Ceria-doped SnO2 nanocubes for solar light–driven photocatalytic hydrogen production

Environmental Science and Pollution Research - The photocatalytic generation of hydrogen via solar energy using metal oxide semiconductor catalysts is a clean and renewable process which has the...     

Assessing of Environmental Quality in Six Areas in India,Sri Lanka and Bangladesh

Environmental quality for environmental health has been examined visually by describing general conditions and drinking water supply, sanitation and solid waste treatment conditions and practices in six South-East Asian villages with a dense population. The environmental review was supplemented by discussions with local people and political and administrative decision makers. Some drinking water analyses were done in order to show the water quality to the local people. The quality of the general conditions and the conditions and practices of drinking water supply, excreta disposal and solid waste treatment practices have been graded with the grading system presented below. The grading could be done in 1 or 2 days in each area by two persons, of which one was an environmental scientist and the other a social scientist, who also knew the local culture and worked as a translator.     

Ecotoxicology of alpine streams in the West Carpathians—Alpine Bullhead (Cottus poecilopus) and high mountain flash flood effects

Environmental Science and Pollution Research - Flash floods represent a serious threat to wildlife, water biota, and human life in pre-alpine regions, particularly in recent historical memory. The...     

Fungi and wind strongly influence the temporal availability of logs in an old-growth spruce forest.

Coarse woody debris (CWD) is a key habitat for many species in forest ecosystems. To ensure the long-term survival of such species, forest management regimes must include measures that promote dead wood dynamics similar to those of natural forests. Thus, information on CWD dynamics under natural conditions is required, including data pertaining to the underlying agents of disturbance. This study examines modes of mortality, decay rates, and temporal patterns in the availability of Picea abies logs in a Swedish old-growth forest affected by internal, small-scale disturbance. All 684 logs in a 6.6-ha plot were mapped and classified into one of six decay classes. Logs in the early stages of decay were examined for the presence of heart-rot fungi. Six years later all logs were re-inventoried, including newly formed logs. Matrix models based on the transition rates between decay classes showed that it took about 60 years for 90% of the logs to decay beyond class 6 (a deformed trunk with soft wood). Large logs (> 26 cm) decayed 40% more slowly than small logs (< 25 cm). The initial volume of logs was 37.6 m3/ha but increased to 44.8 m3/ha after six years. In addition, there was a large shift in the decay-class distribution. The volume of logs in early and late decay classes increased by 71% and 45%, respectively, while the volume of logs in the intermediate decay classes decreased by 32%. The fluctuations appear to result from pulses in mortality, driven by a combination of strong winds and the heart-rot fungus, Phellinus chrysoloma, which was present in more than 30% of all logs at an early stage of decay. These results show that large temporal fluctuations in dead wood also occur in the absence of large-scale disturbance, and that heart-rot fungi are important factors driving the overall dynamics of dead wood. Since many wood-inhabiting species are naturally rare and have very specific substrate demands, such temporal variability in dead wood availability may have effects on biodiversity and should be taken into account when designing small, protected forest areas.     

Studying crop sequences with CarrotAge,a HMM-based data mining software

We have developed a knowledge discovery system based on high-order hidden Markov models for analyzing spatio-temporal data bases. This system, named CarrotAge , takes as input an array of discrete data – the rows represent the spatial sites and the columns the time slots – and builds a partition together with its a posteriori probability. CarrotAge has been developed for studying the cropping patterns of a territory. It uses therefore an agricultural drench database, named Ter-Uti , which records every year the land-use category of a set of sites regularly spaced. The results of CarrotAge are interpreted by agronomists and used in research works linking agricultural land use and water management. Moreover, CarrotAge can be used to find out and study crop sequences in large territories, that is a main question for agricultural and environmental research, as discussed in this paper.     

Mosaicism for trisomy 12: Four cases with varying outcomes

Trisomy 12 observed in chorionic villus sampling (CVS) may reflect generalized mosaicism or indicate mosaicism confined to only the placenta. In this report, four cases of trisomy 12 observed in CVS or cultured placental biopsies with varying outcomes are presented. Seven dinucleotide repeat polymorphisms for chromosome 12 were used to determine the chromosome 12 origins in the fetus or child and to delineate the mechanism(s) that gave rise to the trisomy. In two cases (cases A and C), the mosaicism was confined to the placenta, resulting in normal liveborns. Although, in one case, the molecular results suggested an apparent duplication of one paternal chromosome 12 in the placenta, normal biparental inheritance was found in the diploid fetal cell line in both cases. In two other cases (cases B and D), trisomy 12 was observed in both extraembryonic and fetal tissues. In one of these pregnancies, a child was born by Caesarean section at 37 weeks because of intrauterine growth retardation and oligohydramnios, and resulted in neonatal death. Molecular markers and fluorescence in situ hybridization (FISH) revealed low-level trisomy 12 mosaicism in the spleen. In the fourth case, fetal abnormalities were detected on ultrasound and low-level trisomy 12 mosaicism was observed in amniotic fluid cells using conventional cytogenetics and FISH. Molecular markers revealed a maternal meiosis I non-disjunction of chromosome 12 in DNA from a cultured placental biopsy. Although predicting the outcomes of pregnancies involving confined placental mosaicism remains difficult, molecular techniques are valuable tools for distinguishing uniparental from biparental disomy and mechanisms of mosaicism.     

