Effects of pH, organic acids, and competitive cations on mercury desorption in soils

The effects of pH, organic acids, and competitive cations on Hg(2+) desorption were studied. Three representative soils for rice production in China, locally referred to as a yellowish red soil (YRS), purplish clayey soil (PCS), and silty loam soil (SLS) and classified as Gleyi-Stagnic Anthrosols in FAO/UNESCO nomenclature, were, respectively, collected from Jiaxin County, Deqing County, and Xiasha District of Hangzhou City, Zhejiang Province. Most of the added Hg(2+) was adsorbed at low initial concentrations (<2 mg l(-1)). Desorption of the adsorbed Hg(2+) in 0.01M KCl (simulating soil solution) was minimal, but was significantly enhanced by the change of pH, and the presence of organic acids or competitive cations. The desorption of Hg(2+) in the soils decreased with pH from 3.0 to 5.0, leveled off at pH 5.0-8.0, but increased with pH from 7.0 to 9.0. The presence of organic ligands enhanced Hg(2+) desorption in the soils except for YRS, in which the addition of tartaric, malic, or oxalic acid reduced Hg(2+) desorption at low concentrations (<10(-4)M), but Hg(2+) desorption generally increased with organic acid concentration. Citric acid was most effective in increasing Hg(2+) desorption, followed by tartaric acid and malic acid; and oxalic acid was the least effective. Desorption of adsorbed Hg(2+) increased with increasing concentrations of added Cu(2+) or Zn(2+). Applied Cu(2+) increased Hg(2+) desorption more than Zn(2+) at the same loading rate. CAPSULE: The effects of organic acids and competitive cations on Hg desorption in soil-water system are related to their concentrations, basic chemical properties, and soil properties.     

Spatial and temporal variations and possible sources of dichlorodiphenyltrichloroethane (DDT) and its metabolites in rivers in Tianjin, China

Water, suspended solid (SS) and sediment samples were collected from nine water courses in Tianjin, China and analyzed for dichlorodiphenyltrichloroethane (DDT) and its metabolites (DDXs, including o,p'-,p,p'-DDT, DDD and DDE). The average DDX concentrations in water, SS and sediment were 59+/-30 ng l(-1), 2690+/-1940 ng g(-1)dry wt. and 340+/-930 ng g(-1)dry wt., respectively. Due to the termination of the extensive agricultural application and industrial manufacture, DDXs in river sediment decreased by one order of magnitude since 1970's and low DDT fractions in these sediments were observed. Still, DDXs in the sediments near the outlets of the major manufacturers remained relatively high attributed to the historic input. DDXs in sediment were also positively correlated with organic matter content. Spatial distributions of DDXs in SS and water was different from that in sediment. For SS, a negative correlation between DDX concentration and SS content indicated a dilution effect in many rivers. Dissolved organic carbon content was the major factor affecting DDX concentrations in water phase. Wastewater discharged from dicofol manufacturers and likely illegal agricultural application were the primary reasons causing high DDT (DDE+DDD) ratios in SS and water.     

Zinc and cadmium accumulation and tolerance in populations of Sedum alfredii

To investigate the variation of Zn and Cd accumulation and tolerance of Sedum alfredii (a newly reported Zn/Cd hyperaccumulator), field surveys and hydroponic experiments were conducted among three populations of this species: two originating from old Pb/Zn mines in Zhejiang (ZJ) and Hunan (HN) Provinces and one from a "clean" site in Guangdong (GD) Province, China. Under field conditions, up to 12,524 and 12,253 mg kg(-1) Zn, and 1400 and 97 mg kg(-1) Cd in shoots of ZJ and HN plants were recorded respectively. Under hydroponic conditions, ZJ and HN plants accumulated significantly higher Zn and Cd in their leaves and stems, and possessed significantly higher Zn and Cd tolerance than GD plants. Among the two contaminated populations, ZJ plants showed higher Cd tolerance and accumulation (in leaves) than HN plants. The present results indicate that significant differences in Zn and Cd accumulation and tolerance exist in populations of S. alfredii.     

Gas chromatographic methods for monitoring of wastewater chlorophenol degradation in anaerobic reactors

Wastewater samples from an anaerobic reactor were extracted with hexane and derivatized with diazomethane (method 1) and with acetic anidride (method 2). Gas chromatography with electron-capture detection (ECD) was employed for separating the parent compound and intermediates trichlorophenols (TCP) and dichlorophenols (DCP) which originated from the penta chlorophenol (PCP) degradation process. The relations between concentrations of PCP, TCP and DCP areas were linear in the range of concentrations of 0.2 to 8 mg/L and 0.025 mg/L to 5 mg/L for methods 1 and 2, respectively. The repeatability of the extraction methods was satisfactory, with variation coefficients lower than 11%. For method 1, at the fortification level of 0.2 mg/L, recovery of PCP, TCP, and DCP was 112%, 74% and 45%, respectively. For method 2, the corresponding recovery values at the fortification level of 0.1 mg/L were 91%, 93% and 103%, respectively. Storage of the frozen samples did not alter their PCP determination properties. The chromatographic methods adapted for chlorophenol determination in wastewater were suitable with relatively simple manipulation techniques. The obtained results were reproducible and allowed identification of intermediates formed during the PCP degradation process.     

