Residual risk for cytogenetic abnormalities after prenatal diagnosis by interphase fluorescence in situ hybridization (FISH)

Results from conventional cytogenetic studies on 21 609 amniotic fluid specimens were analyzed retrospectively to determine the residual risk for a cytogenetic abnormality if interphase FISH, capable of only detecting aneuploidy for chromosomes 13, 18, 21, X and Y, was performed and did not reveal an abnormality. Detection rates (the probability of detecting a cytogenetic abnormality when an abnormality is present) and residual risks (the likelihood of a cytogenetic abnormality, in view of normal interphase FISH results) were calculated for the four major clinical indications for prenatal diagnosis (advanced maternal age, abnormal maternal serum screen indicating increased risk for trisomy 18 or trisomy 21, abnormal maternal serum screen indicating increased risk for neural tube defects and ultrasound abnormality). Differences in detection rates were observed to depend on clinical indication and presence or absence of ultrasound abnormalities. The detection rate ranged from 18.2 to 82.6% depending on the clinical indication. The detection rates of abnormalities significant to the pregnancy being evaluated (i.e. abnormalities excluding familial balanced rearrangements and familial markers) were between 28.6 and 86.4%. The presence of ultrasound abnormalities increased the detection rate from 72.2 to 92.5% for advanced maternal age and from 78.6 to 91.3% for abnormal maternal serum screen, indicating increased risk for trisomy 18 or trisomy 21. With regard to residual risk, the risk for a clinically significant abnormality decreased from 0.9–10.1%, prior to the interphase FISH assay, to a residual risk of 0.6–1.5% following a normal interphase FISH result in the 4 groups studied. Providing patients with detection rates and residual risks, most relevant to their situation (clinical indication and presence or absence of ultrasound abnormality) during counseling, could help them better understand the advantages and limitations of interphase FISH in their prenatal diagnostic evaluation. Copyright © 2003 John Wiley & Sons, Ltd.     

Degradation kinetics and mechanism of aniline by heat-assisted persulfate oxidation

Oxidation of aniline by persulfate in aqueous solutions was investigated and the reaction kinetic rates under different temperature, persulfate concentration and pH conditions were examined in batch experiments. The results showed that, the aniline degradation followed pseudo first-order reaction model. Aniline degradation rate increased with increasing temperature or persulfate concentration. In the pH range of 3 to 11, a low aniline degradation rate was obtained at strong acid system (pH 3), while a high degradation rate was achieved at strong alkalinity (pH 11). Maximum aniline degradation occurred at pH 7 when the solution was in a weak level of acid and alkalinity (pH 5, 7 and 9). Produced intermediates during the oxidation process were identified using liquid chromatography-mass spectrometry technology. And nitrobenzene, 4-4’-diaminodiphenyl and 1-hydroxy-1,2-diphenylhydrazine have been identified as the major intermediates of aniline oxidation by persulfate and the degradation mechanism of aniline was also tentatively proposed.     

Mechanism of lead immobilization by oxalic acid-activated phosphate rocks

Lead (Pb) chemical fixation is an important environmental aspect for human health. Phosphate rocks (PRs) were utilized as an adsorbent to remove Pb from aqueous solution. Raw PRs and oxalic acid-activated PRs (APRs) were used to investigate the effect of chemical modification on the Pb-binding capacity in the pH range 2.0-5.0. The Pb adsorption rate of all treatments above pH 3.0 reached 90%. The Pb binding on PRs and APRs was pH-independent, except at pH 2.0 in activated treatments. The X-ray diffraction analysis confirmed that the raw PRs formed cerussite after reacting with the Pb solution, whereas the APRs formed pyromorphite. The Fourier Transform Infrared spectroscopy analysis indicated that carbonate (CO₃^2-) in raw PRs and phosphate (PO₄^3-) groups in APRs played an important role in the Pb-binding process. After adsorption, anomalous block-shaped particles were observed by scanning electron microscopy with energy dispersive spectroscopy. The X-ray photoelectron spectroscopy data further indicated that both chemical and physical reactions occurred during the adsorption process according to the binding energy. Because of lower solubility of pyromorphite compared to cerussite, the APRs are more effective in immobilizing Pb than that of PRs.     

