Aerosol Filtration by Sorbent Beds

Fixed beds of sorbent media are used for the evaluation of poiynuclear aromatic hydrocarbons (PAH) present in air. Twostage sampling and separate extraction and analyses of PAH associated with aerosol particles and those present in the vapor state are usually performed. The ability of commonly used sorbents to retain particulate matter introduces a potential for reducing the time and cost of PAH evaluation procedures.

The filtration efficiency of three sorbent media, Florisil, XAD-2, and polyurethanefoam (PUF), for particles in 0.1 to 1 µm size range was studied using airflow rates from 4 to 2501 /mm through a PS 1 sorbent cartridge. Theoretical considerations were used to identify the principal filtration mechanisms and to assess the predictability of the aerosol filtration performance of sorbent filters. The results of this study indicate XAD-2 to be an efficient filtration medium owing to the electrostatic enhancement of capturing and retaining aerosol particles.

As a result of theoretical considerations, Brownian diffusion and inertial deposition were found to be major filtration mechanisms accompanied by electrostatic effects. While the efficiency of the diffusional deposition mechanism was reasonably well predicted with available theories, modeling of submicron particle impaction at higher fluid velocities appeared to be inadequate. Further developments are suggested to improve our understanding of filtration phenomena in sorbent beds under high flow rate conditions.     

Application of microbial hot spots enhances pesticide degradation in soils

Through transfer of an active, isoproturon degrading microbial community, pesticide mineralization could be successfully enhanced in various soils under laboratory and outdoor conditions. The microbes, extracted from a soil having high native ability to mineralize this chemical, were established on expanded clay particles and distributed to various soils in the form of microbial "hot spots". Both, diffusion controlled isoproturon mass flow towards these "hot spots" (6microg d(-1)) as well as microbial ability to mineralize the herbicide (approximately 5microg d(-1)) were identified as the main processes enabling a multiple augmentation of the native isoproturon mineralization even in soils with heavy metal contamination. Soil pH-value appears to exert an important effect on the sustainability of this process.     

The influence of EDDS and EDTA on the uptake of heavy metals of Cd and Cu from soil with tobacco Nicotiana tabacum

Phytoextraction, the use of plants to extract contaminants from soils and groundwater, is a promising approach for cleaning up soils contaminated with heavy metals. In order to enhance phytoextraction the use of chelating agents has been proposed. This study aims to assess whether ethylene diamine disuccinate (EDDS), a biodegradable chelator, can be used for enhanced phytoextraction purposed, as an alternative to ethylene diamine tetraacetate (EDTA). EDDS revealed a higher toxicity to tobacco (Nicotiana tabacum) in comparison to EDTA, but no toxicity to microorganisms. The uptake of Cu was increased by the addition of EDTA and EDDS, while no increase was observed in the uptake of Cd. Both chelating agents showed a very low root to shoot translocation capability and the translocation factor was lower than the one of the control. Heavy metals where significantly more phytoavailable than in the control, even after harvesting, resulting in a high heavy metal leaching possibility, probably owing to a low biodegradation rate of EDDS. New seedlings which were transplanted into the EDDS treated pots 7d after the phytoextraction experiment, showed signs of necrosis and chlorosis, which resulted in a significantly lower biomass in comparison to the control. The seedlings on the EDTA treated pots showed no toxicity signs. Contrary to previous opinions the results of this study revealed the chelating agents EDTA and EDDS as unsuitable for enhanced phytoextraction using tobacco.     

Volatile nanoparticle formation and growth within a diluting diesel car exhaust

A major source of particle number emissions is road traffic. However, scientific knowledge concerning secondary particle formation and growth of ultrafine particles within vehicle exhaust plumes is still very limited. Volatile nanoparticle formation and subsequent growth conditions were analyzed here to gain a better understanding of "real-world" dilution conditions. Coupled computational fluid dynamics and aerosol microphysics models together with measured size distributions within the exhaust plume of a diesel car were used. The impact of soot particles on nucleation, acting as a condensational sink, and the possible role of low-volatile organic components in growth were assessed. A prescribed reduction of soot particle emissions by 2 orders of magnitude (to capture the effect of a diesel particle filter) resulted in concentrations of nucleation-mode particles within the exhaust plume that were approximately 1 order of magnitude larger. Simulations for simplified sulfuric acid-water vapor gas-oil containing nucleation-mode particles show that the largest particle growth is located in a recirculation zone in the wake of the car. Growth of particles within the vehicle exhaust plume up to detectable size depends crucially on the relationship between the mass rate of gaseous precursor emissions and rapid dilution. Chassis dynamometer measurements indicate that emissions of possible hydrocarbon precursors are significantly enhanced under high engine load conditions and high engine speed. On the basis of results obtained for a diesel passenger car, the contributions from light diesel vehicles to the observed abundance of measured nucleation-mode particles near busy roads might be attributable to the impact of two different time scales: (1) a short one within the plume, marked by sufficient precursor emissions and rapid dilution; and (2) a second and comparatively long time scale resulting from the mix of different precursor sources and the impact of atmospheric chemistry.     

