Amoxicillin effects on functional microbial community and spread of antibiotic resistance genes in amoxicillin manufacture wastewater treatment system

This study aimed to reveal how amoxicillin(AMX) affected the microbial community and the spread mechanism of antibiotic resistance genes(ARGs) in the AMX manufacture wastewater treatment system. For this purpose, a 1.47 L expanded granular sludge bed(EGSB) reactor was designed and run for 241 days treating artificial AMX manufacture wastewater. 454 pyrosequencing was applied to analyze functional microorganisms in the system. The antibiotic genes OXA_(-1), OXA_(-2), OXA_(-10), TEM_(-1), CTX-M_(-1), class I integrons(intI1) and 16 SrRNA genes were also examined in sludge samples. The results showed that the genera Ignavibacterium, Phocoenobacter,Spirochaeta, Aminobacterium and Cloacibacillus contributed to the degradation of different organic compounds(such as various sugars and amines). And the relative quantification of eachβ-lactam resistance gene in the study was changed with the increasing of AMX concentration.Furthermore the vertical gene transfer was the main driver for the spread of ARGs rather than horizontal transfer pathways in the system.     

Determination of 15 phthalate esters in air by gas-phase and particle-phase simultaneous sampling

Based on previous research, the sampling and analysis methods for phthalate esters (PAEs) were improved by increasing the sampling flow of indoor air from 1 to 4 L/min, shortening the sampling duration from 8 to 2 hr. Meanwhile, through the optimization of chromatographic conditions, the concentrations of 9 additional PAE pollutants in indoor air were measured. The optimized chromatographic conditions required a similar amount of time for analysis as before, but gave high responsivity, the capability of simultaneously distinguishing 15 kinds of PAEs, and a high level of discrimination between individual sample peaks, as well as stable peak generation. The recovery rate of all gas-phase and particle-phase samples of the 15 kinds of PAEs ranged from 91.26% to 109.42%, meeting the quantitative analysis requirements for indoor and outdoor air sampling and analysis. For the first time, investigation of the concentration levels as well as characteristics of 15 kinds of PAEs in the indoor air from four different traffic micro-environments (private vehicles, busses, taxis and subways) was carried out, along with validation of the optimized sampling and analytical method. The results show that all the 9 additional PAEs could be detected at relatively high pollution levels in the indoor air from the four traffic micro-environments. As none of the pollution levels of the 15 kinds of PAEs in the indoor air from the 4 traffic micro-environments should be neglected, it is of great significance to increase the types of PAEs able to be detected in indoor air.     

关于渗透通风条件建筑结构对室内PM2.5浓度水平影响评价模型探讨

我国京津冀地区近年频遭大气PM_2.5污染侵扰,相关研究表明,既使关闭建筑外窗,大气中PM_2.5仍可以通过渗透通风方式进入室内污染环境.为定量评价建筑渗透通风及无室内污染源条件下建筑结构（如外窗缝隙结构、房间建筑结构等）对室内ρ（PM_2.5）的影响规律,基于北京市东城区、朝阳区6个不同建筑结构的房间室内外ρ（PM_2.5）实时监测数据,重点比较分析了建筑结构对室内外ρ（PM_2.5）关联特性的影响规律.此外,根据颗粒物穿透特性及沉降特性机理,提出了反映建筑外窗缝隙结构（如缝高、缝深）的无量纲特征参数A_P与反映房间建筑结构（如层高、开间、进深）的无量纲特征参数A_k.在前期提出的室内ρ（PM_2.5）预测模型基础上,进一步构建了二者（A_P与A_k）对室内ρ（PM_2.5）影响的评价模型,并通过实测数据验证了模型的正确性.结果表明:当室外PM_2.5污染程度与气象条件一定时,建筑结构对I/O[室内外ρ（PM_2.5）之比]影响较大,其范围在0.4~0.7之间;随着建筑外窗气密性等级的提高,对应室内ρ（PM_2.5）呈显著的下降趋势.建筑外窗缝隙结构对室内ρ（PM_2.5）影响程度远大于房间建筑结构,敏感性分析结果表明,当建筑外窗缝高每降低50%或缝深每提高50%,对应室内ρ（PM_2.5）约可下降33.6%与31.9%.研究显示,气密性等级较高的建筑外窗缝隙缝高往往较小、缝深较长,渗透通风条件下对控制室内ρ（PM_2.5）水平作用更显著。      

