Multi-response optimization of Fenton process for applicability assessment in landfill leachate treatment

Fenton process, as a pretreatment method, was found to be effective in the primary treatment of mature/medium landfill leachate. However, the main problem of the process is the large amount of produced sludge that requires an accurate feasibility evaluation for operational applications. In this study, the response surface methodology was applied for the modeling and optimization of Fenton process in three target responses, (1) overall COD removal, (2) sludge to iron ratio (SIR) and (3) organics removal to sludge ratio (ORSR), where the latter two were new self-defined responses for prediction of sludge generation and applicability assessment of the process, respectively. The effective variables included the initial pH, [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage. According to the statistical analysis, all the proposed models were adequate (with adjusted R² of 0.9116–0.9512) and had considerable predictive capability (with prediction R² up to 0.9092 and appropriate adequate precision). It was found that all the variables had significant effects on the responses, specifically by their observed role in dominant oxidation mechanism. The optimum operational conditions obtained by overlay plot, were found to be initial pH of 5.7, [H₂O₂]/[Fe²⁺] ratio of 17.72 and [Fe²⁺] of 195 mM, which led to 69% COD removal, 2.4 (l sludge/consumed mole Fe²⁺) of SIR and 16.5 (gCOD removed/l produced sludge) for ORSR in verification test, in accordance with models-predicted values. Finally, it was observed that [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage had significant influence on COD removal, while Fe²⁺ dosage and [H₂O₂]/[Fe²⁺] ratio had remarkable effects on SIR and ORSR responses, respectively.     

The effects of using reprocessable material on the durability and mechanical properties of landfill leachate collection HDPE pipes

This paper investigated the durability and mechanical properties of landfill leachate collection HDPE pipes which had been made of different weight percent amounts of virgin and reprocessable HDPE compounds (VC and RC). Durability is reported base on the chemical properties, obtained through oxidative induction time (OIT) and melt flow index (MFI) measurements, at the temperature of 50 °C and over a period of 12 months immersion in a synthetic leachate. Mechanical properties are also described according to tensile and pressure tests which had been conducted on the pipes samples. All of the factors were examined had been affected by the addition of RC, but for the special combination the antioxidant depletion was significantly affected by the experimental aging condition and no important changes had been observed in the other pipe properties. The results from OIT tests indicate that the rate of antioxidant depletion is reduced by an increase in the weight percent amounts of RC, during the experimental aging condition. This reduction is probably attributed to the extraction of antioxidants from RC in their recovery process. Finally, although these results are related to the particular HDPE compound, antioxidant formulation and condition examined, but it can be said that the use of clean own reprocessable material for the production of landfill leachate pipes shall be permitted without limitations.     

Evaluation of practicing safety features for hospital waste collection among Iran’s public hospitals

Journal of Material Cycles and Waste Management - Hospital waste management is imperative due to its impending health hazards. This study was meant to evaluate the strong safety awareness of...     

Water Quality Changes in Chini Lake, Pahang, West Malaysia

A study of the water quality changes of Chini Lake was conducted for 12 months, which began in May 2004 and ended in April 2005. Fifteen sampling stations were selected representing the open water body in the lake. A total of 14 water quality parameters were measured and Malaysian Department of Environment Water Quality Index (DOE-WQI) was calculated and classified according to the Interim National Water Quality Standard, Malaysia (INWQS). The physical and chemical variables were temperature, dissolved oxygen (DO), conductivity, pH, total dissolved solid (TDS), turbidity, chlorophyll-a, biochemical oxygen demand (BOD), chemical oxygen demand (COD), total suspended solid (TSS), ammonia-N, nitrate, phosphate and sulphate. Results show that base on Malaysian WQI, the water in Chini Lake is classified as class II, which is suitable for recreational activities and allows body contact. With respect to the Interim National Water Quality Standard (INWQS), temperature was within the normal range, conductivity, TSS, nitrate, sulphate and TDS are categorized under class I. Parameters for DO, pH, turbidity, BOD, COD and ammonia-N are categorized under class II. Comparison with eutrophic status indicates that chlorophyll-a concentration in the lake was in mesotrophic condition. In general water quality in Chini Lake varied temporally and spatially, and the most affected water quality parameters were TSS, turbidity, chlorophyll-a, sulphate, DO, ammonia-N, pH and conductivity.     

