Cleaning of water contaminated by heavy metals using beetroot fibers as biofilter

We report for the first time the use of beetroot fibers to eliminate heavy metals from polluted water. This biomass is used to remove lead, copper and zinc ions. The kinetics and beetroot fibers fixation capacities of lead, zinc and copper according to various physico‐chemical parameters such as pH, and the concentration of metal solutions were studied. The experiments were carried out in a laboratory column with fixed bed. For kinetic studies, samples of metal solutions were taken at regular intervals and measured by atomic absorption spectrometry. pH at 6.6 shows a maximum retention of the above cited metals by beetroot fibers (98%, 92%, 90% respectively). Quantity of cations retained by this biomass in simple and mixture solution is respectively estimated to be 23.6, 14.02 and 14.64 mg/g. Results indicate the usefulness of this biomass in the remediation of water contaminated by heavy metals by a rapid, practical and efficient method.     

A quantum cascade laser infrared spectrometer for CO2 stable isotope analysis: Field implementation at a hydrocarbon contaminated site under bio-remediation

Real-time methods to monitor stable isotope ratios of CO_2 are needed to identify biogeochemical origins of CO_2 emissions from the soil–air interface. An isotope ratio infra-red spectrometer(IRIS) has been developed to measure CO_2 mixing ratio with δ~13C isotopic signature, in addition to mixing ratios of other greenhouse gases(CH_4, N2_O). The original aspects of the instrument as well as its precision and accuracy for the determination of the isotopic signature δ~13C of CO_2 are discussed. A first application to biodegradation of hydrocarbons is presented, tested on a hydrocarbon contaminated site under aerobic bio-treatment. CO_2 flux measurements using closed chamber method is combined with the determination of the isotopic signature δ~13C of the CO_2 emission to propose a non-intrusive method to monitor in situ biodegradation of hydrocarbons. In the contaminated area, high CO_2 emissions have been measured with an isotopic signature δ~13C suggesting that CO_2 comes from petroleum hydrocarbon biodegradation.This first field implementation shows that rapid and accurate measurement of isotopic signature of CO_2 emissions is particularly useful in assessing the contribution of contaminant degradation to the measured CO_2 efflux and is promising as a monitoring tool for aerobic bio-treatment.     

Numerical simulation of benzene transport in shoreline groundwater affected by tides under different conditions

● An approach for assessing the transport of benzene on the beach was proposed. ● The behavior of benzene in the subsurface of the beach was impacted by tide. ● Tidal amplitude influenced the travel speed and the benzene biodegradation. ● Hydraulic conductivity had the impact on plume residence time and biodegradation. ● Plume dispersed and concentration decreased due to high longitudinal dispersivity. The release and transport of benzene in coastal aquifers were investigated in the present study. Numerical simulations were implemented using the SEAM3D, coupled with GMS, to study the behavior of benzene in the subsurface of tidally influenced beaches. The transport and fate of the benzene plume were simulated, considering advection, dispersion, sorption, biodegradation, and dissolution on the beach. Different tide amplitudes, aquifer characteristics, and pollutant release locations were studied. It was found that the tide amplitude, hydraulic conductivity, and longitudinal dispersivity were the primary factors affecting the fate and transport of benzene. The tidal amplitude influenced the transport speed and percentage of biodegradation of benzene plume in the beach. A high tidal range reduced the spreading area and enhanced the rate of benzene biodegradation. Hydraulic conductivity had an impact on plume residence time and the percentage of contaminant biodegradation. Lower hydraulic conductivity induced longer residence time in each beach portion and a higher percentage of biodegradation on the beach. The plume dispersed and the concentration decreased due to high longitudinal dispersivity. The results can be used to support future risk assessment and management for the shorelines impacted by spill and leaking accidents. Modeling the heterogeneous beach aquifer subjected to tides can also be further explored in the future study.     

Fluorescence Verses Radioactivity Labeling for Lab-Scale Investigation of the Fate of Water-Soluble Polymers in Wastewater Treatment Plants

Water-soluble synthetic polymers are extensively used in cosmetics, detergents and paints. Many end up in wastewater and, later on, in wastewater-treatment plants. In order to gain an insight into their fate in such plants, fluorescence and radioactivity labelings were compared using a lab-scale reactor designed to mimic industrial conditions. Two fermentation media were considered, namely a mixture of E402 and E204 micro-organisms and an activated sludge collected from a water-treatment plant located in the south of France. A sample of low molar mass commercial poly(acrylic acid) (PAA) was labeled by radioactivity with tritium and by coupling the 6-aminofluorescein fluorescent dye. Labeled PAA-containing sludges were allowed to ferment. To monitor the fate of the polymers, aliquots of the fermented mixtures were withdrawn at selected times and centrifuged. Liquid and solid phases were analyzed by scintigraphy or UV spectrometry, depending of the labeling techniques. Both techniques led to similar distributions, c.a. 75% in the supernatant and 25% in the solid phase. Distributions remained constant during the biological tests. There was no degradation of the commercial PAA after aqueous size exclusion chromatography (SEC), in agreement with literature. These features showed that fluorescence-labeling can be used instead of the complex and expensive radiolabeling. The validated fluorescence-based method was then applied to a linear poly(acrylic acid) synthesized by ATRP and labeled with 6-aminofluorescein. There was no significant difference between the commercial and the linear poly(acrylic acid)s. In contrast, a linear PAA with 5% of tert-butyl ester repeating units was predominantly found in the solid phase although adsorption or absorption by micro-organisms could not be demonstrated. The method based on fluorescence labeling should be applicable to other water soluble polymers provided that the dye remains attached to the polymer as it was the case for the studied poly(acrylic acid)s.     