恶臭污染排放源指纹谱编制及初步应用

为了识别恶臭污染源排放特征以及了解不同行业恶臭物质排放差异,对恶臭污染排放源指纹谱指标物质进行了筛选,并依据筛选结果对6家典型恶臭排放企业进行样品采集及分析,绘制了各家企业的指纹谱图.结果表明:①通过物质嗅觉阈值与AMGE（ambient multimedia environmental goals,周围环境目标值）和RfC（reference concentration,健康风险参考浓度）对比以及结合国内外恶臭标准受控物质和现有的标准检测方法,最终确定了包括三甲胺、硫化氢、甲硫醇等典型恶臭物质在内的19种物质作为指纹谱指标物质.②依据我国现行的标准监测分析方法对19种恶臭指标物进行检测,初步得到了各家企业的恶臭物质指纹谱数据,绘制了各家企业的指纹谱图.③指纹谱成分分析结果显示,污水处理厂主要的恶臭物质是硫化氢,ρ（硫化氢）为44.566 mg/m3;涂料企业ρ（甲基乙基酮）、ρ（丁醛）和ρ（乙酸乙酯）较高,分别为39.037、28.757、27.840 mg/m3;制药企业ρ（丙醛）较高,为4.791 mg/m3;汽车和家具制造企业ρ（二甲苯）较高,分别为15.209和2.081 mg/m3.④应用分歧系数法分析不同企业指纹谱之间的相似程度,分析结果显示,分歧系数在0.331~0.809之间,不同企业之间指纹谱存在较大差异.研究显示,建立恶臭污染排放源指纹谱可进行恶臭源排放特征识别,为恶臭污染溯源提供基础数据和科学依据.      

LNG储罐安全阀泄漏分析与故障排查

针对16×10~4m~3LNG储罐安全阀泄漏问题,从阀门结构角度对泄漏原因进行了详细的分析,认为主要有三种可能:(1)导阀失效;(2)上阀腔漏气;(3)阀座密封不严。根据分析结论,提出了故障排查的方法以及操作步骤;结合阀门解体检查情况,建立了阀门失效的故障树,从投产、阀门运行维护角度提出了相关建议。     

大气中重金属污染现状及来源研究

总结了近年来的研究成果,通过文献调研对中国大气中重金属污染现状、大气中重金属来源和重金属在环境中的迁移转化途径进行综述,提出为缓解重金属污染的高发态势,保护人群健康,应建立完善的环境污染防治体系,强化大气污染源颗粒物控制来减少重金属在大气环境中的暴露浓度,切断重金属在环境中的污染途径以减少大气传输和沉降,降低由大气-土壤-动植物-人体的重金属暴露健康风险.     

太湖流域污水处理厂低温生物脱氮运行模式研究

以苏州工业园区第二污水厂在冬季低温下的实际运行为例,重点分析了低温生物脱氮的影响因子,并探讨影响低温生物脱氮的因素.根据污水处理厂冬季水温特征和低温脱氮影响规律,结合污水厂运行经验和数据分析提出太湖流域污水厂低温生物脱氮的适合措施,以达到低温下保证运行效果使出水达标,并结合冬季低温下太湖流域污水厂的特点,为保证总氮出水达标提出来了相应的解决方案和措施.     

后处理设施给水系统可靠性的GO法研究

后处理设施给水系统是后处理设施重要的公用系统,对后处理设施的稳定、安全运行至关重要.给水系统的可靠性需要深入分析,应用GO法进行了研究.获得了给水系统的平均故障概率、最小割集、重要度等可靠性指标.结果表明,给水系统的可靠性比较高,符合单一故障准则,二阶最小割集对系统故障的贡献最大,应该采取措施予以消除.进一步深入对比分析GO法与故障树法,结果显示,对于给水系统的可靠性分析,GO法有建模容易且图形简洁的优点.     

黑龙江及周边中强震前不同参数模型矩加速释放(AMR)现象特征分析

应用时间破裂分析方程中表征地震距释放程度的m值,选取不同空间尺度进行时空扫描研究,得到震前1年以每2个月为时间间隔的空间m值随时间变化的分布图像,运用不同参数设置计算了地震前Benioff累积应变释放特征。通过对比这些变化找出研究区内m值空间分布搜索主震破裂点扫描效果较好的参数模型,尝试性地给出了"矩释放程度空间扫描"方法应用于地震预测的经验指标。并结合与矩加速释放具有相同物理机制的加卸载响应比(Load/Unload Response Ratio)方法进行综合分析,利用这两种方法对地震进行中短期预测,达到两种方法互相检验、相互辅助的目的。考虑到本文仅对6个震例进行研究,无法给出具有统计显著性的结论,所以仍需结合其他方法进行点、线、面的综合分析。     

聚磷污泥去除高浓度铅的影响因素研究

利用聚磷活性污泥去除废水中的铅[ρ(Pb2+)=150.0 mg·L-1],研究了反应体系内不同溶解氧状况和初始pH值对污泥除铅的效率和稳定性的影响.结果表明,厌氧条件下,pH 6时,铅的去除率随时间增长呈上升趋势,32 d后铅去除率达99.8%,其中有机物及硫化物结合态铅、残渣态分别占41.8%和52.6%,污泥中铅的稳定性良好.好氧条件下,在相对较短时间内铅的去除率随pH上升而增加,反应2 h时,pH 6、pH 4和pH 2对应的铅的去除率分别为99.9%、96.9%和30.3%;而好氧32 d后pH 6、pH 4和pH 2的污泥中残渣态铅含量分别为3 072.3、4 726.8和2 359.1 mg·kg-1,分别占污泥中总铅的41.8%、65.8%和88.8%.综合考虑除铅率和除铅后污泥稳定性,好氧且pH 4理论上是聚磷污泥除铅的最佳条件.