Investigation of unrecognized former secondary lead smelting sites: confirmation by historical sources and elemental ratios in soil

Twelve suspected former secondary lead smelting sites were investigated. Ten of the sites were confirmed to be former secondary lead smelters or lead works by historical fire insurance maps and contemporaneous metal industry trade directories. At eight sites sampled, the ratio Sb:Pb was closer to ratios from 10 known lead smelting sites than were the As:Pb and Cd:Pb ratios. Data from the 10 known lead smelting sites showed that the Sb:Pb ratio is most characteristic of secondary lead smelting sites. This is because the primary alloy smelted at such sites is antimonial lead. Lead contamination at the eight sites investigated here can be attributed At least in part to the former smelters because of the association between Sb and Pb.     

Yield and Water Productivity of Winter Wheat under Various Irrigation Capacities

The Agricultural Production Systems sIMulator model validated in a prior study for winter wheat was used to simulate yield, aboveground crop biomass (BM), transpiration (T), and evapotranspiration under four irrigation capacities (ICs) (0, 1.7, 2.5, and 5 mm/day) with two nitrogen (N) application rates (N1, 94 kg N/ha; N2, 160 kg N/ha) to (1) understand the performance of winter wheat under different ICs and (2) develop crop water production function under various ICs and N rates. Evaluation was based on yield, aboveground crop BM, transpiration productivity (TP), crop water productivity (WP), and irrigation WP (IWP). Simulation results showed winter wheat yield increased with increase in N application rate and IC. However, the rate of yield increase gradually reduced with additional irrigation beyond 2.5 mm/day. A 5 mm/day IC required a total of 190 mm irrigation and produced a 5%–16% yield advantage over 2.5 mm/day. This indicates it is possible to reduce groundwater use for wheat by 50% incurring only 5%–16% yield loss relative to 5 mm/day. The TP and IWP for grain were slightly higher under IC of 1.7 mm/day (15.2–16.1 kg/ha/mm and 0.98–1.6 kg/m³) when compared to 5 mm/day (14.7–15.5 kg/ha/mm and 0.6–1.06 kg/m³), respectively. Since TP and IWPs are relatively higher under lower ICs, winter wheat could be a suitable crop under lower ICs in the region. Relationship between yield–T and yield–ET was linear with a slope of 15–16 and 9.5–10 kg/ha/mm, respectively. Editor's note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

Low paternity in the hornet Vespa crabro indicates that multiple mating by queens is derived in vespine wasps

Queen mating frequency was studied in the European hornet, Vespa crabro, by analyzing four DNA microsatellite loci in 20 workers from each of 14 nests. Queens were found to be predominantly singly mated (9/14), although double (4/14) and triple mating (1/14) also occurred. For most multiply mated queens, paternity was significantly biased with the majority male fathering on average 80% of the female offspring. The population-wide effective mating frequency was therefore low (1.11), and sister-sister relatedness high (0.701 ± 0.023 SE). Low effective mating frequency in Vespa, in combination with data from other vespines, suggests that high paternity frequency is derived in the group. Some problems with the non-detection of fathers, where the queen was not sampled or shared alleles with males, are analyzed. Received: 16 November 1998 / Received in revised form: 29 March 1999 / Accepted: 12 April 1999     

Leaching of metals from fly ashes in the presence of complexing agents

The leachability of some metals (Al, As, Ba, Ca, Cr, Cu, Fe, K, Mg, Mn, Ti, Zn) from fly ashes was studied in the presence of ethylenediamine tetraacetic acid (EDTA) and naturally occurring complexing agents-humic acids (HAs). Secondary complex-forming equilibria taking place in the leachates increase significantly the leached amounts of most metals. Kinetic experiments showed that almost the whole "available" amounts of metals are leached from fly ash within a time period of several hours (mostly within 20 h), with exceptions of matrix constituents (typically aluminium), which are released more slowly.     

