餐厨垃圾综合资源化处理技术实例研究

在目前餐厨垃圾处理现状基础上,介绍了一种餐厨垃圾处理工艺,采用机械生物处理技术,包括收运系统、粉碎分选预处理、厌氧发酵生物处理、沼气热电联供、有机堆肥、废水处理、除臭系统多个环节,分离出油脂进行回收,垃圾厌氧发酵产生沼气发电,沼渣进行堆肥,以期实现餐厨垃圾减量化、无害化、资源化,解决"垃圾猪"、"地沟油"问题。     

Heavy metal phytoextraction by Sedum alfredii is affected by continual clipping and phosphorus fertilization amendment

Improving the efficacy of phytoextraction is critical for its successful application in metal contaminated soils. Mineral nutrition affects plant growth and metal absorption and subsequently the accumulation of heavy metal through hyper-accumulator plants. This study assessed the effects of di-hydrogen phosphates (KH₂PO₄, Ca(H₂PO₄)₂, NaH₂PO₄ and NH₄H₂PO₄) application at three levels (22, 88 and 352 mg P/kg soil) on Sedum alfredii growth and metal uptake by three consecutive harvests on aged and Zn/Cd combined contaminated paddy soil. The addition of phosphates (P) significantly increased the amount of Zn taken up by S. alfredii due to increased shoot Zn concentration and dry matter yield (DMY) (P<0.05). The highest phytoextraction of Zn and Cd was observed in KH₂PO₄ and NH₄H₂PO₄ treatment at 352 mg P/kg soil. The amount of Zn removed by phytoextraction increased in the order of 1st clipping<2nd clipping<3rd clipping, and for Cd extraction the order was 2nd clipping<1st clipping<3rd clipping. These results indicate that the application of P fertilizers coupled with multiple cuttings can enhance the removal of Zn and Cd from contaminated soils by S. alfredii, thus shortening the time needed for accomplishing remediation goals.     

双表面活性剂修饰下纳米零价铁对水中Cr(Ⅵ)污染去除研究

为解决纳米级零价铁（nZVI）在环境中易团聚、易氧化的问题,强化其去除水中Cr（VI）的能力,选择非离子型表面活性剂聚乙烯吡咯烷酮（PVP）和阴离子表面活性剂油酸钠（NaOA）同时对nZVI进行修饰.同时,通过对比不同pH值、材料干湿状态、初始浓度及共存离子条件下的反应效果,结合材料的XRD和XPS表征、动力学实验和25℃等温线的拟合进行机理分析.结果表明：酸性条件有利于Cr（VI）的去除;材料的干湿状态对去除效率影响较大;材料去除水中Cr（VI）可在3 h内达到反应平衡,去除效率在90%以上,实验条件下最大去除量为183.1 mg·g^-1,反应过程符合准二级动力学模型及Langmuir模型;反应过程中Cr（VI）大部分转化为Cr（Ⅲ）.     

黄河源区鄂陵湖中多环芳烃的百年沉积记录

为研究黄河源区多环芳烃（PAHs）的污染历史,于2016年7月在鄂陵湖中采集了沉积物柱芯,采用²¹⁰Pb定年,利用气相色谱串联三重四级杆质谱仪（GC-MS/MS）分析了16种PAHs,运用有序聚类分析对PAHs的垂向分布进行分带,并采取主成分分析及多元线性回归定量分析了PAHs的来源.结果表明,鄂陵湖沉积柱的沉积速率为0.176cm/a,慢于青藏高原多数湖泊.总PAHs的含量为11.3~54.7ng/g,平均值为29.2ng/g,与其他高原和偏远地区湖泊沉积物相比,处于较低水平,可被视为PAHs的全球沉积物背景值.PAHs的垂向变化分为1948年以前、1948~1976和1976~2016年3个时间段,5~6环PAHs在1948~2016年间呈上升趋势,与青海省人口及大型牲畜数量显著相关,反映了鄂陵湖地区近70a来的人类活动以农牧业为主.PAHs来源分为本地源（23%）以及长距离迁移与本地混合源（77%）.本地源的垂向变化与5~6环PAHs一致,代表了青藏高原地区以牛粪饼为主要燃料的生物质燃烧源.     

给水管网多相界面中微生物表面疏水性研究

采用疾病控制中心（CDC）生物膜反应器模拟给水管网系统,选取聚氯乙烯（PVC）和聚碳酸酯（PC）2种材质的挂片,通过微生物粘附碳氢化合物（MATH）实验和Illumina高通量测序相结合的方法,对反应器水相、生物膜相和颗粒物相中微生物的疏水性进行了研究.结果显示,PVC材质挂片反应器中优势菌为厚壁菌门,相对丰度为68.31%~81.00%,PC材质挂片反应器中优势菌为变形菌门,相对丰度为24.39%~64.40%.PVC材质挂片反应器中优势菌包含3类致病菌,PC材质挂片反应器中包含8类致病菌.PC材质挂片生物膜相较于PVC材质疏水性更高,利于微生物吸附形成生物膜,而PVC材质不易形成生物膜,对控制输送过程中的二次污染具有积极作用,但在管网实际应用中还应考虑其他工程因素的影响.     

