苯并(a)芘神经毒性研究进展

苯并(a)芘(BaP)是一种广泛存在于环境中的多环芳烃,具有致癌、致畸、致突变性。目前BaP的神经毒性研究零散而不深入,本文主要总结分析了BaP的神经毒性表现,简要介绍了BaP诱发神经毒性呈现的剂量-效应关系,进一步系统阐述了目前研究中发现的可能分子机制,包括BaP诱导神经递质及其代谢物含量的改变,相关DNA及蛋白质的损伤,抗氧化系统及线粒体的改变等,以期为进一步研究提供参考。     

Characteristics of the stabilized/solidified municipal solid wastes incineration fly ash and the leaching behavior of Cr and Pb

Fly ash is a hazardous byproduct of municipal solid wastes incineration (MSWI). An alkali activated blast furnace slag-based cementitious material was used to stabilize/solidify the fly ash at experimental level. The characteristics of the stabilized/solidified fly ash, including metal leachability, mineralogical characteristics and the distributions of metals in matrices, were tested by toxic characteristic leaching procedure (TCLP), X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive spectrometer (SEM-EDS) respectively. Continuous acid extraction was utilized to extract metal ions and characterize their leaching behavior. The stabilization/solidification procedure for MSWI fly ash demonstrates a strong fixing capacity for the metals by the formation of C-S-H phase, hydrated calcium aluminosilicate and ettringite. The stabilized/solidified fly ash shows a dense and homogeneous microstructure. Cr is mainly solidified in hydrated calcium aluminosilicate, C-S-H and ettringite phase through physical encapsulation, precipitation, adsorption or substitution mechanisms, and Pb is mainly solidified in C-S-H phase and absorbed in the Si-O structure.     

Removal of elemental mercury by KI-impregnated clay

This study described the use of clay impregnated by KI in gas phase elemental mercury (Hg^o) removal in flue gas. The effects of KI loading, temperature, O₂, SO₂ and H₂O on Hg^o removal were investigated using a fixed bed reactor. The Hg^o removal efficiency of KI-clay with 3% KI loading could maintain at a high level (approximately 80 %) after 3 h. The KI-clay demonstrated to be a potential adsorbent for Hg^o removal when compared with activated carbon based adsorbent. O₂ was found to be an important factor in improving the Hg^o removal. O₂ was demonstrated to assist the transfer of KI to I₂ on the surface of KI-clay, which could react with Hg^o directly. NO and SO₂ could slightly improve Hg^o removal, while H₂O inhibited it greatly. The results indicated that after adsorption, most of the mercury escaped from the surface again. Some of the mercury may have been oxidized as it left the surface. The results demonstrated that the chemical reaction primarily occurred between KI and mercury on the surface of the KI-clay.     

Wastewater-nitrogen removal using polylactic acid/starch as carbon source: Optimization of operating parameters using response surface methodology

The use of PLA/starch blends for nitrogen removal was achieved. The influence of different operating parameters on responses was verified using RSM. The conditions for desired responses were successfully optimized simultaneously. Blends material may have a promising application prospect in the future. Nitrogen removal from ammonium-containing wastewater was conducted using polylactic acid (PLA)/starch blends as carbon source and carrier for functional bacteria. The exclusive and interactive influences of operating parameters (i.e., temperature, pH, stirring rate, and PLA-to-starch ratio (PLA proportion)) on nitrification (Y₁), denitrification (Y₂), and COD release rates (Y₃) were investigated through response surface methodology. Experimental results indicated that nitrogen removal could be successfully achieved in the PLA/starch blends through simultaneous nitrification and denitrification. The carbon release rate of the blends was controllable. The sensitivity of Y₁, Y₂, and Y₃ to different operating parameters also differed. The sequence for each response was as follows: for Y₁, pH>stirring rate>PLA proportion>temperature; for Y₂, pH>PLA proportion>temperature>stirring rate; and for Y₃, stirring rate>pH>PLA proportion>temperature. In this study, the following optimum conditions were observed: temperature, 32.0°C; pH 7.7; stirring rate, 200.0 r·min^-1; and PLA proportion, 0.4. Under these conditions, Y₁, Y₂, and Y₃ were 134.0 μg-N·g-blend^-1·h^-1, 160.9 μg-N·g-blend^-1·h^-1, and 7.6 × 10³ μg-O·g-blend^-1·h^-1, respectively. These results suggested that the PLA/starch blends may be an ideal packing material for nitrogen removal.     

Improving simulations of sulfate aerosols during winter haze over Northern China: the impacts of heterogeneous oxidation by NO<Subscript>2</Subscript>

We implemented the online coupled WRF-Chem model to reproduce the 2013 January haze event in North China, and evaluated simulated meteorological and chemical fields using multiple observations. The comparisons suggest that temperature and relative humidity (RH) were simulated well (mean biases are–0.2K and 2.7%, respectively), but wind speeds were overestimated (mean bias is 0.5 m?s^–1). At the Beijing station, sulfur dioxide (SO₂) concentrations were overpredicted and sulfate concentrations were largely underpredicted, which may result from uncertainties in SO₂ emissions and missing heterogeneous oxidation in current model. We conducted three parallel experiments to examine the impacts of doubling SO₂ emissions and incorporating heterogeneous oxidation of dissolved SO₂ by nitrogen dioxide (NO₂) on sulfate formation during winter haze. The results suggest that doubling SO₂ emissions do not significantly affect sulfate concentrations, but adding heterogeneous oxidation of dissolved SO₂ by NO₂ substantially improve simulations of sulfate and other inorganic aerosols. Although the enhanced SO₂ to sulfate conversion in the HetS (heterogeneous oxidation by NO₂) case reduces SO₂ concentrations, it is still largely overestimated by the model, indicating the overestimations of SO₂ concentrations in the North China Plain (NCP) are mostly due to errors in SO₂ emission inventory.

