Mating with a kin decreases female remating interval: a possible example of inbreeding avoidance

Inbreeding depression is a relative decline in fitness in offspring of related parents. The magnitude of inbreeding costs varies among taxa and may increase under stressful conditions. Inbreeding tolerance is expected to be low and selection for inbreeding avoidance intense when both sexes invest substantially in shared offspring like in nuptial gift-giving butterflies. This is especially true for increasing mating rate for inbreeding avoidance as nuptial feeding decreases net costs of mating for females. We explored implications of inbreeding in the nuptial gift-giving green-veined white butterfly, Pieris napi. Compared to outbred ones, partially inbred (F = 0.25) eggs and neonate larvae had 25% lower hatching success and 30% lower survival until adult eclosion, respectively. Inbreeding was also associated with small size. Yet, the magnitude of inbreeding depression was independent of larval conditions. A lack of assortative mating and mating durations independent of mating type suggest that neither females nor males discriminate close relatives (r = 0.5) as mates. Indicative of a postcopulatory mechanism to avoid inbreeding, female remating intervals decreased following incestuous matings. Such a plastic response may affect the level of postcopulatory sexual selection as female remating interval (time between successive matings) is necessarily negatively correlated with mating rate (matings per unit time) and mating frequency (lifetime number of matings), and precopulatory mate choice appeared insignificant. Moreover, incest-induced shift in the phenotype towards the adaptive peak may contribute to the evolution of female mating rates, although alternative explanations for polyandry besides material benefits have rarely been invoked when nuptial feeding is involved.     

The biodegradation of lactic acid-based poly(ester-urethanes)

The biodegradability of lactic acid based poly(ester-urethanes) was studied using the headspace test method, which was performed at several elevated temperatures. The poly(ester-urethanes) were prepared using a straight two-step lactic acid polymerization process. The lactic acid is first condensation polymerized to a low molecular weight hydroxyl-terminated telechelic prepolymer and then the molecular weight is increased with a chain extender such as diisocyanate. In the biodegradation studies the effect of different stereostructures (different amounts of D-units in the polymer chain), the length of ester units, and the effect of crosslinking on the biodegradation rate were studied. The results indicate that poly(ester-urethanes) do not biodegrade at 25‡C, but at elevated temperatures they biodegrade well. The different stereostructures and crosslinking have a strong influence on the biodegradation rate. The length of ester units in the polymer chain also affects the biodegradation rate, but much less than crosslinking and stereostructure.     

Ozone-induced changes in the chloroplast structure of conifer needles, and their use in ozone diagnostics

Ozone induces characteristic symptoms in the chloroplasts of the needles of several coniferous species. Chloroplasts are (1) reduced in size and (2) the stroma is electron dense. Moreover, (3) these chloroplast alterations are more pronounced in the outer mesophyll cell layers and in the upper side of the needle compared to the inner layers and lower side. The syndrome, including the three symptoms (1)-(3), is found in the green needles of Scots pine and Norway spruce not only in the experimental fumigations, but also in mature trees in the field, and has potential for diagnosis of ozone stress. For sound ozone diagnostics all three symptoms must be present in the samples studied. The symptoms in relation to needle anatomy and physiology is discussed, and recommendations for sampling and analysis are given.     

Detailed PCB congener patterns in incinerator flue gas and commercial PCB formulations (Kanechlor)

In this study, we determined the detailed PCB congener patterns in flue gases from eight incinerators and four commercial PCB formulations (Kanechlors). About 160 PCB peaks were identified in samples using a DB-5 column and HRGC/HRMS. The concentration of incinerator stack emission gas ranged from 0.02 to 44 ngWHO-TEQ/Nm3. The ratios of dioxin-like PCBs in the total PCB concentration were from 3.4% to 25.7% and from 0.63% to 9.1% in stack emission gases and Kanechlor samples, respectively. The PCB congener profiles of Kanechlor samples were similar to those of previous studies. To determine characteristic congeners in flue gas and Kanechlor samples, principal component analysis (PCA) of the data was conducted using STATISTICA for Windows 5.0J (StatSoft, Inc.). As a result, we obtained four principal components (PCs) and accounted for 74% of the total variance. PC 1 was interpreted combustion, PC 2 and PC 3 were interpreted the difference in the number of substituted chlorines and, PC 4 could not be determined. Moreover, we obtained three groups according to the PCB congeners pattern among samples by PCA. These specific congeners that represent characteristics of each class were identified. These data will be useful for the source analysis of PCBs in the environment.     

Personal exposures and microenvironmental concentrations of particles and bioaerosols

The aim of this study was to compare the personal exposure to particles and bioaerosols with that measured by stationary samplers in the main microenvironments, i.e., the home and the workplace. A random sample of 81 elementary school teachers was selected from the 823 teachers working for two councils in eastern Finland for the winter time measurement period. Bioaerosol and other particles were collected on filters by button samplers using personal sampling and microenvironmental measurements in homes and workplaces. The 24-hour sampling period was repeated twice for each teacher. Particle mass, absorption coefficient of the filter and the concentration of viable and total microorganisms were analyzed from each filter. In this paper, the study design, quality assurance principles and results of particle and bioaerosol exposure are described. The results show that particle mass concentrations, absorption coefficient and fungi were higher in personal exposure samples than in home and workplace samples. Furthermore, these concentrations were usually lower in the home than in the workplace. Bacterial concentrations were highest in heavily populated workplaces, while the viable fungi concentrations were lowest in workplaces. The fungi and bacteria results showed high variation, which emphasises the importance of quality assurance (duplicates and field blanks) in the microbial field measurements. Our results indicate that personal exposure measurements of bioaerosols in indoor environments are feasible and supplement the information obtained by stationary samplers.     

