Microbial community variation and its relationship with nitrogen mineralization in historically altered forests

Past land use can impart soil legacies that have important implications for ecosystem function. Although these legacies have been linked with microbially mediated processes, little is known about the long-term influence of land use on soil microbial communities themselves. We examined whether historical land use affected soil microbial community composition (lipid profiles) and whether community composition was related to potential net nitrogen (N) mineralization rates in southern Appalachian (USA) forest stands abandoned from agriculture or logging and reforested >50 yr ago. Microbial community composition was determined by a hybrid procedure of phospholipid fatty acid (PLFA) and fatty acid methyl ester (FAME) analysis. We found that community composition varied significantly with past land use. Communities in formerly farmed stands had a higher relative abundance of markers for gram-negative bacteria and a lower abundance of markers for fungi compared with previously logged and reference (i.e., no disturbance history) stands. Potential net N mineralization rates were negatively correlated with fungal and gram-negative bacterial markers in both farmed and reference stands, and fungal abundance and soil bulk density effectively predicted mineralization rates in all stands. Our results indicate that the alteration of microbial communities by historical land use may influence the ecosystem processes they mediate. This is in contrast to typical expectations about microbial community resilience to change. Here, the decrease in fungal abundance observed from disturbance appeared to result in decreased nitrogen mineralization over the long term.     

Allelopathic effect of four weed species extracts on germination, growth and protein in different varieties of Glycine max (L.) Merrill

Allelopathic effect of Ageratum conyzoides L., Cynodon dactylon (L.) Pers., Parthenium hysterophorus L., and Solanum nigrum L. were examined on seed germination, seedling growth, total protein content and protein profile on Ankur, Bhatt, Bragg, PK -416, PS-1042 and Shilajeet varieties of soybean (Glycine max (L) Merill). Aqueous extracts of weeds (10% w/v) showed both inhibitory and stimulatory influence on percent seed germination and seedling growth in different varieties of soybean. On the basis of per cent reduction in different parameters, the variety Bragg and PS-1042, and Shilajeet were resistant and susceptible respectively to different weed extracts, and among weed extracts, S. nigrum was most effective followed by P. hysterophorus compared to others. The total protein content (mg/g f wt.) in different varieties was increased with all the weed extracts except Bragg with C. dactylon and P. hysterophorus, PS-1042 with A. conyzoides and Shilajeet with C. dactylon, in which it was decreased. The protein banding pattern in different varieties not only differ between control and treatments but also among treatments. The order of susceptibility of different varieties with different weed extracts followed the order: Ankur > PK-416 > Bhatt > Shilajeet > Bragg and > PS-1042.     

Polychlorinated Biphenyls (PCBs) in Mussels along the Chilean Coast

- DOI: http://dx.doi.org/10.1065/espr2006.01.011 Goal, Scope and Background Chile signed the Stockholm Convention, which establishes measures to reduce or eliminate Persistent Organic Pollutants (POPs) release into the environment, including the prohibition of their use and reduction of secondary products release, as well as management related with waste treatment. Among POPs, PCBs are a family of 209 compounds that differ in chlorine level and position. These substances present a wide variability in their physicochemical properties such as vapor pressure, water solubility and partition coefficients that determine their behavior and mobility within the different environmental compartments. In Chile, as in other countries, the use of these compounds were and continue to occur in diverse industrial applications such as dielectric fluid in transformers and condensers, with a use in Chile of approximately 550,000 L. A sampling of bivalves was performed during the years 2000-2002 in order to obtain information on the spatial distribution of the PCB levels for the length of the long Chilean coast (180–540 South latitude, 4,200 km), contributing in this way to a better understanding of the PCB trend and eventual fractionation along latitudinal gradients in Chile, using as the bivalve Perumytilus purpuratus ('Chorito Maico') bioindicator. Methods The marine bivalves Perumytilus purpuratus were collected in 16 localities in northern and southern Chile. All samples were lyophilized, and PCBs (51 congeners) were extracted in a Soxhlet system (24 h) with n-hexane. Samples were cleaned in florisil and analyzed by GC-ECD. Blanks, certified reference materials and standards were processed along with the samples. Results and Discussion The results obtained for P. purpuratus indicate a congeneric distribution profile associated to a latitudinal gradient, and the statistical analysis of the congeneric composition of the PCBs indicated five groups in relation to the molecular weight (number of chlorines), where the lighter congeners were observed in areas corresponding to high latitudes with total PCB values of 298 ng/g dry weight. Conclusion P. purpuratus turns out to be a good bioindicator of PCB levels in the coastal areas of Chile due to its wide distribution. The highest concentrations and the more volatile congeners were found in southern Chile, which could be the result of processes of long-range transport or illegal discharge occurring in such remote areas. These results confirm previous data from the International Mussel Watch project ten years ago. Recommendation and Outlook Future studies are needed to confirm our findings utilizing another environmental matrix such as soil/sediments and air samples.     