Numerical simulation of hydrogen–air detonation for damage assessment in realistic accident scenarios

An accidental hydrogen release within an equipment enclosure may result in the presence of detonable mixture in a confined environment. From a safety standpoint, it is then useful to assess the potential for damage. In that context, numerical simulation of the sequence of events subsequent to detonative ignition provides a useful tool, although with obvious limitations. This article describes the procedure, summarizes two case studies, and reviews the limitations. First, a hydrogen dispersion pattern is obtained from numerical simulation of dispersion, using a commercial package designed primarily for incompressible flow. This dispersion cloud is then used as the initial condition in an inviscid, compressible, reactive flow simulation. To force detonative ignition, a sufficiently large amount of energy is deposited in a small region that corresponds to the ignition location. Chemistry is modeled using a single step Arrhenius model. Because the wave thickness is small compared with the computational domain, a fine mesh is needed, limiting the practicality of the process to two-dimensional geometries. This is the most significant limitation; it is conservative. The two cases described in the paper include an electrolyzer, in which a small release occurs, leading potentially to some damage to the enclosure, and a reformer, in which the consequences are potentially more serious.     

电子封装行业职业有害因素的辨识与分析

从电子封装行业工艺入手,依据国家颁布的职业有害因素分类目录及职业有害因素致病模型,针对电子封装行业插入式(DIP)及表面贴装(QFP/SOIC)制造工艺使用的材料、设备、条件、人员作业特点,对行业内具有共性的职业有害因素进行分析,对工艺过程中存在的职业有害因素作出辨识,并提出把硅粉尘、铅、氩气、高温、环氧树脂、氢氧化钾、噪声、酸雾、重复性静态作业、重复性动态作业等有害因素作为防控重点,为电子封装行业职业有害因素的危害量化评价及其防控措施制定提供了科学依据。     

The impact of motorcycle traffic on soil and vegetation of stabilized coastal dunes, Israel

This study aimed to assess the response of soil and annual plant vegetation of stabilized coastal dunes in Israel, to varying intensities of off-road motorcycle (ORM) traffic, and to assess their resistance and resilience to such a disturbance. A standard experimental procedure that included 0, 20, 50, 100 and 200 ORM straight passes and 150 ORM turn passes was used. Plant ground cover, mean plant height, species richness, species diversity, soil penetrable depth, organic matter and moisture contents were measured on several dates within a period of 372 days after the experiment. Results have shown that: (1) ORM passes had a significant immediate impact on annual plants that increased with traffic intensity. The impact on the soil was detected only as an increase of penetrable depth. (2) The maximum impact on annual plants was observed in the wheel ruts and turn areas. The impact on the area between the wheel ruts and on the margins outside the wheel ruts was indirect and smaller. (3) Annual plant ground cover and mean plant height were less sensitive parameters than species richness and species diversity for determining the impact of ORM traffic on the area. (4) One year after the experiment, soil and annual plant vegetation in all passes were very similar to their pre-experimental condition. This indicates high resilience and recovery potential of the Mediterranean stabilized coastal dune ecosystem to ORM disturbance.     

基于3种时间序列模型的九龙江河流库区藻华预测

湖库富营养化和有害藻华是全球性生态环境问题,藻华预测与早期预警是保障湖库水源地供水安全的关键技术.如何基于高频水生态在线监测数据进行藻华的实时动态预测成为水生态管理领域的重大需求.本研究以福建省九龙江江东库区(水源地)为例,利用3年连续观测的逐时平均总叶绿素a浓度数据,对比研究了SARIMA、Prophet和LSTM(长短期记忆神经网络)3种时间序列模型在藻华(日平均叶绿素a大于15μg·L^-1)预测方面的效果.结果表明：(1)时间序列模型要求参数少,灵活性强,能清晰反映水质特征和未来变化趋势,可弥补传统藻类监测预警方法的局限性;(2)基于深度学习框架的LSTM模型,具有独特的迭代优化算法,对藻类非线性变化特征的识别和预测能力较强,其总叶绿素a逐日预测和7日预测效果均显著优于SARIMA模型和Prophet模型;(3)输入数据长度会在一定程度上影响模型预测效果,最优的输入数据时间长度为7 d;输入数据频率对预测效果也有影响,在预测非藻华日时,小时数据的预测效果优于日频率数据;在预测藻华日时,两种频率数据无显著差异,但日频率数据能更准确识别藻华日特征.总结起来,基于...     

街道峡谷内车辆流动对反应性污染物传播特性影响的模拟研究

采用CFD（计算流体力学）数值模拟的研究方法,使用动网格技术,分析简单光化学反应下车辆流动及不同来流风速对双车道三维街道峡谷内污染物传播特性的影响.结果表明,车辆移动改变了峡谷内气流结构,以及背风侧与迎风侧活性污染物浓度分布的相对大小,有利于污染物在峡谷中的传播扩散;来流风使机动车尾气向建筑背风侧汇聚,并随着风速增加而加强,对近迎风侧车道车辆尾气淹没射流的影响比近背风侧车道大.在车辆移动与来流风的综合作用下,污染物的扩散能力得到显著增强.