Environmental impact of two successive chemical treatments in a small shallow eutrophied lake: Part I. Case of aluminium sulphate

This paper deals with the efficiency and effects of addition of aluminium sulphate on soft water quality of a shallow eutrophic lake. Almost all the controlled variables improved with treatment, especially nutrient concentrations such as soluble reactive phosphorus (SRP) and transparency. However, aluminium sulphate was not added in sufficient quantity to reduce the total phosphorus content. SRP concentration was significantly reduced in the short term. Moreover, external loading of phosphorus was high and not taken into account by the in-lake treatments. Finally, resuspension of sediment (polymictic lake) removed the alum hydroxide layer on the sediment surface, which reduced treatment effectiveness. No significant pH decrease was noted following alum addition. According to bibliographical toxicological data, monomeric aluminium content does not show any toxic effect on aquatic fauna and flora. In spite of low SRP in the water column, the treatment did not prevent appearance of Microcystis sp. colony (> 10 colony per ml) approximately 30 days after alum application.     

Effect of metals on the adsorption and extractability of 14C-phenanthrene in soils

The fate of polycyclic aromatic hydrocarbons (PAHs) in contaminated soils may be affected by several environmental factors including the presence of co-contaminants. This study was conducted in order to assess the effect of metals on (i) the adsorption of 14C-phenanthrene in soils and (ii) its extractability and ability to form non-extractable residues. The first objective was accomplished using batch adsorption experiments with an uncontaminated agricultural soil spiked with the metals Cd, Cu, Pb, and Zn. Adsorption of phenanthrene was significantly higher after the addition of the metals (Kf = 21.48 vs. 8.55) and the desorption less readily reversible when compared to the unspiked soil. The extractability of phenanthrene was assessed with incubation (4 months, laboratory conditions) and microlysimeter experiments (6 months, natural climatic conditions) on three soils spiked with metals. All the soils were labelled with 14C-phenanthrene. The amount of extractable phenanthrene residues was significantly higher when the metals had been added to the soils. Nevertheless, the quantity of non-extractable residues was non-significantly different between the spiked and unspiked soils. The mechanism leading to increased adsorption and extractability of phenanthrene in the presence of metals is still unknown. In perspective, it would be interesting to assess the bioavailability of PAHs in the presence of metals in further experiments.     

Effects of stewardship on protected area effectiveness for coastal birds

Evaluation of protected area effectiveness is critical for conservation of biodiversity. Protected areas that prioritize biodiversity conservation are, optimally, located and managed in ways that support relatively large and stable or increasing wildlife populations. Yet evaluating conservation efficacy remains a challenging endeavor. We used an extensive community science data set, eBird, to evaluate the efficacy of protected areas for birds across the Gulf of Mexico and Atlantic coasts of the United States. We modeled trends (2007–2018) for 12 vulnerable waterbirds that use coastal areas during breeding or wintering. We compared two types of protected areas—sites where conservation organizations implemented active stewardship or management or both to reduce human disturbance (hereafter stewardship sites) and local, state, federal, and private protected areas managed to maintain natural land cover (hereafter protected areas)—as well as unprotected areas. We evaluated differences in trends between stewardship, protected, and unprotected areas across the Gulf and Atlantic coasts as a whole. Similar to a background sample, stewardship was known to occur at stewardship sites, but unknown at protected and unprotected areas. Four of 12 target species—Black Skimmer (Rynchops niger), Brown Pelican (Pelecanus occidentalis), Least Tern (Sternula antillarum), and Piping Plover (Charadrius melodus)—had more positive trends (two to 34 times greater) at stewardship sites than protected areas. Furthermore, five target species showed more positive trends at sites with stewardship programs than unprotected sites during at least one season, whereas seven species showed more positive trends at protected than unprotected areas. No species had more negative trends at stewardship sites than unprotected areas, and two species had more negative trends at protected than unprotected areas. Anthropogenic disturbance is a serious threat to coastal birds, and our findings demonstrate that stewardship to reduce its negative impacts helps ensure conservation of vulnerable waterbirds.     

Metallothionein induction, antioxidative responses, glycogen and growth changes in Tubifex tubifex (Oligochaete) exposed to the fungicide, fenhexamid

Laboratory studies were conducted to determine the effects of different concentrations of fenhexamid (0.1, 1, and 10 mg L(-1)) on growth, oxidative stress, protein, glycogen, and metallothionein (MT) contents in Tubifex tubifex after an exposure of 2, 4, and 7 days. In addition, residues of the fungicide were followed in water and in the worms. In water, fenhexamid concentration decreased slowly (maximum -2 +/- 0.03% after 2 days for 1 mg L(-1)). In the worms, it increased after 4 days and decreased thereafter, confirming that the worms were exposed to the fungicide and not to a degradation product. LC50 values were between 95.22 +/- 5.36 and 32.11 +/- 1.8 mg L(-1) depending on exposure time. Exposure to fenhexamid had a negative effect on T. tubifex growth (maximum effect -12.2 +/- 0.8% after 7 days with 10 mg L(-1)) demonstrating the toxic effect of the pesticide. This growth rate decrease was accompanied by a reduction in protein and glycogen contents. The activity of catalase (CAT), and glutathione reductase (GR) increased in response to the fungicide demonstrating an oxidative stress in the worms. In contrast glutathion-S-transferase activity (GST) decreased. Exposure to fenhexamid also induced synthesis of MT (maximum +78 +/- 8% after 2 days for 10 mg L(-1)). The specificity of MT concentration increase in response to metals is discussed.