“生物墙”对废水处理技术的研究

生物墙是一种高效、无动力、无运行费用的生化处理技术,应用于人工湿地污水处理,可对比较难处理的废水进行深度处理而且取得良好的处理效果,同时运行费用低。     

循环硫化床锅炉脱硫率主要影响因素

循环流化床锅炉添加石灰石脱硫技术近年来得到了很大的发展,它具有脱硫效率高,脱硫成本低,操作简单、无水污染等特点.本文分析概括了循环流化床锅炉添加石灰石脱硫工艺脱硫率的主要影响因素     

佛山市污水处理厂运行现状及对策浅析

针对佛山市城镇污水处理厂实际运行水质远小于设计值、进水浓度偏低的现状,探讨了问题产生的原因,并提出了可供选择的对策方案.     

SnAgCu焊料中Sn元素在模拟土壤溶液中的浸出行为

研究了Sn-3.5Ag-0.75Cu无铅焊料及其与Cu基板的钎焊接头在模拟土壤的NaCl,NaCl-Na2SO4和NaCl-Na2SO4-Na2CO3溶液中Sn元素的浸出行为.结果表明:焊料在NaCl-Na2SO4-Na2CO3溶液中Sn的浸出相对严重;而接头在NaCl溶液中Sn的浸出量最多.在Sn浸出量多的焊料和接头表面形成厚而疏松的腐蚀产物,XRD分析表明其产物主要由SnO,SnO2和Sn4(OH)6Cl2组成.动电位极化测试分析表明接头中Cu基板与焊料合金之间的电偶腐蚀是焊料合金与接头在同种溶液中Sn元素浸出差异的主要原因.     

Novel Co-Mg-Al-Ti-O catalyst derived from hydrotalcite-like compound for NO storage/decomposition

Catalysts of Co_1.5Mg_1.5/Al_0.9Ti_0.1O and Co_1.5Mg_1.5/AlO were successfully prepared by calcinations of corresponding hydrotalcite-like compounds at 800℃ for 4 hr. The derived oxides were of spinel phase and a small quantity of Ti substitution did not change the crystal purity. Their catalytic performance for the NO storage/decomposition was investigated. Ti incorporation enhanced the NO decomposition activity while has an opposite effect on the storage capacity of catalyst. In situ FT-IR spectra of the catalysts showed that the final adsorption species on the catalysts was coordinated nitrates/nitrites. In addition, NO storage/decomposition mechanism has been discussed on the basis of these observations.     

Aerosol structure and vertical distribution in a multi-source dust region

The vertical distribution of aerosols was directly observed under various atmospheric conditions in the free troposphere using surface micro-pulse lidar (MPL4) at the Zhangye Station (39.08°N, 100.27°E) in western China in the spring of 2008. The study shows that the aerosol distribution over Zhangye can be vertically classified into upper, middle and lower layers with altitudes of 4.5 to 9 km, 2.5 to 4.5 km, and less than 2.5 km, respectively. The aerosol in the upper layer originated from the external sources at higher altitude regions, from far desert regions upwind of Zhangye or transported from higher atmospheric layers by free convection, and the altitude of this aerosol layer decreased with time; the aerosols in the middle and lower layers originated from both external and local sources. The aerosol extinction coefficients in the upper and lower layers decreased with altitude, whereas the coefficient in the middle layer changed only slightly, which suggests that aerosol mixing occurs in the middle layer. The distribution of aerosols with altitude has three features: a single peak that forms under stable atmospheric conditions, an exponential decrease with altitude that occurs under unstable atmospheric conditions, and slight change in the mixed layer. Due to the impact of the top of the atmospheric boundary layer, the diurnal variation in the aerosol extinction coefficient has a single peak, which is higher in the afternoon and lower in the morning.     

