Rapid and Low-Cost Method for Evaluation of Nutrient Release from Controlled-Release Fertilizers Using Electrical Conductivity

Methods to determine nutrient release rates of coated fertilizers usually rely on chemical analyses, which often are time-consuming and/or expensive. Our goal was to develop an innovative and rapid low-cost method to evaluate nutrient release from polymer coated MAP or urea using conductometry. The release in water is determined by measuring the electric conductivity (EC) over time, with intervals dependent on release rates. In the case of soluble salt fertilizers, EC can be immediately determined and converted to a concentration using a calibration curve. In the case of urea, an additional step is needed to convert the neutral urea into ammonium. The release rates in water were assessed for a range of commercial and laboratory-coated fertilizers. A validation test demonstrated strong agreement with the release determined using analytical techniques. The EC method hence offers an easy way to quickly evaluate the time course of release of nutrients from controlled-release fertilizers.     

Manure management effects on grass production, nutritive content, and soil nitrogen for a grass silage-based dairy farm

Legislation in the United States has recently focused on improving water quality by establishing management practices that limit the quantities of nutrients entering the water supply. Timely application and quantification of the amount of manure applied throughout the grass-growing season can reduce the loss of nutrients into ground or surface water while improving the quality and quantity of grass harvested. During the 2001 and 2002 growing seasons, we measured the effects of different manure application rates on grass yields, grass nutritive value, and soil chemistry on a dairy farm. On-farm estimates of manure N were combined with yield estimates and forage quality measures to evaluate the effects of varying levels of manure application. Yield estimates, N content of grass, and the amount of N in soil and manure were monitored at each cutting for plots amended at different manure application rates. There are three major outcomes of this evaluation: (i) new grass seedings were at higher risk of elevated levels of nitrate N in forage; (ii) increased forage nitrate N at harvest was associated with malfermented silage and increased levels of ammonia N, which resulted in less efficient use of metabolizable protein for milk production; and (iii) increased understanding of N cycling between manure, soil, and plant provided an opportunity to reduce purchased fertilizer.     

Family Forest Landowners’ Interest in Forest Carbon Offset Programs: Focus Group Findings from the Lake States,USA

In 2012, focus groups were organized with individuals owning 20+ acres in the Lake States region of the United States (Michigan, Minnesota, and Wisconsin) to discuss various issues related to forest carbon offsetting. Focus group participants consisted of landowners who had responded to an earlier mail-back survey (2010) on forest carbon offsets. Two focus groups were held per state with an average of eight participants each (49 total). While landowner participant types varied, overall convergence was reached on several key issues. In general, discussion results found that the current payment amounts offered for carbon credits are not likely, on their own, to encourage participation in carbon markets. Landowners are most interested in other benefits they can attain through carbon management (e.g., improved stand species mix, wildlife, and trails). Interestingly, landowner perceptions about the condition of their own forest land were most indicative of prospective interest in carbon management. Landowners who felt that their forest was currently in poor condition, or did not meet their forest ownership objectives, were most interested in participating. While the initial survey sought landowner opinions about carbon markets, a majority of focus group participants expressed interest in general carbon management as a means to achieve reduced property taxes.     

Environmental Assessment Framework for Policy Applications: Life Cycle Assessment,External Costs and Multi-criteria Analysis

The paper presents a framework for the analysis of external costs of environmental burdens, namely an impact pathway analysis, often coupled with the inventory stage of life cycle assessment (LCA). The ground rule is: quantify as much as possible in terms of burdens (pollutant emissions, etc.), impacts, and their monetary equivalent, then use multi-criteria analysis (MCA) for any remaining impacts that are considered to be too uncertain or defy quantification through to monetization. Although MCA could be used directly on estimates of burdens or impacts, monetary valuation provides a mechanism for consistent weighting of impacts categories based on assessment of public preference. Further advantages of extending LCA through detailed impact assessment combined with monetary valuation are that it greatly simplifies MCA by combining a large number of different environmental impact categories, thereby avoiding an unmanageably large number of criteria, and also facilitates cost benefit analysis (CBA). The risks are noted of inappropriate use of the tools or interpretation/use of the results, and recommendations are made for improved practice. These points are illustrated with examples. The key messages are: (1) that policies should be targeted correctly to give a clear signal which source of a burden should be reduced by how much; (2) that analysts should take into account the needs of policy makers and the link between the analysis and possible policy applications; and (3) that current LCA practice gives limited guidance in both areas, largely through a lack of consideration of the relative and absolute importance of different types of impact. However, this is precisely the strength of external costs analysis, particularly when used with MCA.     

Barley, a potential species for initial reclamation of saline composite tailings of oil sands

The oil sands industry in Alberta (Canada) has developed the composite tailings (CT) process to reduce the fluid fine tails resulting from the processing of oil sands. This process uses a chemical coagulant (gypsum or alum) to produce aggregated fines (clay), so they are retained with the coarse sand fraction of the extraction tailings to form CT, from which fines-free water is released relatively quickly compared with untreated tailings. The resulting CT and CT waters are saline-sodic, with Na+, SO4(2-), and Cl- being the dominant ions. When freshly deposited, the CT deposits are too soft for access by reclamation equipment, and the time required for these deposits to remove the water sufficiently to support traffic is uncertain. A greenhouse study was designed to determine the suitability of barley (Hordeum vulgare L.) for reclamation of fresh CT deposits and to evaluate benefits of peat amendments. This study assessed germination, early plant growth, chlorophyll content, and survival of barley growing in alum- and gypsum-treated CT, with and without peat amendment. Ion and trace metal accumulation in the root and shoot tissues of barley was determined. Amendment of CT with peat improved germination, survival, and growth of barley, but did not prevent leaf injury (probably due to Na and Cl- and possibly multiple nutrient deficiency). Field studies will be undertaken to validate our greenhouse results suggesting that barley could be used to improve dewatering of the freshly deposited substrates, reduce soil erosion, and facilitate leaching of ions by root penetration into the substrate.     