The simultaneous removal of ammonium and manganese from surface water by MeOx: Side effect of ammonium presence on manganese removal

Manganese and ammonium pollution in surface water sources has become a serious issue.In this study, a pilot-scale filtration system was used to investigate the effect of ammonium on manganese removal during the simultaneous removal of ammonium and manganese from surface water using a manganese co-oxide filter film(MeO_x ). The results showed that the manganese removal efficiency of MeO_x in the absence of ammonium was high and stable, and the removal efficiency could reach 70% even at 5.5 °C. When the influent ammonium concentration was lower than 0.7 mg/L, ammonium and manganese could be removed simultaneously. However, at an ammonium concentration of 1.5 mg/L, the manganese removal efficiency of the filter gradually decreased with time(from 96% to 46.20%). Nevertheless, there was no impact of manganese on ammonium removal. The mechanism by which ammonium negatively affected manganese removal was investigated, demonstrating that ammonium affected manganese removal mainly through two possible mechanisms. On one hand, the decreased p H caused by ammonium oxidation was unfavorable for the oxidation of manganese by MeO_x ; on the other hand, the presence of ammonium slowed the growth of new MeO_x and retarded the increase in the specific surface area of the Me Ox-coated sand, and induced changes in the morphology and crystal structure of Me Ox. Consequently, the manganese removal efficiency of the filter decreased when ammonium was present in the inlet water.     

Temporal variability of visibility and its parameterizations in Ningbo, China

Simultaneous and continuous measurements of visibility, meteorological parameters and air pollutants were carried out at a suburban site in Ningbo from June 1, 2013 to May 31,2015. The characteristics of visibility and their relationships with air pollutants and meteorological factors were investigated using multiple statistical methods. Daily visibility ranged from 0.6 to 34.1 km, with a mean value of 11.8 km. During the 2-year experiment,43.4% of daily visibility was found to be less than 10.0 km and only 9.2% was greater than 20.0 km. Visibility was lower in winter with a frequency of 53.4% in the range of 0.0–5.0 km.Annual visibility had an obvious diurnal variation, with the lowest and highest visibility being 7.5 km at approximately 06:00 local time and 15.6 km at approximately 14:00 local time, respectively. Multiple correspondence analysis(MCA) indicated that the different ranges of visibility were significantly affected by different levels of pollutants and meteorological conditions. Based on the analyses, visibility was found to be an exponential function of PM_(2.5) concentrations within a certain range of relative humidity. Thus, nonlinear models combining multiple linear regressions with exponential regression were subsequently developed using the data collected from June 2014 to May 2015, and the data from June 2013 to May 2014 was used to evaluate the performance of the model. It was demonstrated that the derived models can quantitatively describe the relationships between visibility, air quality and meteorological parameters in Ningbo.     

Highly catalytic activity of Mn/SBA-15 catalysts for toluene combustion improved by adjusting the morphology of supports

Rod-like, hexagonal and fiber-like SBA-15 mesoporous silicas were synthesized to support MnO_x for toluene oxidation. This study showed that the morphology of the supports greatly influenced the catalytic activity in toluene oxidation. MnO_x supported on rod-like SBA-15(R-SBA-15) displayed the best catalytic activity and the conversion at 230°C reached more than 90%, which was higher than the other two catalysts. MnO_x species consisted of coexisting MnO_2 and Mn_2O_3 on the three kinds of SBA-15 samples. Large amounts of Mn_2O_3 species were formed on the surface and high oxygen mobility was obtained on MnO_x supported on R-SBA-15, according to the H_2 temperature programmed reduction(H_2-TPR)and X-ray photoelectron spectroscopy(XPS) results. The Mn/R-SBA-15 catalyst with greater amounts of Mn_2O_3 species possessed a large amount of surface lattice oxygen, which accelerated the catalytic reaction rate. Therefore, the surface lattice oxygen and high oxygen mobility were critical factors on the catalytic activity of the Mn/R-SBA-15 catalyst.     

One-step synthesis of Cu(II) metal–organic gel as recyclable material for rapid, efficient and size selective cationic dyes adsorption

Efficient removal of non-biodegradable and hazardous dyes from wastewater remains a hot research topic. Herein, a rationally designed a Cu(Ⅱ)-based metal–organic gel(Cu-MOG) with a nanoporous 3 D network structure prepared via a simple one-step mixing method was successfully employed for the removal of cationic dyes. The Cu-MOG exhibited high efficiency, with an adsorption capacity of up to 650.32 mg/g, and rapid adsorption efficiency, with the ability to adsorb 80% of Neutral Red within 1 min. The high adsorption efficiency was attributed to its large specific surface area, which enabled it to massively bind cationic dyes through electrostatic interaction, and a nanoporous structure that promoted intra-pore diffusion. Remarkably, the Cu-MOG displayed size-selective adsorption, based on adsorption studies concerning dyes of different sizes as calculated by density functional theory. Additionally, the adsorption performance of the Cu-MOG still maintained removal efficiency of 100% after three regeneration cycles. These results suggested that the Cu-MOG could be expected to be a promising and competitive candidate to conveniently process wastewater.     

Contribution of the Kodama and 4S pathways to the dibenzothiophene biodegradation in different coastal wetlands under different C/N ratios

Dibenzothiophene (DBT) degradation mechanisms and the transformation of pathways during the incubation of three types of coastal sediments with C/N ratios ranging from 1 to 9 were investigated. The DBT degradation efficiencies were clearly improved with increasing C/N ratio in reed wetland sediments, tidal wetlands sediments and estuary wetland sediments. The quantitative response relationships between DBT degradation rates and related functional genes demonstrate that the Kodama pathway-related gene groups were dominant factors at low C/N ratios, while the 4S-related gene groups mainly determined the degradation rate when the C/N ratio was up to 5. Network analysis also shows that the pathway shifts from the Kodama pathway to the 4S pathway occurred through changes in the connections between functional genomes and rates. Furthermore, there were competition and collaboration between the Kodama and 4S pathways. The 4S pathway-related bacteria were more active in estuary wetland sediments compared with reed wetland sediments and tidal wetland sediments. The higher degradation efficiency in estuary wetland sediments may indicate the greater participation of the 4S pathway in the DBT biodegradation reaction. And the effects of ring cleavage of Kodama pathway caused more complete metabolizing of DBT.