Effects of artificially induced complete mixing on dissolved organic matter in a stratified source water reservoir

Naturally complete mixing promotes the spontaneous redistribution of dissolved oxygen(DO), representing an ideal state for maintaining good water quality, and conducive to the biomineralization of organic matter. Water lifting aerators(WLAs) can extend the periods of complete mixing and increase the initial mixing temperature. To evaluate the influence of artificial-induced continuously mixing on dissolved organic matter(DOM) removal performance, the variations of DOM concentrations, optical cha...     

Extracellular polymeric substance induces biogenesis of vivianite under inorganic phosphate-free conditions

Vivianite is often found in reducing environments rich in iron and phosphorus from organic debris degradation or phosphorus mineral dissolution. The formation of vivianite is essential to the geochemical cycling of phosphorus and iron elements in natural environments. In this study, extracellular polymeric substances (EPS) were selected as the source of phosphorus. Microcosm experiments were conducted to test the evolution of mineralogy during the reduction of polyferric sulfate flocs (PFS) by Shewanella oneidensis MR-1 (S. oneidensis MR-1) at EPS concentrations of 0, 0.03, and 0.3 g/L. Vivianite was found to be the secondary mineral in EPS treatment when there was no phosphate in the media. The EPS DNA served as the phosphorus source and DNA-supplied phosphate could induce the formation of vivianite. EPS impedes PFS aggregation, contains redox proteins and stores electron shuttle, and thus greatly promotes the formation of minerals and enhances the reduction of Fe(III). At EPS concentration of 0, 0.03, and 0.3 g/L, the produced HCl-extractable Fe(II) was 107.9, 111.0, and 115.2 mg/L, respectively. However, when the microcosms remained unstirred, vivianite can be formed without the addition of EPS. In unstirred systems, the EPS secreted by S. oneidensis MR-1 could agglomerate at some areas, resulting in the formation of vivianite in the proximity of microbial cells. It was found that vivianite can be generated biogenetically by S. oneidensis MR-1 strain and EPS may play a key role in iron reduction and concentrating phosphorus in the oligotrophic ecosystems where quiescent conditions prevail.     

Phenol degradation in waters with high iodide level by layered double hydroxide-peroxodisulfate: Pathways and products

Recently, layered double hydroxide-peroxodisulfate (LDH-PDS) as an advanced oxidation system can effectively remove organics by the pathway of free radical. However, little has been known if there is a potential risk regarding the formation of high toxic iodine byproducts through another pathway when LDH-PDS is used in high iodide waters at coastal areas. Therefore, this study investigated phenol degradation pathways and transformation products to evaluate both removal mechanism and potential risk by LDH-PDS in high iodide waters. The results showed that in LDH-PDS system, with the degradation of PDS, phenol degraded till below detection limit in 1 hr in the presence of iodide, while PDS and phenol were hardly degraded in the absence of iodide, indicating iodide accelerated the transformation of PDS and the degradation of phenol. What is more, it reached the highest phenol removal efficiency under the condition of 100 mg/L LDH, 0.1 mmol/L PDS and 1.0 mmol/L iodide. In LDH-PDS system, iodide was rapidly oxidized by the highly active interlayer PDS, resulting in the formation of reactive iodine including hypoiodic acid, iodine and triiodide instead of free radicals, which contributed rapid degradation of phenol. However, unfortunately toxic iodophenols were detected. Specifically, 2-iodophenol and 4-iodophenol were formed firstly, afterwards 2,4-diiodophenol and 2,6-diiodophenol were produced, and finally iodophenols and diiodophenols gradually decreased and 2,4,6-Triiodophenol were produced. These results indicated that LDH-PDS should avoid to use in high iodide waters to prevent toxic iodine byproduct formation although iodide can accelerate phenol degradation.     

春节期间烟花爆竹燃放对乌鲁木齐市区PM2.5及其组分影响分析

为了解春节期间烟花爆竹燃放对乌鲁木齐市区PM2.5及其组分的影响,利用超级站在线监测仪器(包括颗粒物分析仪、在线离子色谱、激光雷达和重金属分析仪)对环境空气中的PM2.5浓度、颗粒物水溶性离子和重金属浓度进行连续监测.结果表明,大量烟花爆竹的集中燃放造成了PM2.5短时严重污染,最高质量浓度达到了423μg/m3.烟花...     