Characterization of pore scale NAPL morphology in homogeneous sands as a function of grain size and NAPL dissolution

In this study, we investigate pore scale morphology of nonaqueous phase liquids (NAPLs) trapped in different pore sizes using tracer techniques. Specific interfacial area and saturation of NAPL trapped in homogeneous sands were measured using the interfacial and partitioning tracer techniques. The observed NAPL-water interfacial areas increased in a log-linear fashion with decreasing sand grain size, but showed no clear trend with residual NAPL saturation formed in the various grain sizes. The measured values were used to calculate the NAPL morphology index, which characterizes the spatial NAPL distribution within the pore space. The NAPL morphology indices, increased exponentially with decreasing grain size, indicating that the NAPL becomes smaller, but more blobs. For a fixed grain size, the specific interfacial area and saturation of the NAPL were measured following changes caused by dissolution using alcohol. The observed interfacial areas showed a decrease linearly as a function of the NAPL saturation.     

Local Perceptions of Changes in Traditional Ecological Knowledge: A Case Study from Malekula Island,Vanuatu

Traditional ecological knowledge (TEK) is a critical global resource that may be eroding amid social and environmental change. Here, we present data on local perceptions of TEK change from three communities on Malekula Island in Vanuatu. Utilizing a structured interview (n = 120), we find a common perception of TEK loss. Participants defined two key periods of TEK erosion (roughly 1940–1960 and 1980–present), and noted that TEK decline was driven both external (e.g., church) and internal (e.g., shifting values) processes. Erosion was perceived to more comprehensive in the worldview domain than in aspects of ethnobiological knowledge and practice. These data indicate the perceived fragility of TEK systems and the complexity of TEK change. TEK systems are critical to natural resource management, and data such as these will assist in designing nuanced responses to the ongoing loss of cultural knowledge and practice.     

Wind Tunnel Modelling of Roadways: Comparison with Mathematical Models

The assessment of air quality impacts from roadways is a major concern to urban planners. In order to assess future road and building configurations, a number of techniques have been developed, including mathematical models, which simulate traffic emissions and atmospheric dispersion through a series of mathematical relationships and physical models. The latter models simulate emissions and dispersion through scaling of these processes in a wind tunnel. Two roadway mathematical models, HIWAY-2 and CALINE-4, were applied to a proposed development in a large urban area. Physical modelling procedures developed by Rowan Williams Davies & Irwin Inc. (RWDI) in the form of line source simulators were also applied, and the resulting carbon monoxide concentrations were compared. The results indicated a factor of two agreement between the mathematical and physical models. The physical model, however, reacted to changes in building massing and configuration. The mathematical models did not, since no provision for such changes was included in the mathematical models. In general, the RWDI model resulted in higher concentrations than either HIWAY-2 or CALINE-4. Where there was underprediction, it was often due to shielding of the receptor by surrounding buildings. Comparison of these three models with the CALTRANS Tracer Dispersion Experiment showed good results although concentrations were consistently underpredicted.     

Brominated flame retardant concentrations and trends in abiotic media

BFR burdens in abiotic media have been less studied than in biota, despite their essential value as an aide to identifying sources, temporal and geographic trends and exposure routes. Many polymer products consist of several percent by weight of BFRs. Global trade in these can result in rapid and wholesale BFR movement. Loss from in-use products of nonreactive BFRs may be important, particularly in respect to indoor exposure. In the case of BDE-209, discharges from publicly owned treatment works may be substantial. BFR burdens in air, water and sewage sludge respond rapidly to changes in environmental BFR inputs. PBDEs have been the most widely studied. In many locales PBDE burdens in these media now surpass those of PCBs. Air and water near sources and urban areas are typically enriched relative to rural locales. The more volatile PBDEs dominate in the vapor phase, while BDE-209 typically predominates on particulates. Evidence exists for long-range transport of the more volatile PBDEs. A greater diversity of BFRs (mostly PBDEs, HBCD and TBBP-A) has been detected in sewage sludges. Land application of these sludges on agricultural fields is one conduit for soil contamination. In general, environmental concentrations of BDE-209 appear to be increasing, while penta-BDE burdens in Europe may have peaked. Sediments function as longer-term integrators of environmental burdens. Concentrations of common BFRs therein may be substantial near point sources. Evidence for debromination in the environment has been limited to date. However, some laboratory and field observations suggest it is possible to a limited extent.