Electrochemical oxidation of azo dyes in water: a review

Environmental Chemistry Letters - Pollution of waters by azo dyes is a major global issue because some azo dyes have carcinogenic and mutagenic effects. Therefore, advanced methods are required to...     

Fast and complete removal of the 5-fluorouracil drug from water by electro-Fenton oxidation

Cytostatic drugs are a troublesome class of emerging pollutants in water owing to their potential effects on DNA. Here we studied the removal of 5-fluorouracil from water using the electro-Fenton process. Galvanostatic electrolyses were performed with an undivided laboratory-scale cell equipped with a boron-doped diamond anode and a carbon felt cathode. Results show that the fastest degradation and almost complete mineralization was obtained at a Fe²⁺ catalyst concentration of 0.2 mM. The absolute rate constant for oxidation of 5-fluorouracil by hydroxyl radicals was 1.52 × 10⁹ M^?1 s^?1. Oxalic and acetic acids were initially formed as main short-chain aliphatic by-products, then were completely degraded. After 6 h the final solution mainly contained inorganic ions (NH₄ ⁺, NO₃ ^? and F^?) and less than 10% of residual organic carbon. Hence, electro-Fenton constitutes an interesting alternative to degrade biorefractory drugs.     

Soil properties and root biomass responses to prescribed burning in young Corsican pine (Pinus nigra Arn.) stands

Fire is an important tool in the management of forest ecosystems. Although both prescribed and wildland fires are common in Turkey, few studies have addressed the influence of such disturbances on soil properties and root biomass dynamics. In this study, soil properties and root biomass responses to prescribed fire were investigated in 25-year-old corsican pine (Pinus nigra Arn.) stands in Kastamonu, Turkey. The stands were established by planting and were subjected to prescribed burning in July 2003. Soil respiration rates were determined every two months using soda-lime method over a two-year period. Fine (0-2 mm diameter) and small root (2-5 mm diameter) biomass were sampled approximately bimonthly using sequential coring method. Mean daily soil respiration ranged from 0.65 to 2.19 g Cm(-2) d(-1) among all sites. Soil respiration rates were significantly higher in burned sites than in controls. Soil respiration rates were correlated significantly with soil moisture and soil temperature. Fine root biomass was significantly lower in burned sites than in control sites. Mean fine root biomass values were 4940 kg ha(-1) for burned and 5450 kg ha(-1) for control sites. Soil pH was significantly higher in burned sites than in control sites in 15-35 cm soil depth. Soil organic matter content did not differ significantly between control and burned sites. Our results indicate that, depending on site conditions, fire could be used successfully as a tool in the management of forest stands in the study area.     

Performance improvement potential of sensor embedded products in environmental supply chains

Environmental supply chain is a desirable alternative to traditional supply chain due to new and stricter environmental regulations by local governments and increasing consumer awareness towards environmental issues. The two most common types of environmental supply chains are reverse supply chains and closed-loop supply chains. In reverse or closed-loop supply chains, collected used products are subjected to one of four recovery options, viz., reuse, recycling, remanufacturing or disposal. Regardless of the chosen recovery option, all products are disassembled up to some level. However, there is a high level of uncertainty associated with the disassembly yield due to non-functional and/or missing components. Sensor embedded products (SEPs) is a viable approach to cope with this uncertainty since they involve sensors which can detect non-functional and/or missing components prior to disassembly. This study presents a quantitative assessment of the impact of SEPs on the various performance measures of a kanban-controlled disassembly line. First, separate design of experiments studies based on Orthogonal Arrays are carried out for conventional products and SEPs. Then, the results of paired t-tests comparing the two cases based on different performance measures are presented.     

The seasonal distribution of heavy metals in Mussel sample from Yalova in the Marmara Sea, 2008�C2009

Concentration of the some heavy metals (Co, Cu, Fe, Ni, Pb and Zn) Mediterranean mussel Mytilus galloprovincialis from Yalova (Marmara Sea) were investigated seasonally. The mean concentrations of Co, Cu, Fe, Ni, Pb and Zn in the soft tissues were 4.08 ± 0.67, 5.54 ± 0.59, 156.72 ± 20.18, 3.71 ± 1.14, 2.92 ± 0.51 and 106.23 ± 5.66 mg kg(?-1) dry weights, respectively. There were no significant differences between the metal concentrations among the seasons (P > 0.05). The mean Pb and Zn concentrations were higher than the acceptable limit proposed by International Turkish standards.     