Establishment of permit limits for mill effluent

Various governmental regulatory agencies are responsible for establishing regulations on the discharge of chlorinated organic compounds from pulp and paper mills. The procedures for setting permit limits are the basic topic of this article. Different methods of determining permit limits are set forth and discussed in a number of references, including documents of the Environmental Protection Agency. This paper discusses in detail the application of one particular methodology—the lognormal model approach. In this paper we utilize a real data set and include the necessary calculations required to set up permit limits. The basic tenets of the permit process are such that if limits are set too low, operators who are in full regulatory compliance will still be frequently cited, and if limits are set too high, operators who are not in compliance will seldom if ever be cited. Thus there is a great need for these effluent limits to be determined with great care, both to protect the environment receiving the wastewater and the industry producing the wastewater.     

Multi-scale analysis of oxygen demand trends in an urbanizing Oregon watershed, USA

Human alteration of the landscape has an extensive influence on the biogeochemical processes that drive oxygen cycling in streams. We estimated trends from the mid-1990s to 2003, using the seasonal Mann-Kendall's test, for percent saturation dissolved oxygen (DO), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN), and ammonia-nitrogen (NH(3)-N) for 12 sites in the Rock Creek watershed, northwest Oregon, USA. In order to understand the influence of landscape change, scale, and stormwater runoff management on dissolved oxygen trends, we calculated land cover change through aerial photo interpretation at full-basin, local (near sample point) basin, and 100m stream buffer scales, for the years 1994 and 2000. Significant (p < or = 0.05) trends occurred in DO (increasing at five sites), COD (decreasing at seven sites), TKN (decreasing at five sites, increasing at one site), and NH(3)-N (decreasing at one site, increasing at one site). Significant land cover change occurred in agricultural land cover (-8% for the entire basin area) and residential land cover (+10% for the entire basin area) (p < or = 0.05). Correlation results indicated that: (1) forest cover negatively influenced COD at the full basin scale and positively influences NH(3)-N at local scales, (2) residential land cover influenced oxygen demand variables at local scales, (3) agricultural land cover did not influence oxygen demand, (4) local topography negatively influenced TKN and NH(3)-N, and (5) stormwater runoff management infrastructure correlated positively with COD at the local scale. This study indicates that landscape factors influencing DO conditions for the study streams act at multiple scales, suggesting that better knowledge of scale-process interactions can guide watershed managers' decision making in order to maintain improving water quality conditions.     

Evaluation and Improvement of a Dry Deposition Model using SO2 and O3 Measurements over a Mixed Forest

A dry deposition model (RDM) for operational application has beenevaluated and modified in the present study. Field measurements of friction velocity and dry deposition velocity of SO₂ andO₃ over a mixed forest have been used to evaluate RDM. It was found that RDM predicts friction velocities very close to measurements and thus it can predict reasonable aerodynamic resistance. RDM overestimated O₃ deposition during dry nighttime conditions and underestimated both O₃ andSO₂deposition for early morning hours. It could not predict the mean diurnal variation in deposition velocity for either O₃ or SO₂ deposition under wet surface conditions. Modifications have been made for O₃ and SO₂ dry deposition based on the comparison of results and based upon additional published data. Compared to an earlier version of RDM, the modified versionpredicts better results for O₃ and SO₂ dry deposition,especially under rain and dew conditions.     

An evaluation of four key methods for monitoring household waste prevention campaigns in the UK

Household waste prevention in England has been recognised in national strategy as a key component for future sustainable practice. To support the policy agenda, the Department of Environment, Food and Rural Affairs (Defra) in England has funded an extensive programme of fundamental research in the area. The specific research aim reported on here, in this Defra funded project, was to trial and assess methods for monitoring and evaluating approaches detailed in the National Resource and Waste Forum (NRWF)’s Household Waste Prevention Toolkit. The methods that formed the basis for the four research Objectives for the project were: using pilot and control areas (core Objective), tracking waste arisings, measuring specific activities and declared awareness and behaviour surveys. A primary objective of this research was to quantify the direct waste tonnage impacts of implementing a targeted household waste campaign in Dorset County, UK. A key performance indicator chosen for this assessment was the weight of waste collected at the kerbside from households. In an area where a waste prevention campaign is well planned and implemented then reductions in household waste arisings in pilot areas can be in the region of 2% per annum. This method for monitoring can be used, in the hands of an expert project team, to communicate to the public the direct benefits of waste prevention. It was found that there are a wide range of factors that need to be taken into account in the UK, and that these had hitherto been given little prominence, such as careful matching of pilot and control areas – this proved problematical in this research. However, a range of techniques used to support the methods, e.g. doorstepping surveys and focus groups could not show clear attributable waste prevention impacts but their findings could be used to direct new future messages to the public. The most successful and measurable campaign activities that were revealed by evaluation were: mail preference registrations, Home composting and doorstepping. An expert evaluation of all major methods found that no clear preference was revealed as to which were the most useful. None of the methods were judged very poor neither very good, all had major issues about their use. Tracking waste arisings and focus groups were assessed to be the best techniques in terms of input effort to output value. It is likely that waste prevention teams for household waste will need very careful training in the cost-effective use of the NRWF Toolkit before they are competent to apply it to a given place; the issues are more complex than were first thought.