Open image in new window

     

Improving simulations of sulfate aerosols during winter haze over Northern China: the impacts of heterogeneous oxidation by NO2

Incorporating the missing heterogeneous oxidation of S(IV) by NO₂ into the WRF-Chem model. Sulfate production is not sensitive to increase in SO₂ emission. The newly added reaction reproduces sulfate concentrations well during winter haze. We implemented the online coupled WRF-Chem model to reproduce the 2013 January haze event in North China, and evaluated simulated meteorological and chemical fields using multiple observations. The comparisons suggest that temperature and relative humidity (RH) were simulated well (mean biases are -0.2K and 2.7%, respectively), but wind speeds were overestimated (mean bias is 0.5 m?s⁻¹). At the Beijing station, sulfur dioxide (SO₂) concentrations were overpredicted and sulfate concentrations were largely underpredicted, which may result from uncertainties in SO₂ emissions and missing heterogeneous oxidation in current model. We conducted three parallel experiments to examine the impacts of doubling SO₂ emissions and incorporating heterogeneous oxidation of dissolved SO₂ by nitrogen dioxide (NO₂) on sulfate formation during winter haze. The results suggest that doubling SO₂ emissions do not significantly affect sulfate concentrations, but adding heterogeneous oxidation of dissolved SO₂ by NO₂ substantially improve simulations of sulfate and other inorganic aerosols. Although the enhanced SO₂ to sulfate conversion in the HetS (heterogeneous oxidation by NO₂) case reduces SO₂ concentrations, it is still largely overestimated by the model, indicating the overestimations of SO₂ concentrations in the North China Plain (NCP) are mostly due to errors in SO₂ emission inventory.     

Simulation of long-term nutrient removal in a full-scale closed-loop bioreactor for sewage treatment: an example of Bayesian inference

In this study, the performance of nitrogen and phosphorus removal in a full-scale closed-loop bioreactor (oxidation ditch) system was simulated using the ASM2d model. Routine data describing the process for two years were compiled for calibration and validation. To overcome the identifiability problem, the classic Bayesian inference approach was utilized for parameter estimation. The calibrated model could describe the long-term trend of nutrient removal and short-term variations of the process performance, showing that the Bayesian method was a reliable and useful tool for the parameter estimation of the activated sludge models. The anoxic phosphate uptake by polyphosphate accumulating organisms (PAO) contributed 71.2% of the total Poly-P storage, which reveals the dominance of denitrifying phosphorus removal process under the oxygen limiting conditions. It was found that 58.7% of the anoxic Poly-P storage and denitrification by PAO in the reactor was achieved in the aerated compartment, implying that the PAO’s anoxic activity was significantly stimulated by the low dissolved oxygen (DO) level in this compartment due to the oxygen gradient caused by brush aerator.     

废旧塑料浮选分离中气泡黏附行为的影响

塑料浮选作为一种基于表面活性剂的废旧塑料分选技术,是解决废旧塑料环境污染的有效方法. 为深入考察塑料浮选过程中气泡的黏附行为及影响因素,运用高速摄影技术结合气泡黏附时间模型,对比分析纯水中气泡与亲/疏水材料的黏附效果,重点比较不同溶液〔纯水、鼠李糖脂和SDS(十二烷基硫酸钠)溶液〕中气泡与疏水材料的黏附时间变化,并探讨其影响机制. 结果表明:气泡在纯水中只与疏水材料发生黏附,表面活性剂及其浓度对气泡与疏水材料的黏附时间影响显著. 在c(鼠李糖脂)和c(SDS)(二者均为0.03 mmol/L)均较低的溶液中,气泡与疏水材料的黏附时间由纯水中的158 ms分别降至120和140 ms,而二者较高(10.00 mmol/L)时黏附时间分别增至1 134和338 ms. 基于黏附时间模型分析表明,黏附时间是气泡尺寸、接触角、溶液黏度及表面张力等参数的函数,通过控制这些参数可以调控气泡在目标塑料表面的黏附时间,实现浮选效率的优化.      

施工企业HSE信息管理系统的设计与运用

为了进一步规范HSE日常业务管理,充分发挥HSE管理体系的内在作用,本文运用.NET计算机技术,构建了基于B/S架构的施工企业HSE信息管理Web系统。该系统以HSE管理体系为核心,实现统一HSE业务管理及报表工具、信息共享、HSE资料电子归档、数据统计分析、个人安全档案管理等功能。通过实际运用效果来看,HSE信息管理系统在促进HSE信息管理高效化、提升HSE管理水平等方面发挥了重要作用,最后论述了该系统存在的不足与改进建议,并指出融入PDA、物联网和可视化技术将为系统创造更加广阔的发展空间。