Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material

3D printing has received lots of attention due to its limitless potential and advantages in comparison to traditional manufacturing processes. This study focuses on the most popular type of home 3D printers, namely fused filament fabrication (FFF) printers, which use plastic filaments as the feedstock. The rather high material cost and large amount of plastic waste generated by FFF 3D printers have driven the need for plastic filaments produced from recycled plastic waste. This study evaluates, in terms of physical characterization, the feasibility of using recycled high-density polyethylene (HDPE), one of the most commonly used plastics, as the feedstock for 3D printers, in comparison with the common acrylonitrile butadiene styrene plastic pellets. In-house extrusion using recycled HDPE pellets and flakes is possible. The diameter consistency and extrusion rate results, along with other physical characterization results, including differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and water absorption, suggest that making filaments from recycled HDPE pellets is a viable option, as the obtained filament has favorable water rejection and comparable extrusion rate and thermal stability. Existing methods for overcoming the warping and adhesion problems in 3D printing with HDPE were also reviewed. In order to increase the market competitiveness of waste-derived filaments, optimization of the extrusion process, studies on the mechanical and aging properties, and development of a standard characterization methodology and database are crucial.     

Implementing single- and multi-year sensitivity analyses to propose several feasible solutions for meeting the electricity demand in large-scale tourism sectors applying renewable systems

Environment, Development and Sustainability - The tourism sectors consume a high amount of electrical power, which in most cases is supplied by the electrical grid and diesel generator. As a...     

Positive environmental effects of the coronavirus 2020 episode: a review

Environment, Development and Sustainability - The outbreak of COVID-19 has made a global catastrophic situation that caused 1,039,406 deaths out of 35,347,404 infections, and it will also cause...     

Impact of international lobby groups on international environmental agreements

Environmental Economics and Policy Studies - Economists have long argued over the political economy of tradable emission permits, especially the political pressure of lobby groups on international...     

Experimental investigation and optimization of dimple-roughened impinging jet solar air collector using a novel AHP-MABAC approach

Environmental Science and Pollution Research - The effect of the flow and geometric parameters of a dimple-roughened absorber plate on the enactment of solar air collectors (SACs) with air-impinged...     

Exposure to ionizing radiations and changes in blood cells and interleukin-6 in radiation workers

Environmental Science and Pollution Research - Long-term exposure to ionizing radiation (IR) can cause dire health consequences even less than the dose limits. Previous biomonitoring studies have...     

Size fraction of hazardous particulate matter governing the respiratory deposition and inhalation risk in the highly polluted city Delhi

Environmental Science and Pollution Research - Delhi has been identified as one of the highly polluted cities in the world and recently associated with the highest population weighted PM2.5...     

Analysis of Lead Levels in Local Jordanian and Imported Sheep Meat and Organs Using Atomic Absorption Spectrometry

A total of two hundred and forty random samples were collected equally from mutton, liver and kidney of 40 local (Jordanian) and 40 imported Australian sheep (40 each sub sample). Fresh samples were collected from 12–18 m old sheep slaughtered in abattoirs in Jordan in 2002. Besides, 40 fresh mutton samples of imported Chinese sheep were collected from different markets. Atomic absorption spectrometry (AAS) was used to estimate the lead (Pb) content of the samples. Results indicated that Australian mutton had significantly higher (p < 0.05) mean of lead pollution than that of the local and Chinese muttons. The mean concentration of lead (mg/kg) in Australian, local and Chinese muttons was 4.30, 3.15 and 2.17, respectively. The mean concentration of lead in Australian sheep liver was significantly higher (p < 0.05) than that recorded in the local sheep liver. The mean concentration of Pb in Australian and local sheep liver was 5.69 and 4.52 mg/kg, respectively. The mean concentrations of Pb in the kidney of the Australian and local sheep were not significantly different (p > 0.05). They were 4.59 and 3.87 mg/kg, respectively.On the basis of the samples lead level, 85, 92 and 87.5% of local, Australian and Chinese mutton respectively, exceeded the international safe permissible limit of 1.0 mg/kg. Furthermore, the effect of Pb on animal and human health was discussed.     

Review of pollutants removed by electrocoagulation and electrocoagulation/flotation processes

The word “electrocoagulation” (EC) will be sometimes used with “electroflotation” (EF) and can be considered as the electrocoagulation/flotation (ECF) process. Through the process of electrolysis, coagulating agents such as metal hydroxides are produced. When aluminium electrodes are used, the aluminium dissolves at the anode and hydrogen gas is released at the cathode. The coagulating agent combines with the pollutants to form large size flocs. As the bubbles rise to the top of the tank they adhere to particles suspended in the water and float them to the surface. In fact, a conceptual framework of the overall ECF process is linked to coagulant generation, pollutant aggregation, and pollutant removal by flotation and settling when it has been applied efficiently to various water and wastewater treatment processes. This review paper considers a significant number of common applications of EC and ECF processes which have been published in journal and conference papers.     

A stochastic conflict resolution model for trading pollutant discharge permits in river systems

This paper presents an efficient methodology for developing pollutant discharge permit trading in river systems considering the conflict of interests of involving decision-makers and the stakeholders. In this methodology, a trade-off curve between objectives is developed using a powerful and recently developed multi-objective genetic algorithm technique known as the Nondominated Sorting Genetic Algorithm-II (NSGA-II). The best non-dominated solution on the trade-off curve is defined using the Young conflict resolution theory, which considers the utility functions of decision makers and stakeholders of the system. These utility functions are related to the total treatment cost and a fuzzy risk of violating the water quality standards. The fuzzy risk is evaluated using the Monte Carlo analysis. Finally, an optimization model provides the trading discharge permit policies. The practical utility of the proposed methodology in decision-making is illustrated through a realistic example of the Zarjub River in the northern part of Iran.