Measurement and management of hospital waste in southern Iran: a case study

One of the requirements for development of human societies is the establishment of new healthcare centers. A variety of wastes are generated in healthcare centers depending on the type of activities. This study was conducted to identify, measure and manage different types of hospital wastes as a case study in a hospital located in southern Iran. For this purpose, a questionnaire was initially designed and distributed among the relevant experts to survey the current trend of waste management in the hospital in terms of waste collection, storage and disposal. Afterwards, the hospital waste was sampled during two seasons of fall and winter. The samples were weighted for seven consecutive days in the middle of each season. Approximately, 10 % of the total waste bags per day collected round the clock were selected for further analysis. The obtained results indicated that infectious-hazardous and pseudo-household wastes were, respectively, about 3.79 kg/day/bed, 1.36 kg/day/bed and 2.43 kg/day/bed of the total generated waste in the hospital. As the research findings suggest, proper separation of infectious and pseudo-household wastes at the source would be an essential step towards mitigating environmental and health risks and minimizing the cost of the hospital waste management.     

Optimized processing power and trainability of neural network in numerical modeling of Al Matrix nano composites

In this research, an experimental study of reinforcing alumina nano-particles into the aluminum alloy matrix was implemented to verify the accuracy of modeling results obtained by feed forward neural networks. Artificial neural network combined with numerical technique were used to predict the various parameters of mechanical properties such as hardness, tensile and compressive yield stress, UTS and elongation percentage. Much experimentation were taken to discover a suitable number of hidden neurons, avoid detraction from the trainability and enable feed forward neural networks to solve more complex problems. The predictions were found to be consistent with experimental measurements.     

Accumulation of potentially harmful elements (PHEs) in lettuce (Lactuca sativa L.) and coriander (Coriandrum sativum L.) irrigated with wastewater: a systematic review and meta-analysis and probabilistic health risk assessment

Environmental Science and Pollution Research - Water shortage and stress around the world lead to increasing wastewater reuse for the agricultural sector. In addition to its benefits, it can be a...     

Radioactivity and radiological risk associated with effluent sediment containing technologically enhanced naturally occurring radioactive materials in amang (tin tailings) processing industry

The processing of amang, or tin tailings, for valuable minerals has been shown to technologically enhance NORM and this has stirred significant radiological safety and health concerns among Malaysia's regulatory authority. A growing radiological concern is now focused on the amang effluent containing NORM in recycling ponds, since these ponds may be reclaimed for future residential developments. A study was carried out to assess the radiological risk associated with amang processing and the accumulated effluent in the recycling ponds. Twenty-six sediment samples from the recycling ponds of two amang plants in the states of Selangor and Perak, Malaysia, were collected and analyzed. The maximum activity concentrations of (238)U, (226)Ra, (232)Th and (40)K recorded in sediments from these ponds were higher than Malaysia's and the world's natural highest. Correspondingly, the mean radium equivalent activity concentration indices, Ra(eq), and gamma radiation representative level index, I(gammar), were higher than the world's average. The enhancement of NORM in effluent sediments as a consequence of amang processing, and the use of a closed water management recycling system created Effective Dose Rates, E (nSv h(-1)), that signal potential environmental radiological risks in these ponds, should they be reclaimed for future land use.     

Preparation and Optimization of Starch/Poly Vinyl Alcohol/ZnO Nanocomposite Films Applicable for Food Packaging

Pollution and destruction of the environment due to the accumulation of non-degradable plastics are some of the most important concerns in the world. A significant amount of this waste is related to the polymers used in food packaging. Therefore, experts in the food industry have been looking for suitable biodegradable alternatives to synthetic polymers. Preparing biocompatible and biodegradable films based on starch is a good choice. In this study, various factors affecting films of starch/polyvinyl alcohol (PVA)/containing ZnO nanoparticles such as the amount of starch, PVA, glycerol, and ZnO were evaluated by response surface methodology (RSM). Film formation by solvent casting method, mechanical properties, swelling, solubility, and water vapor permeability (WVP) were selected as responses of RSM. The results showed that hydrogen bonding interactions between polyvinyl alcohol and starch improved the film formation. The effect of glycerol and PVA content on the mechanical strength was contrary to each other. As the amount of PVA increased, the tensile strength first decreased and then increased. The value of WVP was for all Runs from 0 to 6.77?×?10^??8 g m^??1 s^??1 Pa^??1. Finally, films with high film formation, maximum tensile strength, and high elongation at break, minimum solubility, permeability, and swelling were optimized.

