Is Globalization Detrimental to CO<Subscript>2</Subscript> Emissions in Japan? New Threshold Analysis

Using annual data from 1970 to 2014, this paper examines the effects of globalization on CO₂ emissions in Japan while accounting for economic growth and energy consumption as potential determinants of carbon emissions. The structural breaks and asymmetries arising due to policy shifts require attention, and hence, an asymmetric threshold version of the ARDL model is utilized. The results show the presence of threshold asymmetric cointegration between variables. Threshold-based positive and negative shocks arising from globalization increase carbon emissions, while the impact of the latter is more profound. Energy consumption (economic growth) also has a significant positive effect on carbon emissions. Globalization, economic growth, and energy consumption significantly increase carbon emissions in the short run. We suggest that policy makers in Japan consider globalization and energy consumption as policy tools in formulating their policies regarding protecting sustainable environmental quality in the long run. Otherwise, the Japanese economy may continue to face environmental consequences such as undesirable climate change and massive warming at the micro and macro levels as a result of potential shocks arising from globalization and energy consumption.     

Metal accumulation in Raphanus sativus and Brassica rapa: an assessment of potential health risk for inhabitants in Punjab,Pakistan

Pakistan is an agricultural country and due to the shortage of clean water, most of the irrigated area (32,500 ha) of Pakistan was supplied with wastewater (0.876?×?109 m³/year). Concentrations of heavy metals in radish (Raphanus sativus) and turnip (Brassica rapa) taken from vegetable fields in Sargodha, Pakistan, were measured. Untreated wastewater was used persistently for a long time to irrigate these vegetable fields. A control site was selected that had a history of fresh groundwater irrigation. Mean metal concentrations were found for irrigation water, soil, and vegetables. In irrigation water, concentrations of Mo and Pb at three sites and Se at sites II and III were higher than the recommended limits. In vegetables, concentrations of Mo and Pb were above the maximum permissible limits. High bioconcentration factor was observed for Zn (12.61 in R. sativus and 11.72 in B. rapa) at site I and high pollution load index was found for Pb (3.89 in R. sativus and 3.87 in B. rapa) at site II. The differences in metal concentrations found in samples depended upon different soil nature and assimilation capacities of vegetables at different sites which in turn depended upon different environmental cues. The entrance of metal and metalloids to human body may happen through different pathways; however, the food chain is the chief route through which metals are transferred from vegetables to individuals. Health risk index observed for metals, (Mo, As, Ni, Cu, and Pb) higher than 1 indicated high risk through consumption of these vegetables at three sites.

     

Movement towards a low carbon emitted environment: a test of some factors in Malaysia

There exists a high global concern in different nations on environmental sustainability especially at the focal stage of increased economic growth and development process due to high level of environmental degradation and pollution. The major aim of this study was to empirically examine how to minimise carbon emissions (CO₂) in Malaysia which are mainly caused by energy production, fossil fuel consumption, population density and economic growth. The study adopted the method of autoregressive distributed lag bound testing approach to analyse the data for the period 1971–2011. The study found that economic growth in Malaysia has a direct relationship with CO₂ emissions in both the short run and the long run. Similarly, there is a positive relationship between fossil fuel consumption and CO₂ emissions over the same period. Population density was found to have positive impacts on CO₂ emissions. Contrarily, the relationship between the activities of energy production and pollution is negative in the long run. The study recommends that a targeted GDP growth rate should be set with the consideration to avoid more environmental pollution. In addition, the positive impact of fossil fuel consumption on the environmental pollution implies that there is a need to make and implement policies that will encourage the use of public transportation system more than private transportations. That is, the unnecessary use of private vehicles should be discouraged in order to reduce the extent of fossil fuel consumption.     

Impact of climate factors on cyanobacterial dynamics and their interactions with water quality in South Taihu Lake,China

Cyanobacterial bloom events in South Taihu Lake cause serious water quality problems and disturb aesthetic view of lake’s environment. In this study, correlations between cyanobacterial blooms and hydro-meteorological factors, including water quality, temperature and precipitation were investigated. Results demonstrated that South Taihu Lake was heavily affected by cyanobacteria and the proliferation of cyanobacteria due to variations in hydro-meteorological factors and water quality conditions. Water quality parameters, including COD, NH₃-N, TN and TP improved significantly since 2008 even at an elevated cyanobacterial bloom situation. Correlation analyses have shown that the development of cyanobacterial density and chlorophyll a concentration was sensitive to a wider temperature variation. The optimum temperature for cyanobacteria was 20°C, while extremely low and high temperatures were found to suppress their growth. Moreover, unusual rainfall patterns were measured during the study period (2003–2009), which showed an adverse impact on cyanobacterial development. Findings from this study suggested that seasonal lake’s water quality monitoring; suitable treatment of cyanobacterial blooms and strict policy implementation can solve the water quality issues in highly eutrophic lakes like Taihu.     