A Recourse‐Based Interval Fuzzy Programming Model for Point‐Nonpoint Source Effluent Trading under Uncertainty

In this study, a recourse‐based interval fuzzy programming (RIFP) model is developed for tackling uncertainties expressed as fuzzy, interval, and/or probabilistic forms in an effluent trading program. It can incorporate preregulated water‐pollution control policies directly into its optimization process, such that an effective linkage between environmental regulations and economic implications (i.e., penalties) caused by improper policies due to uncertainty existence can be provided. The RIFP model is applied to point‐nonpoint source effluent trading of the Xiangxi River in China. The efficiency of trading efforts between water quality improvement and net system benefit under different degrees of satisfying discharge limits is analyzed. The results are able to help support (1) formulation of water‐pollution control strategies under various economic objectives and system‐reliability constraints, (2) selection of the desired effluent trading pattern for point and nonpoint sources, and (3) generation of tradeoffs among system benefit, satisfaction degree, and pollutant mitigation under multiple uncertainties. Compared with the traditional regulatory approaches, the results demonstrate that the water‐pollution control program can be performed more cost‐effectively through trading than nontrading.     

长输管道事故数据库的对比分析

从影响长输管道安全的外部因素、事故定义、事故分类以及事故数据分析和事故报告等几个方面,对国际上主要长输管道事故数据库进行了对比分析,提出了建立我国长输管道事故数据库的建议.     

Greenhouse gas emissions from MSW incineration in China: Impacts of waste characteristics and energy recovery

Determination of the amount of greenhouse gas (GHG) emitted during municipal solid waste incineration (MSWI) is complex because both contributions and savings of GHGs exist in the process. To identify the critical factors influencing GHG emissions from MSWI in China, a GHG accounting model was established and applied to six Chinese cities located in different regions. The results showed that MSWI in most of the cities was the source of GHGs, with emissions of 25–207 kg CO₂-eq t^?1 rw. Within all process stages, the emission of fossil CO₂ from the combustion of MSW was the main contributor (111–254 kg CO₂-eq t^?1 rw), while the substitution of electricity reduced the GHG emissions by 150–247 kg CO₂-eq t^?1 rw. By affecting the fossil carbon content and the lower heating value of the waste, the contents of plastic and food waste in the MSW were the critical factors influencing GHG emissions of MSWI. Decreasing food waste content in MSW by half will significantly reduce the GHG emissions from MSWI, and such a reduction will convert MSWI in Urumqi and Tianjin from GHG sources to GHG sinks. Comparison of the GHG emissions in the six Chinese cities with those in European countries revealed that higher energy recovery efficiency in Europe induced much greater reductions in GHG emissions. Recovering the excess heat after generation of electricity would be a good measure to convert MSWI in all the six cities evaluated herein into sinks of GHGs.     

Recovery of Cu and Fe from Printed Circuit Board waste sludge by ultrasound: Evaluation of industrial application

The paper presents a novel cleaner process for metal recovery from the Printed Circuit Board (PCB) waste sludge by assistance of ultrasound. The process can effectively recover heavy metals at low cost with high separation and recovery efficiency, produce high quality products and also achieve zero waste discharge with operation at industrial scale. With the PCB waste sludge containing (wet content) 3.14–4.85% copper and 3.71–4.23% iron, copper recovery efficiency of 95.2–97.5% and iron recovery efficiency of 97.1–98.5% were achieved, while the purity of copper sulfate produced by the process was 98.0% and the produced ferric chloride had a satisfied quality for using as a coagulant material for the plant on-site wastewater treatment. The process had been successfully scaled up to the industrial scaled applications in a heavy metal recovery plant in city of Huizhou, China for more than two years. The novel cleaner heavy metal recovery process has a great prospect on the applications of resources recovery and environmental protection practices.