Expert views on environmental impacts and their measurementin the forest industry

The paper argues that corporate environmental management should be based on significant environmental aspects that result in significant environmental impacts. The Finnish forest industry has substantially reduced its emissions but, being heavy industry, it still causes significant environmental impacts. This paper presents expert views on environmental impacts and their measurement. They were gathered through semi-structured theme interviews. The most frequently mentioned environmental impacts and significant environmental impacts related to water, energy and air. Positive environmental impacts resulted from recycling, forest industry products and use of energy. Traditional emission measurement was considered a well-measured issue. The target subjects of the measurement and especially environmental impact measurement require improvement. The contribution of this research is concerned with the development of measurement and two issues arising from the research are emphasised. First, environmental impact measurement should be further developed. Second, the measurement of the production chain that is physically outside the boundaries of forest industry mills should also be developed.     

Plant-derived visual signals may protect beetle herbivores from bird predators

Insect herbivores often use chemical signals obtained from their food plants to deter enemies and/or attract sexual partners. Do plant-based visual signals act similarly, i.e., repel consumers' enemies and appeal to potential mates? We explored this question using the pollen-feeding beetle Pygopleurus israelitus (Glaphyridae), a specialized pollinator of Anemone coronaria's chemically defended red-morph flowers. We presented dead beetles, which had fed either on anemones or on cat food, to young domestic chicks on a red (anemone-like) or a green (leaf-like) background. We determined whether the beetles' background color and diet affected the chicks' feeding. Cuticle surface extracts from anemone-fed beetles, but not from cat food-fed beetles, contained a secondary metabolite characteristic of anemones. Latencies to the first picking up and consuming of beetles from green backgrounds were shorter than of beetles from red backgrounds. The picking up order of beetles also indicated that prey from the green background was preferred. The chicks retained this preference when re-tested, 3 days later. Handling times of anemone-fed beetles were longer than of cat food-fed beetles. A previous study showed that glaphyrids improve their mate-finding prospects by orienting to large red anemone flowers. Here, female beetles preferred cat food-fed to anemone-fed males in mate-choice assays, thus anemone-derived chemicals did not increase mating success. Instead, the combined results indicate that A. coronaria's red flowers provide a visual signal that may both deter its herbivore's predators and attract its mates. To our knowledge, this is the first experimental evidence for a potential protective role of plant-derived visual signals for insect herbivores/pollinators.     

Learning disability and leadership: Becoming an effective leader

This study investigates learning disability (LD) as an individual‐differences variable predicting leadership emergence, role occupancy, and effectiveness. We hypothesize that individuals with LD are less likely to occupy leadership roles, and that informal group processes (leadership emergence) will mediate the relationship between LD and leadership role occupancy. We also hypothesized that, among leaders promoted and selected for leadership training, there would be a negative relationship between LD and effective leadership. We first checked for LD in a sample of 1076 soldiers, measuring cognitive ability with a geometric‐analogies test as a control. Some months later, during the soldiers' basic training, we measured leadership emergence. We then identified those who were selected for leadership training, recording, and measuring their effectiveness according to supervisory and peer evaluations. Leadership emergence was found to mediate the negative relationship between LD and leadership role occupancy. There were no significant differences among leaders (n = 308) with and without LD in regard to leadership effectiveness. Copyright © 2013 John Wiley & Sons, Ltd.     

On the enigmatic scent glands of dyspnoan harvestmen (Arachnida,Opiliones): first evidence for the production of volatile secretions

While considerable knowledge on the chemistry of the scent gland secretions from the opilionid suborders Laniatores and Cyphophthalmi has been compiled, it is the Palpatores (Eupnoi and Dyspnoi) where chemical data are scarce. In particular, the Dyspnoi have remained nearly unstudied, mainly due to their reported general reluctance to release secretions as well as to the phenomenon of production of insoluble—and inaccessible—solid secretion. We here show that at least certain nemastomatid Dyspnoi, namely all three species of genus Carinostoma, indeed produce a volatile secretion, comprising octan-3-one, 6-methyl-5-hepten-2-one and acetophenone in species-specific combinations. In all Carinostoma spp., these volatiles are embedded in a semi-volatile, naphthoquinone matrix (mainly 1,4-naphthoquinone and 6-methyl-1,4-naphthoquinone). In detail, acetophenone and traces of naphthoquinones characterize the secretions of Carinostoma carinatum. A mixture of octan-3-one, 6-methyl-5-hepten-2-one and large amounts of naphthoquinones were found in C. elegans, and 6-methyl-5-hepten-2-one together with small amounts of naphthoquinones in the secretions of C. ornatum. So far, exclusively naphthoquinones had been reported from a single dyspnoan hitherto studied, Paranemastoma quadripunctatum.     

Choosing classes for size projection matrix models

Projection matrix models are intensely used in ecology to model the dynamics of structured populations. When dealing with size-structured populations, there is no satisfactory algorithm to partition size into discrete classes. We show that the Vandermeer-Moloney algorithm for choosing classes is inconsistent with the Usher model, and systematically selects the finest classes. Considering that the matrix model is a discrete approximation of a continuous model, we define an approximation error as the sum of a distribution error (the difference between the discrete distribution and its continuous counterpart), and a sample error. The optimal partition of size into classes is the one that minimizes the approximation error. This method for choosing classes also shows that the choice of the class width cannot be disconnected from the choice of the time step. When applied to 520 trees of Dicorynia guianensis in French Guiana, this algorithm identified 8 classes of 11.4 cm in width, which is in agreement with the empirical choice of foresters.     