Environmental and social impacts of the increasing number of geothermal power plants (Büyük Menderes Graben—Turkey)

Environmental Science and Pollution Research - The use of renewable energy is critical to the long-term development of global energy. Geothermal power plants (GPPs) differ in the technology they...     

An empirical note on tourism and sustainable development nexus

Environmental Science and Pollution Research - The goal of this research is to investigate the impact of tourism on sustainable development in the 10 most visited countries. For this purpose,...     

Single-source impact analysis using three-dimensional air quality models

Isolating the effects of an individual emissions source on secondary air pollutants such as ozone and some components of particulate matter must incorporate complex nonlinear processes, be sensitive to small emissions perturbations, and account for impacts that may occur hundreds of kilometers away. The ability to evaluate these impacts is becoming increasingly important for efficient air quality management. Here, as part of a recent compliance enforcement action for a violation of the Clean Air Act and as an evaluation of ozone response to single-source emissions plumes, two three-dimensional regional photochemical air quality models are used to assess the impact on ozone from approximately 2000 to 3000 excess t/month of nitrogen oxides emitted from a single power plant in Ohio. Periods in May, July, and August are evaluated. Two sensitivity methods are applied: the "brute-force" (B-F) method and the decoupled direct method (DDM). Using DDM, maximum 1-hr averaged ozone concentrations are found to increase by up to 1.8, 1.3, and 2.2 ppbv during May, July, and August episodes, respectively, and concentration increases greater than 0.5 ppbv occur in Ohio, Pennsylvania, Maryland, New York, West Virginia, Virginia, and North and South Carolina. B-F results for the August episode show a maximum 1-hr averaged ozone concentration increase of 2.3 ppbv. Significant localized decreases are also simulated, with a maximum of 3.6 ppbv in Ohio during the August episode and decreases of 0.50 ppbv and greater in Ohio, Pennsylvania, Maryland, West Virginia, and Virginia. Maximum increases are compared with maximum decreases for the August period using second-order DDM and are found, in aggregate, to be greater in magnitude by 42%. When evaluated during hours when ozone concentrations exceed 0.060 ppm, the maximum increases in ozone are higher than decreases by 82%. The spatial extent of ozone increase in both cases is about triple that of reduction.     

Determination of Cadmium Levels in Agricultural Areas of Çarşamba and Bafra Plains

Cadmium pollution resulted from fertilizer applications were studied by determining cadmium levels in agricultural and non-agricultural soils of Bafra and Çar?amba plains. Soil samples of 68 were collected from agricultural (34) and non-agricultural (34) areas. The sample of 2 g was placed in a test tube and digested with hydrochloric acid and nitric acid mixture (3:1, v/v) in an aluminum block. Taking up the evaporated residue was dissolved in 1% nitric acid and total cadmium concentrations were determined with GF-AAS. Mean level of cadmium contents were found in agricultural areas 0.162?±?0.078 for Çar?amba and 0.433?±?0.288 mg kg^?1 for Bafra. The accuracy of the method was tested with determining cadmium contents of standard reference material and cadmium spiked soil samples.     

Degradation of PVC Containing Mixtures in the Presence of HCl Fixators

Degradation of a model polymer mixture (PVC/PS/PE) and a waste polymer mixture in the presence of HCl fixators (Red Mud, precipitated CaCO₃ and dolamite) was studied using thermal gravimetric analysis (TGA) and a cycled-spheres-reactor. The experiments in cycled-spheres reactor model were performed by stepwise pyrolysis. Liquid products and HCl from each step were collected separately. For the model polymer mixture, the precipitated CaCO₃ showed the best effect on the fixation of evolved HCl and the reduction of chlorine content in the liquid products whereas RM yielded the best result for the waste polymer mixture. In addition, using HCl fixator also affected the degradation of both types of polymer mixture, leading to the formation of more gaseous and less residue.