Landscape Planning for Agricultural Nonpoint Source Pollution Reduction III: Assessing Phosphorus and Sediment Reduction Potential

Riparian buffers have the potential to improve stream water quality in agricultural landscapes. This potential may vary in response to landscape characteristics such as soils, topography, land use, and human activities, including legacies of historical land management. We built a predictive model to estimate the sediment and phosphorus load reduction that should be achievable following the implementation of riparian buffers; then we estimated load reduction potential for a set of 1598 watersheds (average 54 km²) in Wisconsin. Our results indicate that land cover is generally the most important driver of constituent loads in Wisconsin streams, but its influence varies among pollutants and according to the scale at which it is measured. Physiographic (drainage density) variation also influenced sediment and phosphorus loads. The effect of historical land use on present-day channel erosion and variation in soil texture are the most important sources of phosphorus and sediment that riparian buffers cannot attenuate. However, in most watersheds, a large proportion (approximately 70%) of these pollutants can be eliminated from streams with buffers. Cumulative frequency distributions of load reduction potential indicate that targeting pollution reduction in the highest 10% of Wisconsin watersheds would reduce total phosphorus and sediment loads in the entire state by approximately 20%. These results support our approach of geographically targeting nonpoint source pollution reduction at multiple scales, including the watershed scale.     

中国电子废物处理处置典型地区污染调查及环境、生态和健康风险研究进展

电子废物含有大量的金属、塑料和阻燃剂等物质,如果处理不当,电子废物将向环境排放种类繁多的有毒有害物质,从而产生严重的环境污染问题。近年来,国内外学者对电子废物处理所致的生态环境问题给予了相当的关注,已经开展了不少相关研究,这些研究主要集中在我国的几个电子废物处理处置典型地区。本文对近5年来的相关研究成果进行了系统综述,内容涉及电子废物处理处置过程中产生的主要环境污染物,电子废物处理处置活动所致的土壤、水体和大气的重金属和持久性有机污染物污染以及电子废物处理处置活动对动植物和人体的污染风险等,并提出将来关于电子废物研究中需要关注的问题。     

建设项目竣工环保验收存在的问题及对策建议

随着我国建筑建设的城镇化、现代化进程加快,为提升人民的生活质量带来了保障,由于建筑规模以及项目的增加,加剧了环境问题。在强调低碳经济的现代化社会,应该加强对建筑项目竣工验收工作的环保监测,针对竣工验收不环保的问题采取对策,促进建筑施工的绿色化发展。基于此,本文将针对当前建筑项目环保验收存在的问题展开探讨,并提出相应对策。     

Residues and dissipation of trifloxystrobin and its metabolite in tomatoes and soil

A simple residue analytical method using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) procedure for the determination of trifloxystrobin and its metabolite trifloxystrobin acid (CGA321113) in tomato and soil was developed using high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The limits of detection were 0.0005 mg/kg for trifloxystrobin and 0.001 mg/kg for trifloxystrobin acid, respectively. The average recoveries in tomato and soil ranged from 73–99 % for trifloxystrobin and 75–109 % for trifloxystrobin acid, with relative standard deviations below 15 %. The method was then used to study the dissipation and residues in tomato and soil. The dissipation half-lives of trifloxystrobin in tomato were 2.9 days (Beijing) and 5.4 days (Shandong), while in soil were 1.9 days (Beijing) and 3.0 days (Shandong), respectively. The final results showed that the major residue compound was trifloxystrobin in tomato whereas it was its metabolite, trifloxystrobin acid, in soil. The final residues of total trifloxystrobin (including trifloxystrobin acid) were below the EU maximum residue limit of 0.5 mg kg^?1 in tomato 3 days after the treatment.     

Mechanism of ofloxacin fluorescence quenching and its interaction with sequentially extracted dissolved organic matter from lake sediment of Dianchi,China

The wide use and occurrence of antibiotics in water environments have caused wide concerns. Ofloxacin (OFL) was selected as a target antibiotic, and the interaction between OFL and sequential extracted dissolved organic matter (DOM) from the sediment of Dianchi, a hypertrophic lake in Southwest China, was explored using fluorescence quenching technology. The method of fuorescence quenching was used to characterize the interaction between OFL and sequentially extracted DOM. The result indicated that static and dynamic quenching both existed in the interaction. The interaction in the background water (0.01 mol/L NaCl and 200 mg/L NaN₃) became increasingly weak with the further extraction of DOM. A low non-linear factor N value (0.53～0.63) of Freundlich model was observed, indicating a non-linear interaction between OFL and DOM. Elemental characterization and infrared spectrum analysis showed an enhanced OFL-DOM binding with the decrease in humic acid (HA) polarity. The effect of ion strength was tested in the OFL-DOM interaction to show the impact of usually existing metal ions in water environment on the OFL behavior. The result showed that K⁺ had little influence, but Cu²⁺ had a significant promotion (p?相似文献   