PTFE-coated non-stick cookware and toxicity concerns: a perspective

PTFE is used as an inner coating material in non-stick cookware. This unique polymer coating prevents food from sticking in the pans during the cooking process. Such cookware is also easy to wash. At normal cooking temperatures, PTFE-coated cookware releases various gases and chemicals that present mild to severe toxicity. Only few studies describe the toxicity of PTFE but without solid conclusions. The toxicity and fate of ingested PTFE coatings are also not understood. Moreover, the emerging, persistent, and well-known toxic environmental pollutant PFOA is also used in the synthesis of PTFA. There are some reports where PFOA was detected in the gas phase released from the cooking utensils under normal cooking temperatures. Due to toxicity concerns, PFOA has been replaced with other chemicals such as GenX, but these new alternatives are also suspected to have similar toxicity. Therefore, more extensive and systematic research efforts are required to respond the prevailing dogma about human exposure and toxic effects to PTFE, PFOA, and GenX and other alternatives.     

Chemical speciation and bioavailability of rare earth elements (REEs) in the ecosystem: a review

Rare earths (RE), chemically uniform group of elements due to similar physicochemical behavior, are termed as lanthanides. Natural occurrence depends on the geological circumstances and has been of long interest for geologist as tools for further scientific research into the region of ores, rocks, and oceanic water. The review paper mainly focuses to provide scientific literature about rare earth elements (REEs) with potential environmental and health effects in understanding the research. This is the initial review of RE speciation and bioavailability with current initiative toward development needs and research perceptive. In this paper, we have also discussed mineralogy, extraction, geochemistry, analytical methods of rare earth elements. In this study, REEs with their transformation and vertical distribution in different environments such as fresh and seawater, sediments, soil, weathering, transport, and solubility have been reported with most recent literature along key methods of findings. Speciation and bioavailability have been discussed in detail with special emphasis on soil, plant, and aquatic ecosystems and their impacts on the environment. This review shows that REE gained more importance in last few years due to their detrimental effects on living organisms, so their speciation, bioavailability, and composition are much more important to evaluate their health risks and are discussed thoroughly as well.     

Characteristics of volatile compound emission and odor pollution from municipal solid waste treating/disposal facilities of a city in Eastern China

Transfer station, incineration plant, and landfill site made up the major parts of municipal solid waste disposal system of S city in Eastern China. Characteristics of volatile compounds (VCs) and odor pollution of each facility were investigated from a systematic perspective. Also major index related to odor pollution, i.e., species and concentration of VCs, olfactory odor concentration, and theoretic odor concentration, was quantified. Oxygenated compounds and hydrocarbons were the most abundant VCs in the three facilities. Different chemical species were quantified, and the following average concentrations were obtained: transfer station, 54 VCs, 2472.47 μg/m³; incineration plant, 75 VCs, 33,129.25 μg/m³; and landfill site, 71 VCs, 1694.33 μg/m³. Furthermore, the average olfactory odor concentrations were 20,388.80; 50,677.50; and 4951.17, respectively. The highest odor nuisance was detected in the waste tipping port of the incineration plant. A positive correlation between the olfactory and chemical odor concentrations was found with R ² = 0.918 (n = 15, P < 0.01). The result shows odor pollution risk transfer from landfill to incineration plant when adopting thermal technology to deal with the non-source-separated waste. Strong attention thus needs to be paid on the enclosed systems in incineration plant to avoid any accidental odor emission.

     

Bacillus safensis with plant-derived smoke stimulates rice growth under saline conditions

Environmental Science and Pollution Research - Salinity is a worldwide environmental problem of agricultural lands. Smoke and plant growth-promoting bacteria (PGPR) are individually used to improve...     

Marble industry effluents cause an increased bioaccumulation of heavy metals in Mahaseer (Tor putitora) in Barandu River,district Buner,Pakistan

Environmental Science and Pollution Research - The present study was conducted to evaluate the impact of marble industry effluents on the accumulation of heavy metals in selected tissues of...     

Non-linear autoregressive neural network approach for inside air temperature prediction of a pillar cooler

The volcanic plate made pillar cooler system is designed for outdoor spaces as a heat exchanging medium and reduces the outcoming air temperature which flows through the exhaust port. This paper proposes the use of artificial neural networks (ANNs) to predict inside air temperature of a pillar cooler. For this purpose, at first, three statistically significant factors (outside temperature, airing and watering) influencing the inside air temperature of the pillar cooler are identified as input parameters for predicting the output (inside air temperature) and then an ANN was employed to predict the output. In addition, 70%, 15% and 15% data was chosen from a previously obtained data set during the field trial of the pillar cooler for training, testing and validation, respectively, and then an ANN was employed to predict inside air temperature. The training (0.99918), testing (0.99799) and validation errors (0.99432) obtained from the model indicate that the artificial neural network model (NARX) may be used to predict inside air temperature of pillar cooler. This study reveals that, an ANN approach can be used successfully for predicting the performance of pillar cooler.