Food Insecurity in Pakistan: Causes and Policy Response

There is evidence of continued food insecurity and malnutrition in Pakistan despite significant progress made in terms of food production in recent years. According to “Vision 2030” of the Planning Commission of Pakistan, about half of the population in the country suffers from absolute to moderate malnutrition, with the most vulnerable being children, women, and elderly among the lowest income group. The Government of Pakistan has been taking a series of policy initiatives and strategic measures to combat food insecurity issues. These range from increasing production to food imports, implementation of poverty reduction strategies, nutritional improvement programs, as well as provision of social safety nets. The article aims to instill some fresh thinking into the debate regarding the challenges of food security. It underscores the limitations of hitherto policy response, and suggests crucial measures to improve the present grim scenario. Policy makers, planners, practitioners, and academicians in countries with comparable socio-political and economic setup can view this discussion as a case study and may apply the findings in their domain accordingly.     

Epidemiology of occupational accidents among Iranian insured workers

Work-related accidents are considered as a major health problem worldwide. The aim of present study was to determine the epidemiological pattern of occupational accidents among workers insured by the Iranian Social Security Organization (ISSO) between 2001 and 2005.Subjects consisted of all workers and drivers who had a work-related accident during 2001–2005 and were registered in the Iranian Social Security Organization (ISSO) database according to the inspection reports. An ordinal logistic regression model (proportional odds regression model) was used to assess the concurrent effects of independent variables on accident outcomes.Overall, 86,437 work-related accidents were investigated. The accidents were more frequent in metal workplaces and electrical industries, respectively. More than half of the accidents were due to incautious activities. Workers’ age (age at the time of accident) (OR = 0.99, CI: 0.989–0.994), gender (OR = 1.3, CI: 1.191–1.683), marital status (OR = 1.25, CI: 1.143–1.675) as well as accident setting (OR = 1.88, CI: 1.728–1.975) had significant effect on accident outcomes. Pattern of occupational injuries in Iran was consistent with the global pattern for accident outcomes.     

Decolorization and degradation of acid dye with immobilized titania nanoparticles

This paper addresses the decolorization and degradation of acid dye by a heterogeneous photocatalytic process using immobilized nano-sized TiO₂ particles as the photocatalyst. Sackcloth fiber was used as a support to immobilize the nano-sized TiO₂ photocatalyst. The structural properties of the immobilized photocatalyst were characterized by XRD, SEM and EDX. UV–Vis absorption spectroscopy and the measurement of the chemical oxygen demand (COD) were also used for the process performance studies. The XRD results did not show significant changes in the structure of P25 as a consequence of the immobilization procedure. The formation of titania crystallites in the sackcloth fiber was confirmed by SEM/EDX. The photocatalytic activities of TiO₂-coated sackcloth fiber catalyst were evaluated using Acid Black 26 as a model organic contaminant and using UV-A radiation. Experimental results showed that after 60 min, the degradation of Acid Black 26 with the immobilized TiO₂ particles was higher than that with plain TiO₂. Based on the COD results, after 3 h, the TiO₂-coated sackcloth fiber effectively decomposed all of the organic compounds present in dye solution under the studied experimental conditions. The effects of the oxidant H₂O₂, initial dye concentration and pH on the photocatalytic degradation were also investigated. The presence of CO₃^2? as a dissolved inorganic anion had the highest inhibitory effect on the decolorization of the dye, when compared with the other anions investigated. Kinetics analysis indicates that the photocatalytic decolorization rate of Acid Black 26 can be described by a pseudo-first-order model.     