碳源对工业污染场地土壤中HCHs和DDTs降解的促进作用

我国对有机氯农药的大量需求使得在农药生产、加工和分装等过程中造成了许多城镇中存在有机氯农药污染场地,限制了土地的后续开发利用.本研究选取3种类型的碳源组成有机修复剂A、B、C,添加到受有机氯工业污染场地土壤中进行微生物降解试验,并对比了3种修复剂的效果.试验过程中,反应体系水分含量为50％,添加零价金属调节氧化还原电位,采用好氧/厌氧交替循环方式进行生物降解.实验结果表明:3种修复剂对HCHs和DDTs的降解都有显著促进作用.与DDTs相比,HCHs较易降解.90 d内,添加修复剂(A、B、C)的处理中∑HCH的浓度分别从73.37~85.71 mg·kg^-1降解到了15.88~38.21 mg·kg^-1.与未添加修复剂的对照相比较,∑HCH的降解率提高了19%~52%,90 d内,ΣHCH的降解率最高可达81%.添加修复剂(A、B、C)的处理中ΣDDT的浓度分别从91.68~119.79 mg·kg^-1降解到了45.1~60.7 mg·kg^-1,相对未添加修复剂的对照试验,∑DDT的降解率提高了39%~45%,30 d内∑DDT的降解率最高可达到51%,但30 d后降解效率无明显增加.就不同类型碳源的促进作用来看,C/N最高,而含水率最低的修复剂B的效果最好,而C/N比最低而含水率最高的修复剂A效果最差.     

二维砂箱溶质示踪实验的图像分析法

有色示踪剂在砂箱溶质运移实验中有着广泛的应用,因此,本文介绍了一种通过对数字图像进行分析以确定多孔介质中有色示踪剂浓度分布的方法.在实验过程中,通过建立有色示踪剂浓度与图像颜色要素之间的定量关系,从而能够利用数字图像迅速确定某一时刻砂箱内部的示踪剂浓度分布.结果发现,与传统定点采样方法相比,图像分析法可以达到更高的空间和时间分辨率,从而观察到有可能被忽视的重要溶质运移过程,能够为地下水溶质运移实验研究提供了一种经济实用和高空间分辨率的数据采集手段.但由于色彩空间变化范围的限制,图像分析法只能在一定溶质浓度范围内适用.     

铝钛改性MCM-41材料对污水中铅镉的吸附研究

研究了改性MCM-41材料对污水中重金属铅、镉离子的吸附行为。在MCM-41材料中加入Al、Ti两种诱因金属离子来合成新的Al-Ti-MCM-41及Ti-Al-MCM-41改性材料,通过氮气吸附-脱附等温线对Al-Ti-MCM-41(Al/Ti=1∶1)及Al-Ti-MCM-41(Al/Ti=2∶1)样品进行了表征,并采用改性后的MCM-41材料为吸附剂对含有二价铅、镉离子的溶液进行吸附实验,考察了吸附剂投加量,Pb2+、Cd2+初始质量浓度和吸附温度对吸附的影响。结果表明:改性Al-Ti-MCM-41(Al/Ti=1∶1)材料的最可几孔径和比孔容分别为16.68 nm和0.046 cm3/g,由BJH计算得到的平均孔径为17.02 nm;Al-Ti-MCM-41(Al/Ti=2∶1)的最可几孔径和比孔容分别为16.88 nm和0.083 cm3/g,由BJH计算得到的平均孔径为17.08 nm。Al-Ti-MCM-41(Al/Ti=1∶1)对Cd2+的吸附率为99.8%;Al-Ti-MCM-41(Al/Ti=2∶1)对Pb2+的吸附率为99.96%;Pb2+和Cd2+的吸附容量随吸附剂投加量的增加而降低,随离子初始浓度的增大而增加;温度越高越有利于吸附。该研究重点考察改性MCM-41材料在重金属铅镉离子污染治理中的性能,从而为解决重金属铅镉的污染,加强环境保护提供理论支撑和技术支持,具有明确的现实意义。