The influence of successional processes and disturbance on the structure of Tsuga canadensis forests

Old-growth forests are valuable sources of ecological, conservation, and management information, yet these ecosystems have received little study in New England, due in large part to their regional scarcity. To increase our understanding of the structures and processes common in these rare forests, we studied the abundance of downed coarse woody debris (CWD) and snags and live-tree size-class distributions in 16 old-growth hemlock forests in western Massachusetts. Old-growth stands were compared with eight adjacent second-growth hemlock forests to gain a better understanding of the structural differences between these two classes of forests resulting from contrasting histories. In addition, we used stand-level dendroecological reconstructions to investigate the linkages between disturbance history and old-growth forest structure using an information-theoretic model selection framework. Old-growth stands exhibit a much higher degree of structural complexity than second-growth forests. In particular, old-growth stands had larger overstory trees and greater volumes of downed coarse woody debris (135.2 vs. 33.2 m3/ha) and snags (21.2 vs. 10.7 m3/ha). Second-growth stands were characterized by either skewed unimodal or reverse-J shaped diameter distributions, while old-growth forests contained bell-shaped, skewed unimodal, rotated sigmoid, and reverse J-shaped distributions. The variation in structural attributes among old-growth stands, particularly the abundance of downed CWD, was closely related to disturbance history. In particular, old-growth stands experiencing moderate levels of canopy disturbance during the last century (1930s and 1980s) had greater accumulations of CWD, highlighting the importance of gap-scale disturbances in shaping the long-term development and structural characteristics of old-growth forests. These findings are important for the development of natural disturbance-based silvicultural systems that may be used to restore important forest characteristics lacking in New England second-growth stands by integrating structural legacies of disturbance (e.g., downed CWD) and resultant tree-size distribution patterns. This silvicultural approach would emulate the often episodic nature of CWD recruitment within old-growth forests.     

How regulations impact innovative environmental technologies: A recent case study

The White House Conference on Environmental Technology, held December 12–14, 1994, is the most recent of many events building toward a national environmental technology strategy, which President Clinton will announce on April 22, 1995, the 25th anniversary of Earth Day. Promoting innovation and eliminating barriers to new environmental technologies are important issues in developing this strategy. Anticipating these developments, EPA launched its own Technology Innovation Strategy in early 1994. EPA's strategy explicitly calls for strengthening incentives for technology innovation within regulatory, policy, and enforcement programs. In this light, it is worthwhile to look at a recent case study showing how regulations impact innovative environmental technologies, particularly because there appears to be a gathering political sentiment for deeper regulatory reform.     

Getting to Grips with Groundwater Pollution Protection in Developing Countries*

Although groundwater is widely and increasingly exploited for potable water-supply in developing countries the threat of groundwater pollution has, as yet, received little attention. Activities currently producing the principal risks are described in some detail. A basis for rapid assessment of the degree of groundwater pollution risk is proposed, based on the evaluation of, and the interaction between, pollutant loading and aquifer vulnerability. Protection zones around individual groundwater supply sources can generally play, at most, only a minor role in overall policy. The strategy proposed is aquifer-oriented and activity-related. The evaluation of aquifer pollution vulnerability, made in the rapid risk assessment and based on three semi-independent criteria, could be used to select the required protection measures in relation to specific land-use activities.     