     

Embedded large eddy simulation approach for pollutant dispersion around a model building in atmospheric boundary layer

In the present article, the potential of embedded large eddy simulation (ELES) approach to reliably predict pollutant dispersion around a model building in atmospheric boundary layer is assessed. The performance of ELES in comparison with large eddy simulation (LES) is evaluated in several ways. These include a number of qualitative and quantitative comparisons of time-averaged and instantaneous results with wind tunnel measurements supplemented by statistical data analyses using scatter plots and standard evaluation metrics. Results obtained by both LES and ELES approaches show very good agreement with the experiment. However, addition of turbulence to mean flow at Reynolds averaged Navier–Stokes (RANS)–LES interface in ELES approach not only increases the turbulence intensity, it also results in larger values of turbulent kinetic energy (TKE) as well as a shorter reattachment length in the wake region. Accordingly, higher levels of TKE predicted by ELES increase the local intensity of concentration leading to shorter plume shapes as compared with LES. In general, ELES shows better agreement with experiment on the surfaces of model building and also in the downstream wake region. In terms of computational costs, the CPU time required to obtain statistical values in ELES is about 49 % lower than that of LES and the number of iterations per time step is also reduced by 55 % as compared with LES.     

Effect of acid rain on the fractionation of heavy metals and major elements in contaminated soils

Acid rain is a serious environmental problem worldwide. In the present study, we investigated the effect of acid rain (1:1 equivalent basis H₂SO₄:HNO₃) at pH values of 2.0, 4.0 and 7.0 on the fractionation of heavy metals (Cd, Cu, Fe, Mn, Ni, Pb and Zn) and major elements (K, Na, Ca, and Mg) in contaminated calcareous soils over a 2084 h period. Heavy metals and major elements in soil samples were fractionated before and after 2084 h kinetic release using a sequential extraction procedure. Before kinetic studies the predominant fractions of K, Na, Ca, Mg, Cd and Ni were mainly associated with carbonate fraction (CARB), whereas Fe, Mn and Zn were associated with the Fe–Mn oxide fraction (Fe–Mn oxide). The highest percentage of Pb and Cu were found in the exchangeable (EXC) and organic matter (OM) fractions, respectively. After kinetic study using different simulated acid rain solutions, the major fractions of heavy metals (expect of Cu) and Na was the same as before release. Upon the application of different acid rain solutions, K and Mg were found dominantly in Fe–Mn oxide fraction, whereas Ca was in the EXC fraction. The results provide valuable information regarding metal mobility and indicated that speciation of metals (Cu and Zn) and major elements in contaminated calcareous soils can be affected by acid rain.     

Simultaneous Cr (VI) reduction and diazinon oxidation with organometallic sludge formation under photolysis: kinetics,degradation pathways,and mechanism

Environmental Science and Pollution Research - In this study, simultaneous removal of an organic matter (diazinon, DIZ) and an inorganic substance (chromium, Cr) was used. Breaking down of organic...     

Simultaneous effect of shift work on blood pressure and lipid profile: a path analysis

The aim of this study was to assess the direct and indirect effects of shift work (SW) on the systolic blood pressure (SBP) and lipid profile of male workers. For this purpose, a cross-sectional study was conducted involving 6539 male workers of Esfahan Mobarakeh Steel Company. From all of the participants, 3065 (46.8%) were day workers and the remainder were shift workers. The results of path analysis revealed that the most effective variables on SBP were body mass index, fasting blood sugar, triglycerides and SW with a total effect of 0.241, 0.095, 0.064 and 0.056, respectively.     

Assessment of mobile and potential mobile trace elements extractability in calcareous soils using different extracting agents

• DTPA and NH₄OAc, HNO₃ and EDTA, and MgCl₂ and NH₄NO₃ had similar behavior. • In NH₄OAc, DTPA, and EDTA, the possibility of re-adsorption of trace elements is low. • CaCl₂ may be more suitable than other extracts in calcareous soils. Understanding trace elements mobility in soils, extracting agents, and their relationships with soil components, are essential for predicting their movement in soil profile and availability to plants. A laboratory study was conducted to evaluate extractability of cadmium (Cd), cobalt (Co), copper (Cu), nickel (Ni), and zinc (Zn) from calcareous soils utilizing various extracting agents to be specific CaCl₂, DTPA, EDTA, HNO₃, MgCl₂, NaNO₃, NH₄NO₃, and NH₄OAc. Cluster analysis indicated that DTPA and NH₄OAc, HNO₃ and EDTA, and MgCl₂ and NH₄NO₃ extracting agents yielded comparative values, whereas NaNO₃ and CaCl₂ have shown different behavior than other extracting agents for all studied trace elements. The speciation of extracted trace elements in solutions indicated that in the CaCl₂, NaNO₃, NH₄NO₃, and MgCl₂ extracting agents most extracted Cd, Co, Ni, Zn, and part of Cu were as free ions and may be re-adsorbed on soils, leading to lower extractability, whereas, in the case of HNO₃ extracting agent, the likelihood of re-adsorption of trace elements may be little. The results of speciation of trace elements using NH₄OAc, DTPA, and EDTA extracting agents showed that Me-(Acetate)₃^–, Me-(Acetate)₂(aq), Me(DTPA)³⁻, Me(EDTA)²⁻, and MeH(EDTA)^– complexes dominated in solutions indicating that the extracted trace elements may not be re-adsorbed on soils, leading to higher extractability. The results of this study are useful for short and long-term evaluations of trace elements mobility and further environmental impacts.