Conversion of Mixed Low-Density Polyethylene Wastes into Liquid Fuel by Novel CaO/SiO<Subscript>2</Subscript> Catalyst

Plastic wastes disposal can be done by various methods such as landfill, incineration, mechanical and chemical recycling but these are restricted due to some environmental, economic and political problems. Conversion of these plastic wastes into valuable products by degradation is the best option. In the present work waste low density polyethylene was degraded by catalytic process using CaO/SiO₂ as mixed catalyst. The conditions for catalytic degradation were optimized for the production of maximum liquid fuel. It was found that the yield of liquid product was up to 69.10 wt% at optimum condition of temperature (350 °C), time (90 min) and catalyst feed ratio (1:0.4). Liquid fuels obtained from the catalytic degradation were further separated into various fractions by fractional distillation. Composition of liquid fuels was analyzed by FTIR spectroscopy, which showed that the liquid fuels mostly consist of paraffinic and naphthenic hydrocarbons. Different fuel properties such as density, specific gravity, American petroleum institute gravity (API gravity), viscosity, kinematic viscosity, refractive index, refractive intercept and flash point of both the parents and various fractional fuels were determined. All the properties of the obtained fuels are in close agreement with the fuel properties of gasoline, kerosene and diesel. It was found that our catalyst is very much efficient in terms of time, degradation temperature and amount of catalyst.     

Characterizing In Situ Methane‐Enhanced Biostimulation Potential for 1,4‐Dioxane Biodegradation in Groundwater

This study characterizes the 1,4‐dioxane biodegradation potential for an in situ methane‐enhanced biostimulation field pilot study conducted at Air Force Plant 44, located south of the Tucson International Airport in Arizona. In this study, the use of methane as the primary substrate in aerobic cometabolic biodegradation of 1,4‐dioxane is evaluated using environmental molecular diagnostic tools. The findings are compared to an adjacent pilot study, wherein methane was generated via enhanced reductive dechlorination and where methane monooxygenase and methane‐oxidizing bacteria were also found to be abundant. This article also presents the use of ¹³C and ²H isotopic ratio enrichment, a more recent tool, to support the understanding of 1,4‐dioxane biodegradation in situ. This study is the first of its kind, although alkane gas‐enhanced biodegradation of 1,4‐dioxane has been evaluated extensively in microcosm studies and propane‐enhanced biodegradation of 1,4‐dioxane has been previously studied in the field. ©2016 Wiley Periodicals, Inc.     

Modeling carbon sequestration under zero tillage at the regional scale. I. The effect of soil erosion

Zero tillage is recognized as a potential measure to sequester carbon dioxide in soils and to reduce CO₂ emissions from arable lands. An up-scaling approach of the output of the Environmental Policy Integrated Climate (EPIC) model with the information system SLISYS-BW has been used to estimate the CO₂-mitigation potential in the state of Baden-Württemberg (SW-Germany). The state territory of 35,742 km² is subdivided into eight agro-ecological zones (AEZ), which have been further subdivided into a total of 3976 spatial response units. Annual CO₂-mitigation rates where estimated from the changes in soil organic carbon content comparing 30 years simulations under conventional and zero tillage. Special attention was given to the influence of tillage practices on the losses of organic carbon through soil erosion, and consequently on the calculation of CO₂-mitigation rates. Under conventional tillage, mean carbon losses through erosion in the AEZ were estimated to be up to 0.45 Mg C ha⁻¹ a⁻¹. The apparent CO₂-mitigation rate for the conversion from conventional to zero tillage ranges from 0.08 to 1.82 Mg C ha⁻¹ a⁻¹ in the eight AEZ, if the carbon losses through soil erosion are included in the calculations. However, the higher carbon losses under conventional tillage compared to zero tillage are composed of both, losses through enhanced CO₂ emissions, and losses through intensified soil erosion. The adjusted net CO₂-mitigation rates of zero tillage, subtracting the reduced carbon losses through soil erosion, are between 0.07 and 1.27 Mg C ha⁻¹ a⁻¹ and the estimated net mitigation rate for the entire state amounts to 285 Gg C a⁻¹. This equals to 1045 Gg CO₂-equivalents per year with the cropping patterns in the reference year 2000. The results call attention to the necessity to revise those estimation methods for CO₂-mitigation which are exclusively or predominantly based on the measurements of differential changes in total soil organic carbon without taking into account the tillage effects on carbon losses through soil erosion.