Artificial and enhanced humification of soil organic matter using microwave irradiation

Microwave (MW) irradiation, a less energy-intensive irradiation technique, was employed to promote the changes in physicochemical properties of soil organic matter (SOM). MW was irradiated to forest soils for 10 min. Then, the physical and chemical properties of the SOM were analyzed with UV absorbance spectroscopy, Fourier transform infrared spectroscopy, elemental analysis, and size exclusion chromatography. Also, the SOM was fractionated into biopolymer, fulvic acid, and humic acid, and each fraction was analyzed quantitatively. These analyses revealed that the SOM became more aromatic and nonpolar, highly condensed, and macromolecular organic substances that possess a higher amount of functional groups found in highly humified substances than the original SOM as a result of the MW irradiation. The humification-like alteration of SOM property was attributable to the thermal cracking and to the radical reaction, particularly when the MW was irradiated along with activated carbon under the aerobic condition. The results of this study suggest that the artificial and enhanced property changes of SOM can be accomplished by MW irradiation on an engineering time scale, which can contribute to the successful soil and groundwater remediation practice.     

京杭运河与钱塘江沟通中的几个环境问题

而不可及.这种断头滞水,是造成市区河段严重污染的内在因素.根据航运发展需要,运河-钱塘江沟通工程已于1989年6月完成,它包活从艮山港到三堡新航道5.56km,三千吨级船闸一座和上、下游引航道1.41km.全长6.97km(图1).这是一项有很大经济效益的工程.同时,由于钱塘江水位高、水质好,沟通工程为提高运河水质提供了有利条件,因而工程又有明显的环境效益.然而,沟通工程也存在下面三个主要环境问题,必须研究其可能的影响和控制方法.     

木粉/壳聚糖接枝丙烯酸-丙烯酰胺吸附树脂对二元重金属离子溶液中Pb^2＋的吸附

采用自制木粉/壳聚糖接枝丙烯酸-丙烯酰胺吸附树脂R1、R2、R3对二元金属离子Cu2＋/Pb2＋和Zn2＋/Pb2＋溶液中的吸附性能进行了较系统考察。Pb2＋离子溶液中存在竞争离子Cu2＋、Zn2＋时,随竞争离子浓度增加,3种吸附树脂R1、R2、R3对Pb2＋的吸附量明显下降,而竞争离子吸附量显著增加。二元溶液中各金属离子浓度相同时,3种树脂对竞争离子Cu2＋、Zn2＋的吸附量大于对Pb2＋的吸附量;各溶液中分别加入NaCl及NaNO3、尿素后,对Pb2＋离子的吸附量下降迅速。随吸附树脂用量增加,竞争离子Cu2＋、Zn2＋的吸附量逐渐减小,Pb2＋的吸附量在吸附树脂用量0.10 g/L（Zn2＋/Pb2＋溶液）或0.15 g/L（Cu2＋/Pb2＋溶液）时出现最大值。溶液pH值对树脂吸附性能有显著影响。3.0     

A numerical investigation of fluid-structure coupling of 3 MW wind turbine blades

In this paper, computational modeling is created for 3 MW wind turbine blade using the software Solidworks, and the computations are carried out using Workbench for the fluid–structure interaction of blades due to both the rated and the extreme wind load. The methods developed are applied to the simulation of the NREL Phase VI wind turbine blades, and validation against published data is presented. Moreover, the static structural analysis for wind turbine rotor is performed using Mechanical APDL. The results show that the maximum values of stress reach 458 MPa and 76.9 MPa due to the rated and extreme wind load, respectively, which are lower than 78.3 MPa, the flexural strength of Swancor 2511-A epoxy resin for blade material.     

Demonstration of a high throughput on-board hydrogen generation reactor system using aluminum coil as fuel for a vehicle

A novel on-board hydrogen generation concept using Al coil with NaOH was investigated. The reaction rate was successfully controlled by introducing a pumping system for the NaOH solution. The time for the flow to develop fully was mainly dependent on the solution temperature, and the fastest start time recorded was 60 sec at a solution temperature of 70°C. The maximum H₂ generation rate was 200 L min^–1 with a prototype design of the on-board hydrogen generation system 1/8 times the size of a full-size reactor. The H₂ generation process coupled with the solution pumping system was simulated with three-dimensional fluid dynamic software, and the calculated H₂ flow and temperature rise of the system were validated with experimental data.