Biogeochemical model (BGC-ES) and its basin-level application for evaluating ecosystem services under forest management practices

It is important for humans to live in harmony with ecosystems. Evaluation of ecosystem services (ES) may be helpful in achieving this objective. In Japan, forest ecosystems need to be re-evaluated to prevent their degradation due to lack of forest management.In order to evaluate the effects of forest management on forest ES, we developed a process-based biogeochemical model to estimate water, carbon, and nitrogen cycles in forest ecosystems (BGC-ES). This model consists of four submodels: biomass, water cycle, carbon-nitrogen (CN) cycles, and forest management. The biomass submodel can calculate growth of forest biomass under forest managements.Several parameters of the model were calibrated using data from observations of evapotranspiration flux and quality of stream flow in forests. The model results were compared with observations of runoff water from a dam catchment site and with carbon flux observations.Our model was coupled with a basin-level GIS database of forests. Evaluations under various forest management scenarios were carried out for forests in a basin contained in the Ise Bay basin (Chubu region, Japan), where plantations (artificial forests) seemed to have degraded from poor forest management.Comparing our simulation results with those of forests without management in the basin, we found that the amounts of absorbed carbon and runoff were larger in managed forests. In addition, the volume of harvested timber was larger and its quality (diameter) was better in managed forests. Changes of ES within the various scenarios were estimated for their economic value and were compared with the cost of forest management.     

Organizational issues for disseminating recycling technologies of carbon fiber-reinforced plastics in the Japanese industrial landscape

Journal of Material Cycles and Waste Management - Carbon fiber-reinforced plastics (CFRP) are used for structural materials in the aircraft and automotive industries due to their lightweight and...     

Comparison of the changes in temperatures among rural, urban and metropolitan areas around the Inland Sea in Japan

We investigated the changes in temperatures in Takamatsu, Tadotsu and Osaka areas in Japan. Data of temperatures in Takamatsu (urban area: 1942-2009), Tadotsu (rural area: 1893-2009) and Osaka (metropolitan area: 1883-2009) areas around the Inland Sea in Japan was obtained from Japan Meteorological Agency. The changes in temperatures in three areas in Japan were analyzed and compared. By using data from 1942 to 2009, various parameters of temperatures were significantly correlated with years. The changes in mean temperature in August and in a year in Takamatsu area for 50 years were highest (August: 1.6°C, Year: 1.8°C) among three areas. In addition, correlation coefficient rate between years and the number of days over the level of 34°C in August in Takamatsu area was highest (r = 0.567, p < 0.0001). Parameters of temperatures were gradually increased with years in all three areas. The heat island effect in Takamatsu area was similar to Osaka area in Japan.     

Hydroponic technique using waste concrete and ferronickel slag instead of fertilizer

Journal of Material Cycles and Waste Management - This paper presents whether some minerals in waste concrete and ferronickel slag are available for hydroponics instead of commercial fertilizer....     

Influence of physical properties of ammonium nitrate on the detonation behaviour of ANFO

In order to obtain a better understanding of the non-ideal detonation behaviour of ammonium nitrate based explosives, detonation velocities of ANFO (ammonium nitrate and fuel oil) prepared with different kinds of ammonium nitrate (AN) were measured in steel tubes. In this series of test six kinds of AN were used and the influence of the pore diameter, the pore volume and the particle diameter of the AN particle on the detonation velocity of ANFO was investigated.

It was found that the pore diameter and the pore volume had a strong influence on the detonation velocities of ANFO. In the case of ANFO samples which were prepared with AN that had the same pore diameter and the pore volume, when tested the highest detonation velocity (3.85 km/s) was observed when the smallest particle diameter (<0.85 mm) was used. This value corresponded to 75% of the ideal detonation velocity, which was theoretically predicted by the CHEETAH code with the JCZ3-EOS.

The 12 months aging showed the change of the detonation velocities of ANFO and the reaction of ANFO was influenced both by the physical and the chemical properties of AN particles and oil during the storage period.     

The sorption of heavy metal species by sediments in soakaways receiving urban road runoff

Infiltration facilities are designed for both the retention of non-point pollutants and the replenishment of groundwater in urban areas. In this study, sorption tests were conducted to evaluate the speciation of heavy metals and their behaviour in infiltration facilities receiving urban road runoff containing high DOC concentrations and stable heavy metal organic complexes. Road dust and three soakaway sediments were collected from heavy traffic areas and a residential area with an infiltration-type sewerage system in Tokyo, Japan. Sequential multiple batch tests were conducted by adding prepared road dust leachate (artificial road runoff) or deionised water to soakaway sediment to obtain soakaway sediment leachate (artificial percolating water from soakaway sediment), which mimicked the sorption by sediments in soakaways receiving urban road runoff. Heavy metal speciation was assessed by means of a combination of anion-exchange resin measurements and MINTEQA2 model calculations, and further validated by chelating resin measurements. In road dust leachates and soakaway sediment leachates, Cu predominantly existed as organic complexes and carbonates, whereas most Mn, Zn and Cd were found to exist in the form of free ions and carbonate complexes. Stable organic complexes of Cu in road dust leachates were strongly adsorbed by soakaway sediments despite the limited adsorption of DOC. On the other hand, desorption of free Mn, Zn and Cd ions from the sediment receiving road dust leachates was observed, indicating that heavy metals such as Mn, Zn and Cd may ultimately reach groundwater as free ions.     