Removal of nanoparticles from CMP wastewater by magnetic seeding aggregation

CMP wastewaters have high solids content resulted from abrasive nanoparticles. Tremendous amount of ultrapure water consumption also makes the removal of nanoparticles from CMP wastewaters an important issue. Magnetic seeding aggregation of silica nanoparticles from the oxide CMP wastewater is studied in this work. Magnetite nanoparticles were synthesized and used as seeding particles. The turbidity of the CMP wastewater was reduced from 110 NTU to 7 NTU when solution pH was 6 and no addition of salt. This is because silica and magnetite nanoparticles were highly oppositely charged and the aggregation between silica and magnetite nanoparticles was achieved by electrostatic attractions. When the seeded wastewater was placed in a magnetic field strength higher than 800 G, the turbidity of the CMP wastewater was reduced to 1 NTU, which was clearer than the CMP wastewater treated by many other technologies.     

Depositional flux of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans in an urban setting

Dry and wet deposition fluxes of the PCDD/F substituted congeners were measured at two different sites (Clinton Drive and Lang Road) in Houston, TX between December 2003 and April 2004. Average total dry deposition fluxes of 351 and 125pgm(-2)d(-1) were found at Clinton Drive and Lang Road, respectively. A wet deposition flux of 2.873pgm(-2)d(-1) was measured at the Clinton Drive site. The results indicated that the dry deposition process exhibited spatial variability. In addition, the results also demonstrated that precipitation, although intermittent, is the most important mechanism for the removal of dioxins from atmosphere in the area of study. Combining the contributions of the dry and wet deposition processes at Clinton Drive resulted in a total bulk deposition flux of 527pg m(-2)d(-1). The total dry and wet deposition fluxes were dominated by OCDD followed by 1,2,3,4,6,7,8-HpCDD at both sites. Overall average dry deposition velocities of 0.35 and 0.15cms(-1) were calculated at Clinton Drive and Lang Road sites, respectively. While these velocities were similar to velocities observed in other geographical areas, the contribution of OCDD to the total deposition flux in Houston was significantly higher, probably reflecting the unique nature and character of Houston dioxin sources. The results also showed that lower chlorinated congeners, primarily present in the gas phase, are more likely to be removed from the atmosphere by precipitation. Relationships between the detected congeners in the dry deposition samples and other routinely measured air pollutants/meteorological parameters were found. The results showed that in general, the dry deposition of these congeners was consistently negatively correlated with SO(2) and NO(x) concentrations in the air and positively correlated with relative humidity. However, more research is needed to ascertain those correlations.     

Characteristics of pilots who report deliberate versus inadvertent visual flight into Instrument Meteorological Conditions

Aircraft accidents and incidents associated with visual flight into instrument weather conditions continue to account for a significant proportion of fatalities involving general aviation aircraft. The aim of this study was to examine pilot recounts of flights involving inadvertent or deliberate flight into Instrument Meteorological Conditions (IMC). Of the 251 responses that were examined, 145 pilots indicated that they had entered IMC inadvertently during a visual flight, while 93 had done so deliberately. Amongst non-instrument-rated pilots, two cohorts were identified whereby pilots who deliberately entered instrument conditions tended to have experienced the conditions previously, possess a comparatively greater tolerance of risk, experienced less anxiety during the event recounted, and perceive the risks associated with the transition into instrument conditions as relatively lower than those pilots whose entry into instrument conditions was inadvertent. These results are interpreted as confirmation of the need to address the problem of visual flight into instrument conditions from a number of different perspectives, taking into account experience and individual differences in risk tolerance.     

Influence of lignin, pentachlorophenol and heavy metal on antibiotic resistance of pathogenic bacteria isolated from pulp paper mill effluent contaminated river water

Pulp paper mill pollutants are the major source of aquatic contamination having metals, lignin and chlorophenols. Study was conducted to see the effect of these contaminants on antibiotic resistance pattern of isolated bacteria. Pulp paper effluents were evaluated for its physico-chemical properties i.e, BOD 72143 +/- 164.81 to 22.32 +/- 2.48, COD 213136 +/- 583.59 to 60.40 +/- 6.34, total phenol 386 +/- 71.24 to 0.43 +/- 0.0, lignin 26312 +/- 258.59 to 73.67 +/- 31.81and microbial quality i.e. K. pneumonae, S. typhi, S. faecalis, P. aeruginosa, E. coli, Ent. faecalis, A. hydrophila, B. subtilis, S. aureus, Y enterolitica and V vulrificus. Antibiotic sensitivity (10-30 microg), heavy metal resistance (100-1000 microg ml(-1)), lignin (1000-10,000 ppm) and pentachlorophenol (100-1000 ppm) tolerance of bacterial strains were assessed by seven classes of antibiotics. Eleven bacterial isolates were found multidrug resistant towards antibiotics, heavy metal, lignin and PCP. Out of 11 isolates, 90.9% were found resistant against eleven antibiotics which acquired 100% resistant in presence of heavy metal, lignin and chlorophenols. Results also revealed that concentration of lignin (50-350 ppm) and PCP (5-30 ppm) induced maximum growth (273-8050 cfu ml(-1)) of pathogenic bacteria in river water.     

Trade transport and environment linkages at the U.S.–Mexico border: Which policies matter?

We apply a fixed-effects model to examine the impact of trade and environmental policies on air quality at ports along the U.S.-Mexico border. We control for other factors influencing air quality, such as air quality of cities near the border, volume of traffic flows and congestion. Results show the air quality improved after 2004, when the diesel engine policy was applied. We see mixed results for the trade policy, whose implementation time varies across ports along the international border. Controlling for air quality in cities near the border is essential for assessing the policy contributions to air quality.