Urban Stream Rehabilitation: A Design and Construction Case Study

/ This paper describes the fundamental design features, and construction methods and sequence, of a rehabilitation project on a small suburban creek in Moscow, Idaho, USA. A meandering channel pattern was reestablished for approximately 280 m of straightened, dredged channel, a new floodplain was excavated, and the new riparian zone was replanted. The new stream channel was sized to accommodate an estimated natural bankfull discharge ( approximately 5.6 cms), and floodplain design attempted to match the conveyance of the old enlarged channel (14-20 cms). The project was coordinated by a local nonprofit environmental organization, and the design and construction were tailored to donated materials and a largely volunteer labor force. A high-magnitude flood event (ca. 50-year recurrence interval) six months after construction had no significant impact on the newly constructed channel and revetments, but underscored the need for important detailing of the structures. The use of volunteer labor, while entailing certain benefits, complicates project planning and construction. The most general lesson learned from this project is that sponsoring agencies and clients need to be informed of the many steps and sequencing of properly constructed, complex stream rehabilitation projects as well as the high time and cost requirements for these tasks. KEY WORDS: Stream corridor restoration; Channel design; Streambank revetments     

The three-dimensional prey field of the northern krill, Meganyctiphanes norvegica, and the escape responses of their copepod prey

In the north Atlantic, Meganyctiphanes norvegica feeds predominantly on copepods, including Calanus spp. To quantify its perceptual field for prey, and the sensory systems underlying prey detection, the responses of tethered krill to free-swimming Calanus spp. were observed in 3D using silhouette video imaging. An attack–which occurred despite the krill’s being tethered—was characterized by a pronounced movement of the krill’s antennae towards the target, followed by a propulsion and opening of the feeding basket. Frequency distributions of prey detection distances were significantly different in the light vs. the dark, with median values of 26.5 mm and 19.5 mm, respectively. There were no significant differences in the angles at which prey were detected by krill (relative to the predator’s longitudinal body axis) in the light vs. the dark. Prey detections were symmetrically distributed on either side of the predator, in both light and dark. However, significant asymmetry was found in the dorsal–ventral direction with 80% of the prey detections located below the midline of the krill’s body axis and, given the placement and orientation of the compound eyes, presumably outside its visual field of view. This indicates that, at least under these conditions, vision was not the main sensory modality involved in the detection of active prey by M. norvegica. However, under some circumstances, vision may provide supplemental information. Avoidance responses of copepod prey were nearly twice the velocity of their nominal background swimming speed (153 ± 48 and 85 ± 75 mm s⁻¹, respectively), on average taking them 43 ± 16 mm away from the predator. This is far beyond the krill’s perceptual range, suggesting that the escape reaction provides an effective deterrent to predation (although perhaps less so for free-swimming krill). This information can be used to parameterize models that assess the role of krill as predators in marine ecosystems.     

Investment Evaluation of an Integrated Steel Mill using Multiple Criteria

A conventional steel manufacturing process generates considerable amounts of reject streams and secondary raw material. These streams are either recycled back to the process or treated as waste. Recycling affects negatively on the production yield and on the controllability of unit operations. Waste represents considerable cost unless utilized in another production process as raw material. In these streams, there exists a potential to use the chemical elements more effectively. Therefore, it might be interesting to find an economical technical solution to collect the streams and increase steel production.

Investments on process equipment are typically evaluated using conventional economic figures, like payback time, Net Present Value (NPV) etc. The problem with these practices is, that they consider only numerical aspects. Non-numerical and non-economical criteria are hard to cater to the evaluation. Still, they may affect on the investment profitability in the long run. Such criteria include environmental friendliness or the aspects of process integration.

The article presents a comparison of a conventional steel manufacturing process with one reject stream processing alternative. A target in the process modification is to optimize the use of material and energy within the site. The comparison is based on a balanced set of criteria that affect on the efficiency of an investment. The use of these criteria is a part of the new methodology that has been developed to evaluate investments on integrated process sites. In addition to the criteria, the complete methodology includes: 1) connection of company’s strategic issues into technical design and decision making, 2) optimization of the process and calculation of process potentials (differences in the performance values between the existing process and the modified process) through the use of process integration methodologies and 3) use of decision-making aids. The research is a part of Finnish National Technology Program, “Process-Integration 2000–2004”.     

Properties of a Poly(3-hydroxybutyrate) Depolymerase from Penicillium funiculosum

A poly(3-hydroxybutyrate) (PHB) depolymerase was purified from a fungus, Penicillium funiculosum (IFO6345), with phenyl-Toyopearl and its properties were compared with those of other PHB depolymerases. The molecular mass of the purified enzyme was estimated at about 33 kDa by sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis. The pH optimum and pI were 6.5 and 6.5, respectively. The purified protein showed affinity to Con A-Sepharose, indicating that it is a glycoprotein. Diisopropylfluorophosphate and dithiothreitol inhibited the depolymerase activity completely. The N-terminal amino acid sequence of the purified enzyme was TALPAFNVNPNSVSVSGLSSGGYMAAQL, which contained a lipase box sequence. This purified enzyme is one of the extracellular PHB depolymerase which belong to serine esterase. The purified enzyme showed relatively strong hydrolytic activity against 3-hydroxybutyrate oligomers compared with its PHB-degrading activity. PHB-binding experiments showed that P. funiculosum depolymerase has the weakest affinity for PHB of all the depolymerases examined.