Development of a Practical Method to Detect Noroviruses Contamination in Composite Meals

Various methods to detect foodborne viruses including norovirus (NoV) in contaminated food have been developed. However, a practical method suitable for routine examination that can be applied for the detection of NoVs in oily, fatty, or emulsive food has not been established. In this study, we developed a new extraction and concentration method for detecting NoVs in contaminated composite meals. We spiked NoV-GI.4 or -GII.4 stool suspension into potato salad and stir-fried noodles. The food samples were suspended in homogenizing buffer and centrifuged to obtain a food emulsion. Then, anti-NoV-GI.4 or anti-NoV-GII.4 rabbit serum raised against recombinant virus-like particles or commercially available human gamma globulin and Staphylococcus aureus fixed with formalin as a source of protein A were added to the food emulsion. NoV-IgG-protein A-containing bacterial complexes were collected by centrifugation, and viral RNA was extracted. The detection limits of NoV RNA were 10–35 copies/g food for spiked NoVs in potato salad and stir-fried noodles. Human gamma globulin could also concentrate other NoV genotypes as well as other foodborne viruses, including sapovirus, hepatitis A virus, and adenovirus. This newly developed method can be used as to identify NoV contamination in composite foods and is also possibly applicable to other foodborne viruses.     

Simultaneous removal of dissolved organic matter and bromide from drinking water source by anion exchange resins for controlling disinfection by-products

Anion exchange resins （AERs） with different properties were evaluated for their ability to remove dissolved organic matter （DOM） and bromide, and to reduce disinfection by-product （DBP） formation potentials of water collected from a eutrophic surface water source in Japan. DOM and bromide were simultaneously removed by all selected AERs in batch adsorption experiments. A polyacrylic magnetic ion exchange resin （MIEX） showed faster dissolved organic carbon （DOC） removal than other AERs because it had the smallest resin bead size. Aromatic DOM fractions with molecular weight larger than 1600 Da and fluorescent organic fractions of fulvic acid- and humic acid-like compounds were efficiently removed by all AERs. Polystyrene AERs were more effective in bromide removal than polyacrylic AERs. This result implied that the properties of AERs, i.e. material and resin size, influenced not only DOM removal but also bromide removal efficiency, MIEX showed significant chlorinated DBP removal because it had the highest DOC removal within 30 rain, whereas polystyrene AERs efficiently removed brominated DBPs, especially brominated trihalomethane species. The results suggested that, depending on source water DOM and bromide concentration, selecting a suitable AER is a key factor in effective control of chlorinated and brominated DBPs in drinking water.     

Environmental impact evaluation of feeds prepared from food residues using life cycle assessment

There is increasing concern about feeds prepared from food residues (FFR) from an environmental viewpoint; however, various forms of energy are consumed in the production of FFR. Environmental impacts of three scenarios were therefore investigated and compared using life cycle assessment (LCA): production of liquid FFR by sterilization with heat (LQ), production of dehydrated FFR by dehydration (DH), and disposal of food residues by incineration (IC). The functional unit was defined as 1 kg dry matter of produced feed standardized to a fixed energy content. The system boundaries included collection of food residues and production of feed from food residues. In IC, food residues are incinerated as waste, and thus the impacts of production and transportation of commercial concentrate feeds equivalent to the FFR in the other scenarios are included in the analysis. Our results suggested that the average amounts of greenhouse gas (GHG) emissions from LQ, DH, and IC were 268, 1073, and 1066 g of CO(2) equivalent, respectively. The amount of GHG emissions from LQ was remarkably small, indicating that LQ was effective for reducing the environmental impact of animal production. Although the average amount of GHG emissions from DH was nearly equal to that from IC, a large variation of GHG emissions was observed among the DH units. The energy consumption of the three scenarios followed a pattern similar to that of GHG emissions. The water consumption of the FFR-producing units was remarkably smaller than that of IC due to the large volumes of water consumed in forage crop production.     

Remediation of cadmium contamination in paddy soils by washing with chemicals: selection of washing chemicals

The efficiencies of neutral salts, strong acids, and chelates were tested for extracting cadmium (Cd) from three paddy soils. The higher the selectivity of the cations of the added neutral salts toward soil adsorption sites, the lower the pH in the extracts and the more soil Cd could be extracted. In addition, soil carbon and nitrogen contents and mineral composition were closely associated with the amount of Cd extracted. Calcium chloride and iron(III) chloride were selected as wash chemicals to restore Cd-contaminated paddy soils in situ. Washing with calcium chloride led to the formation of Cd chloride complexes, enhancing Cd extraction from the soils. The washing also substantially decreased soil levels of exchangeable and acid-soluble Cd, which are the major forms of bioavailable Cd for rice (Oryza sativa L.). The optimum conditions for in situ soil washing were also determined for calcium chloride.