Impact of sulphur dioxide exposure on conidial germination of powdery mildew fungi

The impact of sulphur dioxide, in two different concentrations (286 microg m(-3) and 571 microg m(-3)) for various exposure periods, on conidial germination of some powdery mildew fungi was investigated in artificial treatment conditions. SO(2) in general was inhibitory for conidial germination of all the studied powdery mildew fungi and the species did not differ much from each other in their sensitivity to SO(2). The per cent conidial germination was increasingly inhibited with an increase in the concentration of SO(2). The concentration of SO(2) and the exposure period were important determinants of the inhibitory effect.     

Impact of repeated application on the binding and persistence of [14C]-DDT and [14C]-HCH in a tropical soil

An Indian sandy loam soil was initially treated with 1 kg a.i. ha(-1) of either [(14)C]-p,p'-DDT or [(14)C]-gamma-HCH during winter. DDT concentration after 30 days declined to 75.3%, which included 2.1% soil-bound residues. After 150 days, DDT levels further decreased to 42.4% with a concomitant increase in bound residues amounting to 5.9%. Identical treatment with HCH caused the residue levels to be reduced to 67.4 and 23.6%, after 30 and 150 days, respectively. During this period, the soil-bound residues of HCH increased from 5.2 to 12.8%. Repeat application to pre-treated soils in summer and subsequent field exposure for 30 days reduced the concentration of DDT to 52.1% and that of HCH to 42.4% of the total concentration following the second treatment. In parallel control experiments, which received only a single treatment, DDT levels declined to 61.3%, while HCH slumped to 45.3%, indicating a slower dissipation rate than in the corresponding repeated treatments. In repeat experiments, the soil-bound residues of DDT and HCH showed only a 1.07 to 1.08-fold increase in 30 days, as compared to three to ten-times increase in the control experiments. The results amply demonstrate that pre-treatment of tropical soils with DDT or HCH enhances their rate of dissipation and significantly reduce the formation of their soil-bound residues.     

Criteria for the evaluation of dioxins in the environment

In FRG and other countries unequivocal criteria for the limitation of dioxins (PCDD's/PCDF's) in food like vegetables and fruits are lacking. These have to be directly associated with the limitation of dioxins in the soil and the deposition of particulate matter as the two main pathways for plant contamination. Based on recent investigations in the vicinity of cable-waste incinerators in Northrhine-Westphalia with comparatively high contents of dioxins in garden plants and soils and other sources of dioxins, considerations are given for the establishment of the criteria urgently needed.     

A natural analogue of high-pH cement pore waters from the Maqarin area of northern Jordan: Comparison of predicted and observed trace-element chemistry of uranium and selenium

Current design concepts for low-/intermediate-level radioactive waste disposal in many countries involve emplacement underground in a cementitious repository. The highly alkaline groundwaters at Maqarin, Jordan, are a good analogue for the cementitious pore waters that will be present within such a repository. A geochemical modelling study of these groundwaters has been carried out in order to test the applicability of equilibrium models in geochemical programs and their associated thermodynamic databases in such hyperalkaline conditions. This was achieved by comparison of elemental solubilities and speciations predicted by the programs with observations in the natural system. Five organisations took part in the study: AEA Technology, U.K.; Chalmers University of Technology, Sweden; MBT Tecnología Ambiental, Spain; Nagra, Switzerland; and SKB, Sweden. The modelling study was coordinated by the University of Berne.The results of the study showed good agreement between the predictions of the programs employed. Comparison of the observed solids with those predicted by the models has allowed limited validation of the databases. The results for U and Se are presented here.     

Secondary air pollutants

The study has been performed in a supposedly clean-air region of a Northern Finnish forest with a homogeneous stand of Scots pine. Stomatal epicuticular wax layer erosion is described using a classification system of five erosion stages. The percentage of stomatal wax within each erosion stage is calculated and the results are treated statistically, which makes the morphological study of the needle surface semi-quantitative. Severe wax degradation has already been found in the current year, increasing with the age of the needles. In this area, the wax layer erosion is correlated with secondary air pollutants, as analyses have shown high trichloroacetate (TCA) levels in needles from the same trees. The wax layer analyses are in accordance with earlier findings which have demonstrated differences in tolerance to TCA.     

Surfactant solubilization of hydrophobic compounds in soil and water

The soil/water partition coefficient (K_d) of hexachlorobenzene (HCB) ranged from 220 1/kg to 1800 1/kg for eight soils having a wide range of physico-chemical properties. K_d normalised to soil organic carbon (K_oc) was found to be 28000 ± 4800 1/kg. Anionic surfactant dodecylsulphate (DS) present at concentrations above the critical micellar concentration (CMC) caused reductions in the apparent soil/water partition coefficient (K_d ^*) in the range of 3–26 times for most soils and up to 36–91 times for sandy soils. Below CMC, at environmentally relevant surfactant concentrations, K_d ^* was reduced by a factor of 1–13. For clay and calcareous soils significant adsorption/complexation/precipitation of DS occurred. At the lowest DS concentration this produced a two-fold increase in K_d ^*. At increasing DS concentrations this effect was shielded by the solubihzing effect from DS. Monomer (K_mn) and micellar (K_mc) surfactant/water partition coefficients for HCB were determined to be, 980 ± 190 1/kg and 21000 ± 1600 1/kg, respectively.     