Ultrafine particle emission characteristics of diesel engine by on-board and test bench measurement

This study investigated the emission characteristics of ultrafine particles based on test bench and on-board measurements. The bench test results showed the ultrafine particle number concentration of the diesel engine to be in the range of (0.56-8.35) × 10⁸ cm^-3. The on-board measurement results illustrated that the ultrafine particles were strongly correlated with changes in real-world driving cycles. The particle number concentration was down to 2.0 × 10⁶ cm^-3 and 2.7 × 10⁷ cm^-3 under decelerating and idling operations and as high as 5.0 × 10⁸ cm^-3 under accelerating operation. It was also indicated that the particle number measured by the two methods increased with the growth of engine load at each engine speed in both cases. The particle number presented a "U" shaped distribution with changing speed at high engine load conditions, which implies that the particle number will reach its lowest level at medium engine speeds. The particle sizes of both measurements showed single mode distributions. The peak of particle size was located at about 50-80 nm in the accumulation mode particle range. Nucleation mode particles will significantly increase at low engine load operations like idling and decelerating caused by the high concentration of unburned organic compounds.     

1980—2010年温榆河的水环境质量时空演变特征

以温榆河流域的主要超标污染物 COD 和氨氮为研究对象,通过历史数据和现场调查,系统研究了1980—2010年间温榆河的水环境质量时空演变特征.结果表明,温榆河流域水环境质量经历了清洁-污染-重度污染-污染遏制的过程,但水质现状均不达标;温榆河流域水环境质量好坏依次是上段>下段,温榆河>坝河>清河,并且Pearson相关分析表明,温榆河下段COD和NH+4-N浓度主要受清河影响;温榆河流域COD污染逐步遏制(超标倍数<1)、NH+4-N污染凸显(超标倍数8～20),耗氧物质处于从COD为主向NH+4-N为主转换的阶段;支流清河和坝河不仅是温榆河干流入河污染负荷的首要输入途径,而且支流上污水集中处理设施的排水是温榆河干流的首要补给来源(70.1%),其运行状况与升级改造对改善温榆河水环境质量至关重要.     

基于传声器阵列的声源定位技术的应用

基于传声器阵列的声源定位技术中的两个主要方法,STSF和Beamforming声源定位技术两者的实现方法不同。通过对STSF和Beamforming声源定位技术的推导,给出了两种测量技术适用的频率范围和空间范围,从理论上对其应用范围的差异进行了说明,并提出在实际测量中如何选择合适的声源定位方法。结合两种测量技术的特点,提出声源定位技术下一阶段研究的重点。     

污水生化处理耗氧量计算与应用

根据各类型好氧工艺运行的特点,结合多年设计经验,给出详细计算公式和参数选择范围,说明每个参数含义。     

节能型虹吸式滗水器的设计与应用

详细介绍了虹吸式滗水器的构成、特点及工作原理,结合理论和实践经验给出了虹吸式滗水器的设计、计算方法及关键设计参数,提出了常规使用方法,整套设备的设计全面而简单明了。     

改性粉煤灰处理含铬(Ⅵ)地下水的实验研究

用硫酸改性的粉煤灰作为吸附剂,处理含铬(Ⅵ)为5mg/L地下水,最佳条件为:pH=2,液固比10000:3,25℃下反应3h。处理后水样铬(VI)浓度0.03mg/L,满足(GB/T 14848-93)《地下水环境质量标准》。在不改变原水pH条件下,增加粉煤灰用量,水样中铬(VI)浓度也可由5mg/L降至0.05mg/L。同时,吸附剂对铬(VI)的吸附符合Freundlich和Langmuir等温线。     

真空吸尘系统应用于散货码头的积尘清扫

描述了散货码头粉尘污染现状,分析比较了几种常用的积尘清扫方法。为了有效清扫散货码头的积尘,提出采用集中式真空吸尘系统。文章从系统形式、水力计算方法和工程实例等方面简单介绍了集中式真空吸尘系统。印尼Paiton燃煤电厂码头工程设计采用了集中式真空吸尘系统进行积尘清扫,工程建成投产一年多来,积尘清扫效果明显,有效地降低了粉尘污染。实例说明,真空吸尘是解决散货码头积尘清扫问题较为有效的方式。