Analysis of bus collision and non-collision incidents using transit ITS and other archived operations data

Introduction

This paper analyzes factors contributing to bus operations safety incidents at TriMet, the transit provider for the Portland Oregon metropolitan region.

Method

The analysis focuses on 4,631 collision and non-collision incidents that occurred between 2006 and 2009. Empirical analysis of these incidents draws on a wide array of operator-level data recovered by transit ITS technologies in combination with information from TriMet's human resources, scheduling, and customer relations databases. Incident frequencies are estimated in relation to operators' demographic characteristics, employment status, assigned work characteristics, service delivery and performance indicators, temporal factors, and customer information.

Results

Apart from identifying factors that are empirically related to the frequency of safety incidents, the findings offer insights into operations policies and practices that hold promise for improving safety.

Impact on Industry

Potential for safety improvement based on analysis of archived operations and human resource data.     

Mitigating construction safety risks using prevention through design

Introduction

Research and practice have demonstrated that decisions made prior to work at construction sites can influence construction worker safety. However, it has also been argued that most architects and design engineers possess neither the knowledge of construction safety nor the knowledge of construction processes necessary to effectively perform Construction Hazards Prevention through Design (CHPtD).

Method

This paper introduces a quantitative methodology that supports designers by providing a way to evaluate the safety-related performance of residential construction designs using a risk analysis-based approach. The methodology compares the overall safety risk level of various construction designs and ranks the significance of the various safety risks of each of these designs. The methodology also compares the absolute importance of a particular safety risk in various construction designs.

Results

Because the methodology identifies the relevance of each safety risk at a particular site prior to the construction stage, significant risks are highlighted in advance. Thus, a range of measures for mitigating safety risks can then be implemented during on-site construction.

Impact on industry

The methodology is specially worthwhile for designers, who can compare construction techniques and systems during the design phase and determine the corresponding level of safety risk without their creative talents being restricted. By using this methodology, construction companies can improve their on-site safety performance.     

Path forward: Emerging issues and challenges

The NIOSH Construction Program worked with industry stakeholders to develop a National Occupational Safety and Health Construction Agenda to target future research and activities. The Program and its partners are also cognizant that new developments can emerge over time and that research can play an important role in helping to understand and address these emerging issues. Examples of emerging issues relevant to construction safety and health are described. These include: (a) climate change and energy considerations; (b) green construction developments and opportunities; (c) new materials; (d) changes in industry structure and practice; (e) workforce developments and disparities; (f) injury underreporting and cost and risk shifting; and (g) increased interest in addressing root causes. Responding to emerging issues while maintaining a focus on fundamental longstanding issues represents an ongoing challenge for researchers and industry organizations. Additional research to understand the diffusion and adoption of research by the industry is also needed. Research accomplished to date provides a strong foundation for addressing future industry needs and trends.     

What kinds of injuries do OSHA inspections prevent?

Objective

OSHA's enforcement program is one of the major public efforts to protect American workers. We examine both the scope of injury prevention that inspections can contribute and the types of standards that contribute the most.

Methods

We linked Pennsylvania Department of Labor and Industry files for lost-time injuries and employment to calculate injury rates for 1998-2005 for all single-establishment manufacturing firms. We linked these to OSHA inspection records.

Results

Inspections with penalties did affect injury types unrelated to standards as well as those related. We also found again that citations for violations of the standard requiring personal protective equipment had the largest impact on preventing injuries.

Impact on Industry

Programs requiring protective equipment use deserve added attention from consultants and inspectors. In addition, some inspections spur managers to undertake safety measures that go beyond compliance with standards.     

Changes in fall prevention training for apprentice carpenters based on a comprehensive needs assessment

Problem

Falls from heights in residential construction are common, especially among inexperienced workers.

Methods

We conducted a comprehensive needs assessment to determine gaps in the school-based apprentice carpenters' fall prevention training. A team of carpenter instructors and researchers revised the fall prevention training to fill these gaps. Apprentice evaluation and feedback guided ongoing curricular improvements.

Results

Most apprentice carpenters performed work tasks at heights prior to training and fall protection techniques were not commonly used at residential construction sites. Priorities of the revised school-based training included safe ladder habits, truss setting, scaffold use, guarding floor openings, and using personal fall arrest systems. New apprentices were targeted to ensure training prior to exposure at the workplace. We used adult learning principles to emphasize hands-on experiences. A framed portion of a residential construction site was fabricated to practice fall protection behaviors in a realistic setting. The revised curriculum has been delivered consistently and apprentice feedback has been very favorable.

Conclusions

Integration of needs assessment results was invaluable in revising the school-based carpenters apprentice fall prevention curriculum. Working closely with the instructors to tailor learning experiences has provided preliminary positive results.

Impact on Industry

The fall safety of the residential construction industry continues to lag behind commercial construction and industrial settings. The National Occupational Research Agenda includes a Strategic Goal to strengthen and extend the reach of quality training and education in the construction industry via mechanisms such as construction safety and health training needs assessments. This study demonstrates how a structured process can be used to identify and remedy gaps and improve training effectiveness. We encourage others to take steps to assess and increase the impact of training efforts directed at all residential construction professionals; including both union and non-union workers. The implications are even greater in the non-union sector where most U.S. residential work is done.