throughout the remainder of the day. These changes paralleled those in sunlight intensity integrated over 1 h preceding water collection, and suggested that the water freshly collected in daylight was rich in photochemically produced Hg0 oxidants. It was also estimated that under intense solar radiation, even if oxidation rates reached a peak, reduction of Hg(II) was the prevalent redox process. Inversely, Hg0 oxidation overcame DGM production during the night or at periods of weaker light intensity. Overall, these findings explain the decreases in the DGM pool generally observed overnight. They also support previous reports that, during summer days, volatilization of Hg0 from water represent an important step in the Hg cycle in freshwater systems.     

Evaluation of the susceptibility of the cultured shrimp Litopenaeus vannamei to vibriosis when orally exposed to the insecticide methyl parathion

The causes of disease in cultured shrimp are difficult to ascertain but there is evidence that disease is correlated with environmental factors. Crustaceans are particularly sensitive to insecticides due to their close phylogenetic relationship with insects. The objective of this study was to investigate whether there was an increased susceptibility of the shrimp Litopenaeus vannamei to Vibrio parahaemolyticus, when exposed to methyl parathion. The outline of the study was the following: An LC50 96 h was determined to methyl parathion orally offered to juvenile shrimp. Further experiments were carried out in order to determine a concentration that affected the shrimp (verified by measuring the acethylcholinesterase activity) while producing minimal mortalities. This sublethal concentration was used in a susceptibility experiment where methyl parathion was offered to shrimp which were later injected with V. parahaemolyticus in a dose expected to kill less than 15%. Probit analysis estimated a 96 h median lethal concentration (LC50) of 1.56 microg g(-1). Mortality and AChE activity showed a concentration-response relationship in the exposure treatments. The median inhibitory concentration (IC50) determined was 0.029 microg g(-1). These results suggested that a concentration of 0.1 microg g(-1) was appropriate for the bacteria-pesticide interaction test as it was able to elicit 11.1% mortality after 10 days of exposure, while producing an AChE inhibition of 57.12%. Cumulative mortalities were significantly increased (P<0.01) in the treatment that combined exposure to methyl parathion and V. parahaemolyticus (35.19%) in comparison with methyl parathion or V. parahaemolyticus alone (9.26% and 7.41%, respectively).     

Allelopathic potential of Cistus ladanifer chemicals in response to variations of light and temperature

Summary. Earlier studies have demonstrated the allelopathic potential of the exudate of Cistus ladanifer leaves, and have identified the compounds responsible for the effect. It is here shown that the effect of each of these compounds and their interactions on germination and seedling development varies depending on the light and temperature parameters to which they are subjected. The allelochemicals show a fairly heterogeneous response when studied separately, there being no general pattern to the behaviour. When they act conjointly, however, their activity is enhanced by high temperatures, and the greatest phytotoxicity in inhibiting both germination and seedling development is attained with high temperatures and long photoperiods. These results suggest that the environmental factors temperature and photoperiod may alter the allelopathic effect of Cistus ladanifer. Received 5 December 2001; accepted 11 March 2002.     

Valorization of EVA waste from footwear industry as natural aggregates substitutes in mortar: the effect of granulometry

Journal of Material Cycles and Waste Management - The increased consumption of polymers and the consequent generation of waste requires the development of efficient recycling strategies. In this...     

Performance of mortars with PET

Journal of Material Cycles and Waste Management - The massive amount of plastic production inevitably leads to huge levels of pollution and, consequently, is threatening the environment and...     

Modelling pesticide volatilization after soil application using the mechanistic model Volt'Air

Volatilization of pesticides participates in atmospheric contamination and affects environmental ecosystems including human welfare. Modelling at relevant time and spatial scales is needed to better understand the complex processes involved in pesticide volatilization. Volt'Air-Pesticides has been developed following a two-step procedure to study pesticide volatilization at the field scale and at a quarter time step. Firstly, Volt'Air-NH₃ was adapted by extending the initial transfer of solutes to pesticides and by adding specific calculations for physico-chemical equilibriums as well as for the degradation of pesticides in soil. Secondly, the model was evaluated in terms of 3 pesticides applied on bare soil (atrazine, alachlor, and trifluralin) which display a wide range of volatilization rates. A sensitivity analysis confirmed the relevance of tuning to K_h. Then, using Volt'Air-Pesticides, environmental conditions and emission fluxes of the pesticides were compared to fluxes measured under 2 environmental conditions. The model fairly well described water temporal dynamics, soil surface temperature, and energy budget. Overall, Volt'Air-Pesticides estimates of the order of magnitude of the volatilization flux of all three compounds were in good agreement with the field measurements. The model also satisfactorily simulated the decrease in the volatilization rate of the three pesticides during night-time as well as the decrease in the soil surface residue of trifluralin before and after incorporation. However, the timing of the maximum flux rate during the day was not correctly described, thought to be linked to an increased adsorption under dry soil conditions. Thanks to Volt'Air's capacity to deal with pedo-climatic conditions, several existing parameterizations describing adsorption as a function of soil water content could be tested. However, this point requires further investigation. Practically speaking, Volt'Air-Pesticides can be a useful tool to make decision about agricultural practices such as incorporation or for the estimation of overall pesticide volatilization rates, and it holds promise for time specific dynamics.     

Moving a hospital: simulation – a way to co-produce safety healthcare facilities

Moving a hospital is a critical period for quality and safety of healthcare. Change is very stressful for professionals. Workers who have experienced relocation of their place of work report deterioration in health status. Building a new hospital or restructuring a unit could provide an opportunity for improving safety and value in healthcare and for ensuring better quality of worklife for the staff. We used in situ simulation to promote experiential learning by training healthcare workers in the workplace in which they are expected to use their skills. In situ simulation was a way to design, plan, assess and implement a new healthcare environment before opening its doors for patient care. We can envisage that simulation will soon be used formally to identify potential problems in healthcare delivery and in staff quality of worklife in new healthcare facilities. Simulation is a way to co-produce a safe and valuable healthcare facility.