WATER HARVESTING TREATMENT EVALUATION AT GRANITE REEF1

ABSTRACT: Yearly runoff efficiencies (total runoff/total precipitation), threshold retentions (precipitation needed to initiate runoff), and runoff-efficiencies-after-thresholds were determined for several water-harvesting catchment treatments at the Granite Reef test site. This information was found to be useful for showing (1) overall performance of catchments with time; (2) the distribution of the precipitation among runoff, surface retention, and infiltration; (3) why, how, and when certain treatments weathered and failed; (4) when to repair treatments; and (5) how to design catchments (size, site preparation, material selection, etc.). New impermeable membranes with smooth surfaces yielded nearly 100% of the precipitation. An asphalt-fiberglass treatment continues this high efficiency after 10 years of weathering – polyethylene after 8; efficiency of butyl sheeting was high initially but decreased rapidly after 9 years weathering. A standard roofing treatment retained up to 30% of the precipitation in the gravel covering. A concrete catchment lost as much as 50% of the total precipitation through micropores and surface cracks. Silicone treatments rapidly lost repellancy and efficiency, while paraffin treatments have weathered 5 years with little loss of efficiency.     

THE EFFECT OF DATA INDEPENDENCE IN MODEL CALIBRATION AND MODEL TESTING1

ABSTRACT: With the increased use of models in hydrologic design, there is an immediate need for a comprehensive comparison of hydrologic models, especially those intended for use at ungaged locations (i.e., where measured data are either not available or inadequate for model calibration). But some past comparisons of hydrologic models have used the same data base for both calibration and testing of the different models or implied that the results of model calibration are indicative of the accuracy at ungaged locations. This practice was examined using both the regression equation approach to peak discharge estimation and a unit hydrograph model that was intended for use in urban areas. The results suggested that the lack of data independence in the calibration and testing of regression equations may lead to both biased results and misleading statements about prediction accuracy. Additionally, although split-sample testing is recognized as desirable, the split-samples should be selected using a systematic-random sampling scheme, rather than random sampling, because random sampling with small samples may lead to a testing sample that is not representative of the population. A systematic-random sampling technique should lead to more valid conclusions about model reliability. For models like a unit hydrograph model, which are more complex and for which calibration is a more involved process, data independence is not as critical because the data fitting error variation is not as dominant as the error variation due to the calibration process and the inability of the model structure to conform with data variability.     

The role of the social and physical environment in privacy maintenance among the Iban of Borneo

Altman's (1977) theory of privacy as a cultural universal is examined by analyzing the privacy mechanisms of the Iban of Sarawak (Borneo). The Sarawak Dayaks live in communal longhouses which appear to offer little physical opportunity for individual privacy. However, the authors found that social mechanisms were utilized to obtain privacy. Thus, despite the communal physical environment of the Sarawak Iban, support is found for a system of privacy. The implications of these findings for other cultures and settings where the physical environment appears to limit control of privacy is discussed.     

THE MILWAUKEE POLLUTION CASE - IMPLICATIONS FOR WATER RESOURCES PLANNING1

ABSTRACT: The Illinois v. Milwaukee Federal District Court decision is the most far reaching application yet of the federal common law of nuisance to interstate water pollution conflicts. Although a Federal Appelate Court recently rescinded part of the district court decision, Milwaukee must still upgrade its metropolitan sewage system to a level beyond that required by federal and state regulations. The improvements must be completed with or without federal aid. The case points out the apparent inability of the Clean Water Act, the most comprehensive federal legislation affecting the nation's water quality, to deal with certain interstate water quality conflicts. The Milwaukee decision could set a precedent for similar settlements elsewhere which may in turn affect the U.S. Environmental Protection Agency's water quality clean up program. A more integrated, ecosystem conscious approach to management of shared water resources (e.g., the Great Lakes) would help reduce the need for court decisions like Illinois v. Milwaukee.     

WATER SUPPLY AS A LIMITING FACTOR IN WESTERN ENERGY DEVELOPMENT1

ABSTRACT: This paper discusses the consumptive water needs of the various energy conversion processes including oil shale retorting, coal gasification and liquefaction, electric power generation, and slurry pipelines. Projected energy development water needs in the upper Colorado River and Upper Missouri River basins are compared with projected agricultural needs and water available. The comparative cost and values of water to energy and agricultural development are discussed to emphasize this as well as the political and social factors entering into the picture.     

INTERDISCIPLINARY ENVIRONMENTAL ANALYSIS FOR TIMBER SALE PLANNING1

ABSTRACT: A method of project planning for systematically assessing and recording impacts of alternative timber harvest startegies for subareas of a sale planning area is presented. This method uses an interdisciplinary team composed of specialists and decisionmaker to develop and analyze treatment alternatives and uses impact prediction matrices with explicit evaluation criteria to illustrate and record ratings of impacts on resource factors. The method is a system for organizing, for discovering appropriate alternatives, for facilitating interaction, and for documenting environmental analysis. It provides for decisionmaker control over the project, for exchange of value perspectives, and for reduction in conflict between specialists. The quality of decisions which result from the method presented depends upon the information available and the effectiveness of interaction between all members of the interdisciplinary team.     

The connecticut indirect source review: A methodology and model for evaluating CO concentrations

The body of information presented in this paper is directed to air pollution engineers who are concerned with the effect of indirect sources on ambient concentrations of carbon monoxide (CO). Data taken under controlled conditions are used to empirically derive and calibrate a model for predicting CO concentrations in the vicinity of roadway intersections and other points of possible vehicular congestion. Since the predicted free flow CO contribution of vehicles traveling at normal road speeds is relatively low, it is concluded that idling vehicles at points of congestion are the major cause of CO violations, and that state and federal programs should place more emphasis on relieving congestion and reducing idling emission rates in new vehicles.     

Ambient carbon monoxide monitoring and instrumentation

The information presented in this paper is directed to air pollution engineers who are concerned with monitoring Carbon Monoxide. This paper evaluates systems for CO sampling under conditions where the receptor is located at intersections within 40 meters of the road edge. Non-Dispersive Infrared and electrochemical analysis techniques are used in conjunction with continuous recording, continuous bag sampling, and meter readings at 5 second intervals. The relative accuracy of each system is examined and the conditions for which each system is best suited are described.     

Air pollution in California: Manufacturing vs. services

Relative to manufacturing, service activities are often considered by planners and officials to generate considerably less environmental pollution. This hypothesis is tested by means of an examination of the economic linkages of both manufacturing and service activities and of the resulting direct and indirect emissions of five air pollutants per dollar of output in the California statewide air basin and in four regional basins within the state. Overall acceptance or rejection of the hypothesis depends in part on the particular pollutant and air basin considered but, most importantly, on the judgement as to what activities are to be considered as service activities.This paper is based on research sponsored by the California Air Resources Board under Agreement A7-143-30.