铁盐和铝盐混凝对印染废水生化出水中溶解性有机污染物的去除特性

以三氯化铁和硫酸铝为混凝剂,印染废水二级生化出水为研究对象,并利用XAD-8/XAD-4吸附树脂联用技术将印染废水生化出水中溶解性有机物分为疏水酸、非酸疏水物质、弱疏水物质及亲水物质4类有机物,通过小试实验探讨了2种混凝剂对生化出水中各类溶解性有机物的去除效果及特点。实验结果表明,对于该印染废水的生化出水,溶解性有机物的主要成分是疏水性物质,以DOC表征时占总DOC的75%,其中疏水酸约占41%,疏水性物质也是引起色度的主要物质,所占比例以ADMI7.6表征时为89%,其中以非酸疏水物质的贡献最大,达到52%,并且非酸疏水物质中不饱和双键或芳香环有机物的含量较高。在三氯化铁和硫酸铝各自最佳的混凝条件下,均能够有效去除由疏水性物质（疏水酸和非酸疏水物质）引起的色度,但三氯化铁对弱疏水性物质以及亲水物质的去除率高于硫酸铝,这使得三氯化铁对印染废水生化出水中的溶解性有机物的去除效果优于硫酸铝。并且三氯化铁和硫酸铝混凝工艺均能明显降低生化出水的毒性。     

水体颗粒物以及土壤对有机物吸附常数的测定

本文介绍了用批量平衡测定水体悬浮颗粒物以及土壤对有机物吸附常数的测定方法，并给出实例和方法的注意事项。     

Aerogels and metal–organic frameworks for environmental remediation and energy production

Environmental pollution and climate change are requiring new methods to clean pollutants and produce sustainable energy. Aerogels and metal organic frameworks are emerging as advanced porous materials with higher functionality, high surface area, high porosity and flexible chemistry. Aerogels are dried gels prepared using the sol–gel procedure, whereas metal organic frameworks are networks of organic ligands and metal ions connected by coordination bonds. Applications of aerogels include the removal of heavy metals, CO₂ capture and reduction, photodegradation of pollutants, air cleanup and water splitting. This article reviews the synthesis and types of aerogels and metal organic frameworks, and the application to pollutant removal, energy production including hydrogen, methane reforming, CO₂ conversion and NOx removal.     

The impact of climate change on global energy use

Robust decision making, a growing approach to infrastructure planning under climate change uncertainty, aims to evaluate infrastructure performance across a wide range of possible conditions and identify the most robust strategies and designs. Robust decision making seeks to find potential weaknesses in systems in order to gird these through a combination of policy, infrastructure, and, in some cases, resilient or recovery strategies. A system can be explored by simulating many combinations of uncertain climatic and economic parameters; statistical clustering can identify parameter thresholds that lead to unacceptable performance. Often, however, uncertain variables are correlated, complicating the robustness analysis and casting doubt upon the thresholds identified. Here, we evaluate the impact of ordinary, hidden correlations in uncertainty parameters that drive simulation in robust decision making. We induced correlations between temperature and key climatic and economic parameters. We tested correlations of 0%, 30%, 60%, and 90% between temperature and the absolute value of precipitation, coefficient of variation, and downward surface solar radiation, and negative correlations between temperature and net variable benefit and the discount rate. We used a calibrated simulation model of a dam system regulating Lake Tana, Ethiopia, to compute the agricultural supply and net present value of the reservoirs. As the correlation strength increased, the results converged in a smaller region. We found that strong correlations depressed robustness scores of lower-performing alternatives and conversely increased results of the higher-performing alternatives. As the correlations increased in favorable alternatives, the failure thresholds became more extreme, speciously suggesting that only intense changes would result in poor performance. This overall analysis highlights the degree to which correlations of an interconnected climatic and economic system can impact outcomes of robust decision making and suggests methods to avoid confounding results.

     

Trend reversal from source region to remote tropospheric NO2 columns

Environmental Science and Pollution Research - Global tropospheric nitrogen dioxide (NO2) changes have different or even opposite impacts on the photochemical formation of ozone in different...     

Spatial differentiation of comprehensive suitability of urban human settlements based on GIS: a case study of Liaoning Province,China

Environment, Development and Sustainability - The comprehensive suitability of regional human settlements is of great significance to the development and spatial distribution of regional human...     

Research on the experiment of the enhancement removal of fine sand by hydrocyclone in sewage treatment plant

The content of fine sand (< 200 μm) in primary sludge is relatively high in Chongqing sewage treatment plant owing to the part of rainwater will be mixed with sand and discharged into the municipal pipe network. Due to the insufficient separation of the sand, different obstacles to subsequent treatment processes may increase equipment wear, reduce effective volume of the tank, or shorten the cleaning cycle. There is a common use of grit chamber for the separation. Nevertheless, the use of hydrocyclone shows an outstanding performance in cost effectiveness and ease operation. The primary sludge in a sewage plant in Chongqing was monitored, and the average concentration of total suspend solids (TSS), total sand content, and volatile suspended solid (VSS) were 40.25 g/L, 17.51 g/L, and 13.41 g/L, respectively. The size of sand in the sludge was small, and the sand below 30 μm accounted for about 70% of the total sand. It formed flocs with organic matter and was removed in subsequent process units. While the size between 30–200 μm, called fine sand, was the main separation object, accounted for about 28.5%. According to XRF and XRD analysis, the sludge composition was mainly composed of quartz (SiO₂), plagioclase (Na(AlSi₃O₈)), and calcite (CaCO₃), which were similar to the main mineral composition of surface sediments and mountain rocks in the main urban area of Chongqing. A single-factor experiment on two types (FX100 and FX50) of hydrocylones was conducted to determine their abilities concerning the separation of fine sand and enrichment of organic matters from primary sludge. FX100 and FX50 showed best performance in the case of P = 0.17 Mpa, underflow diameter (Du) = 18 mm and P = 0.20 Mpa, Du = 6 mm, respectively. The removal efficiency of fine sand by hydrocyclone FX50 was 71.39%. While, it had poor performance on organic matter enrichment and the removal efficiency of which was 17.38%. By contrast, the removal rate by FX100 reached 61.89% for fine sand and only 6.89% for organic matters detached. The superimposition effect did not appear in the serial experiments on hydrocylone FX100 and FX50, but the power is 3.5 times of that of single-stage hydrocylone FX100. Comprehensive consideration of the processing capacity per unit time and operating power, the hydrocylone FX100 was more suitable for actual operation.

     

High performance of multi-layered alternating Ni–Fe–P and Co–P films for hydrogen evolution

Judiciously engineering the electrocatalysts is attractive and challenging to exploit materials with high electrocatalytic performance for hydrogen evolution reaction. Herein, we successfully perform the interface engineering by alternately depositing Co–P and Ni–Fe–P films on nickel foam, via facile electroless plating and de-alloying process. This work shows that there is a significant effect of de-alloying process on alloy growth. The electronic structure of layered alloys is improved by interface engineering. The multilayer strategy significantly promotes the charge transfer. Importantly, the Co–P/Ni–Fe–P/NF electrode fabricated by interface engineering exhibits excellent electrocatalytic hydrogen evolution activity with an overpotential of 43.4 mV at 10 mA cm-2 and long-term durability for 72 h in alkaline medium (1 mol L-1 KOH). The innovative strategy of this work may aid further development of commercial electrocatalysts.     

ZnO-based heterostructures as photocatalysts for hydrogen generation and depollution: a review

Environmental Chemistry Letters - Energy shortage and escalating pollution are major challenges globally. Heterogeneous photocatalysis is one of the most cost-effective methods for producing...