Algal succession in a Macrocystis pyrifera forest

Algal succession within a subtidal forest of the giant kelp Macrocystis pyrifera was studied by following colonization and community development on concrete blocks fastened to the bottom. Sets of blocks were placed in the bed at 3-month intervals. Subsequent algal development on each set was followed for over a year. All macroscopic species attached to the substrata were noted, and the number and lenght of basal branches determined every 1 to 3 months. Colonizing plants fell into 3 categories: rapid-growing ephemerals, and rapid and slow-growing perennials. Ephemerals such as Giffordia (Ectocarpus) mitchellae, Colpomenia peregrina, and diatom films generally produced and initial bloom on the blocks but were gradually replaced by perennials (articulated corallines, Rhodymenia spp., Gigartina spp.) characteristic of the mature kelp community. These stages, rather than representing “ecological” succession, seemed to reflect differences in growth rate and success in interspecific competition for space and light. Colonization on the blocks varied with season, indicating that most species have either a spring-summer or fall-winter period of maximum reproduction. M. pyrifera sporophyte colonization was greatest in spring. During community development, algal diversity (H), number of species (s) and evenness (J) all reached a peak within 100 to 200 days regardless of the time the blocks were started. Diversity and number of species then fell as ephemeral species disappeared. These species were apparently unable to compete with perennials and, once gone, did not recolonize. Evenness remained high.     

Reproductive effects of tris(4-chlorophenyl)methanol in the rat.

Tris(4-chlorophenyl)methanol (TCPM) is a global contaminant of unknown origin that is structurally related to the endocrine modulating pesticides 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) and Dicofol. Therefore, the potential reproductive toxic effects of TCPM were investigated in sexually mature male Sprague Dawley rats (n = 20) treated with 1.0, 10.0 or 100 ppm of TCPM mixed in the diet for 28 days. The calculated TCPM intake was 0.0, 0.1, 1.2 and 12.4 mg/kg/day, respectively. Serum concentrations of follicle stimulating hormone (FSH) in terminal blood samples were significantly (P < 0.02) elevated in the highest dose group compared to the controls. In contrast, dietary exposure to TCPM had no effect on circulating levels of luteinizing hormone (LH), testosterone (T) and the T/LH ratio. Incubation of MCF-7 cells with increasing concentrations of TCPM failed to either induce proliferation or to block the proliferative effect induced by estradiol indicating that TCPM is neither estrogenic or anti-estrogenic. Relative binding affinity studies using androgen receptors from the prostate revealed that TCPM has a binding affinity comparable to 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (p,p'-DDE), the principle metabolite of DDT. In addition, the calculated Ki (0.62 microM) for TCPM is lower than the reported Ki's for the antiandrogenic pesticides p,p'-DDE and vinclozolin. Although TCPM binds with the androgen receptor in vitro, the absence of both an effect on serum T levels and morphological changes in the testis suggests that the mechanism of action for elevated FSH levels seen in vivo may not involve an antiandrogenic effect of TCPM at the dose level used in this study. The no adverse effect level for reproductive effects of TCPM is 10 ppm which is equivalent to a calculated intake of 1.2 mg/kg/day.     

Comparisons of the dust/smoke particulate that settled inside the surrounding buildings and outside on the streets of southern New York City after the collapse of the World Trade Center, September 11, 2001

The collapse of the World Trade Center (WTC) on September 11, 2001, generated large amounts of dust and smoke that settled in the surrounding indoor and outdoor environments in southern Manhattan. Sixteen dust samples were collected from undisturbed locations inside two uncleaned buildings that were adjacent to Ground Zero. These samples were analyzed for morphology, metals, and organic compounds, and the results were compared with the previously reported outdoor WTC dust/smoke results. We also analyzed seven additional dust samples provided by residents in the local neighborhoods. The morphologic analyses showed that the indoor WTC dust/smoke samples were similar to the outdoor WTC dust/smoke samples in composition and characteristics but with more than 50% mass in the <53-microm size fraction. This was in contrast to the outdoor samples that contained >50% of mass above >53 microm. Elemental analyses also showed the similarities, but at lower concentrations. Organic compounds present in the outdoor samples were also detected in the indoor samples. Conversely, the resident-provided convenience dust samples were different from either the WTC indoor or outdoor samples in composition and pH, indicating that they were not WTC-affected locations. In summary, the indoor dust/smoke was similar in concentration to the outdoor dust/smoke but had a greater percentage of mass <53 microm in diameter.