Suspended particulate matter determines physical speciation of Fe,Mn, and trace metals in surface waters of Loire watershed

This study investigates the spatiotemporal variability of major and trace elements, dissolved organic carbon (DOC), total dissolved solids (TDS), and suspended particulate matter (SPM) in surface waters of several hydrosystems of the Loire River watershed in France. In particular, this study aims to delineate the impact of the abovementioned water physicochemical parameters on natural iron and manganese physical speciation (homoaggregation/heteroaggregation) among fine colloidal and dissolved (<?10 nm), colloidal (10–450 nm) and particulate (>?450 nm) phases in Loire River watershed. Results show that the chemistry of the Loire River watershed is controlled by two end members: magmatic and metamorphic petrographic context on the upper part of the watershed; and sedimentary rocks for the middle and low part of the Loire. The percentage of particulate Fe and Mn increased downstream concurrent with the increase in SPM and major cations concentration, whereas the percentage of colloidal Fe and Mn decreased downstream. Transmission electron microscopy analyses of the colloidal and particulate fractions (from the non-filtered water sample) revealed that heteroaggregation of Fe and Mn rich natural nanoparticles and natural organic matter to the particulate phase is the dominant mechanism. The heteroaggregation controls the partitioning of Fe and Mn in the different fractions, potentially due to the increase in the ionic strength, and divalent cations concentration downstream, and SPM concentration. These findings imply that SPM concentration plays an important role in controlling the fate and behavior of Fe and Mn in various sized fractions.

Physical speciation by heteroaggregation of (Fe-Mn) compounds: high [SPM]?→?[Fe-Mn] particulate faction; low {SPM]?→?[Fe-Mn] colloid-dissolved fraction.

     

Prenatal activity of a fetus with early-onset,severe spinal muscular atrophy

A case of early-onset, severe spinal muscular atrophy is reported. Normal fetal breathing movement patterns and heart rate accelerations were observed in spite of the severe hypotonia evident at birth.     

Nodularin concentrations in Baltic Sea zooplankton and fish during a cyanobacterial bloom

Toxic cyanobacterial blooms, dominated by Nodularia spumigena, are a recurrent phenomenon in the Baltic Sea during late summer. Nodularin, a potent hepatotoxin, has been previously observed to accumulate on different trophic levels, in zooplankton, mysid shrimps, fish as well as benthic organisms, even in waterfowl. While the largest concentrations of nodularin have been measured from the benthic organisms and the food web originating from them, the concentrations in the pelagic organisms are not negligible. The observations on concentrations in zooplankton and planktivorous fish are sporadic, however. A field study in the Gulf of Finland, northern Baltic Sea, was conducted during cyanobacterial bloom season where zooplankton (copepod Eurytemora affinis, cladoceran Pleopsis polyphemoides) and fish (herring, sprat, three-spined stickleback) samples for toxin analyses were collected from the same sampling areas, concurrently with phytoplankton community samples. N. spumigena was most abundant in the eastern Gulf of Finland. In this same sampling area, cladoceran P. polyphemoides contained more nodularin than in the other areas, suggesting that this species has a low capacity to avoid cyanobacterial exposure when the abundance of cyanobacterial filaments is high. In copepod E. affinis nodularin concentrations were high in all of the sampling areas, irrespective of the N. spumigena cell numbers. Furthermore, nodularin concentrations in herring samples were highest in the eastern Gulf of Finland. Three-spined stickleback contained the highest concentrations of nodularin of all the three fish species included in this study, probably because it prefers upper water layers where also the risk of nodularin accumulation in zooplankton is the highest. No linear relationship was found between N. spumigena abundance and nodularin concentration in zooplankton and fish, but in the eastern area where the most dense surface-floating bloom was observed, the nodularin concentrations in zooplankton were high. The maximum concentrations in zooplankton and fish samples in this study were higher than measured before, suggesting that the temporal variation of nodularin concentrations in pelagic communities can be large, and vary from negligible to potentially harmful.     

Isolation and identification of fungi tolerant to polycyclic aromatic hydrocarbons and coal tar from different habitats in Lithuania

A group of 36 fungal strains, belonging to the Lithuanian mycobiota, was collected and isolated from different locations, habitats, and matrices, including creosote-treated wood in storage yards for crosstie wastes. The eight most perspective strains selected according to preliminary assessment of tolerance to coal tar were subsequently identified combining taxonomical evaluation and molecular techniques. The tolerance of the eight identified fungal species (five basidiomycetes and three ascomycetes) to the presence of various concentrations of coal tar, and for the four most perspective fungal strains (Pleurotus sp., Schizophyllum sp., Irpex lacteus, Bjerkandera adusta) to polycyclic aromatic hydrocarbons was evaluated. The ligninolytic enzymatic activity assay of the isolated strains resulted in a good correspondence between the tolerance to pollutants and the capability to produce ligninolytic enzymes indicating that this group of white-rot fungi is perspective for further investigation and eventual usage for mycoremediation of polycyclic aromatic hydrocarbons polluted substrates.