Washing as a remediation technology applicable in soils heavily polluted by mining-metallurgical activities

A permanent solution in order to remediate a heavily contaminated soil is washing it utilizing the appropriate reagents. The study presented in this paper deals with the washing of a soil highly polluted by mining and metallurgical activities. Pollution consists of slags, sulphur compound waste and various low grade lead condensates, all rich in heavy metals and metalloids (Pb, As, Cu, Zn, Mn and Fe). Soil was washed with deionized water, 6, 3, 2 and 1 M HCl, 6 M H(2)SO(4), 6 M HNO(3) and 0.1 M Na(2)EDTA. High extraction efficiency was achieved with respect to hydrochloric acid even at the lowest concentration; the solubility of pollutants in nitric acid was low, while sulphuric acid was proven to be problematic with respect to lead. Mobilization of metals and metalloids under DI water effect was minimal indicating that the elements fraction that is weakly bound to soil particles is insignificant. Furthermore, a kinetic study was undertaken, utilizing 1 M HCl and 0.1 M Na(2)EDTA. Results illustrated that 1 M HCl was more effective for intermediate mixing times (up to 4 h) while 0.1 M Na(2)EDTA was better applicable to short mixing times (<1 h) and low pH values (pH < 7.1). 1 M HCl was proven to be very effective for the removal of pollutants from contaminated soil but the high metal content of the resulting solution necessitates further treatment for the retention of metals.     

Thermodynamics of metal cation binding by a solid soil derived humic acid. 2. Binding of Mn(II), Co(NH3)6aq3+ and Hg(II)

Metal binding is an important function of humic acids (HAs) in soils, sediments and waters. At pH 2.0, Mn(II) and Co(NH3)6aq3+ bind tightly in one step labeled A to a solid humic acid NHA isolated from a New Hampshire soil. Two consecutive steps are observed for Hg(II) binding. All the binding isotherms fit the Langmuir model in the temperature range 10.0-50.0 degrees C. Stoichiometric site capacities indicate predominant binding by charge-neutralizing HA carboxylate groups for Mn(II) and the second step A of Hg(II) binding. The binding affinity order in step A is Co(NH3)(6)3+>Hg(II)>Mn(II). Metal binding enthalpy and entropy changes fit the linear correlation found previously for binding of other metal cations by solid HAs. Free energy buffering from cooperative enthalpy and entropy changes and lower enthalpies for metal-HA interactions in solution suggest that desolvation of the cations and HA binding sites as well as HA conformational changes to allow for inner-sphere complexation predominate metal binding by hydrated solid HAs.     

Pesticides and metabolites in cassava, eucalyptus, plum and cashew leaves and roots in relation to a point source in Kibaha, Tanzania

Leaves of Eucalyptus sp., Prunus domestica (plum), and Anacardium occidentale (cashew), as well as roots and leaves of Manihot esculenta (cassava) were used to study the local distribution of pesticides and metabolites from a point source, an old storage site at Vikuge farm in Tanzania. The GPC-cleaned extracts were analyzed by GC-ECD and GC/MS. Eleven organochlorine pesticide residues namely pentachloroanisole, p,p'-DDT, o,p'-DDT, p,p'-DDE, o,p'-DDE, p,p'-DDD, o,p'-DDD, alpha-HCH, beta-HCH, delta-HCH and epsilon-HCH were detected in the samples. The concentrations of total DDT were 818 ng/g fw in Eucalyptus sp., 16 ng/g fw in A. occidentale and 4 ng/g fw in P. domestica. In M. esculenta, total DDT ranged from 191 to 586 ng/g fw in roots and 7 to 425 ng/g fw in leaves. The concentrations of total HCH were up to 15 ng/g fw in Eucalyptus sp., while the concentrations of pentachloroanisole were up to 2 ng/g fw in leaves of M. esculenta. There are very strong positive correlations in the concentrations of the detected compounds, suggesting that they have a common source. The low DDE/DDT ratios (0.02-0.07) in all samples indicate input of non-degraded DDT from the source. The high alpha-HCH/gamma-HCH ratios in some samples (>3.1-10) indicate input of technical HCH. The concentrations of total DDT in cassava roots were either very close to, or greater than, the FAO/WHO limit, indicating risks and concern to public health.