Probabilistic fugacity analysis of Lake Pontchartrain pollution after Hurricane Katrina

After Hurricane Katrina passed through the US Gulf Coast in August 2005, floodwaters covering New Orleans were pumped into Lake Pontchartrain as part of the rehabilitation process in order to make the city habitable again. The long-term consequences of this environmentally critical decision were difficult to assess at the time and were left to observation. In the aftermath of these natural disasters, and in cases of emergency, the proactive use of screening level models may prove to be an important factor in making appropriate decisions to identify cost effective and environmentally friendly mitigation solutions. In this paper, we propose such a model and demonstrate its use through the application of several hypothetical scenarios to examine the likely response of Lake Pontchartrain to the contaminant loading that were possibly in the New Orleans floodwaters. For this purpose, an unsteady-state fugacity model was developed in order to examine the environmental effects of contaminants with different physicochemical characteristics on Lake Pontchartrain. The three representative contaminants selected for this purpose are benzene, atrazine, and polychlorinated biphenyls (PCBs). The proposed approach yields continuous fugacity values for contaminants in the water, air, and sediment compartments of the lake system which are analogous to concentrations. Since contaminant data for the floodwaters are limited, an uncertainty analysis was also performed in this study. The effects of uncertainty in the model parameters were investigated through Monte Carlo analysis. Results indicate that the acceptable recovery of Lake Pontchartrain will require a long period of time. The computed time range for the levels of the three contaminants considered in this study to decrease to maximum contaminant levels (MCLs) is about 1 year to 68 years. The model can be implemented to assess the possible extent of damage inflicted by any storm event on the natural water resources of Southern Louisiana or similar environments elsewhere. Furthermore, the model developed can be used as a useful decision-making tool for planning and remediation in similar emergency situations by examining various potential contamination scenarios and their consequences.     

Vegetation as an Indicator of Soil Properties and Water Quality in the Akarçay Stream (Turkey)

In this study, the relationship among water quality, soil properties, and plant coverage in the region of the Akarçay stream was examined. Correlation analyses were carried out between soil samples taken from each of four plant communities in the Akarçay basin and water in the Akarçay stream. The four plant communities in the study area are as follows: Limonium lilacinum (Boiss. et Bal.) Wag., Alhagi pseudalhagi (M. Bieb.) Desv. Peganum harmala L., and Hordeum marinum Huds. subsp. marinum. B, Cl, EC, K, Mg, Na, pH, and SO₄ data from both soil and water samples were subjected to statistical analysis, and significant correlations were obtained (p < 0.05). These correlations indicated that the chemical features of the soil had a major effect on water quality. The important parameters were B, Cl, EC, K, Mg, Na, pH, and SO₄ for Limonium lilacinum communities; Ca, K, and pV for Peganum harmala; and B, Cl, Mg, pH, and pV for Alhagi pseudalhagi. There were also statistically significant relationships (p < 0.05) among the parameters examined. These findings strongly suggested that these plant communities can be used as indicators for soil chemistry and water quality.     

PCB mass transfer coefficients determined by application of a water surface sampler

A water surface sampler (WSS) was employed in combination with greased surface deposition plates (GSDPs) to measure the particulate dry deposition and gas exchange of polychlorinated biphenyls (PCBs) in Chicago, IL. Vapor phase PCB fluxes were calculated by subtracting the particulate fluxes obtained from GSDPs from total (particulate+gas) fluxes obtained from the WSS. Vapor phase PCB fluxes were divided by ambient air concentrations measured with a high volume sampler to calculate overall gas phase PCB mass transfer coefficients (K(G)). The calculated average PCB MTC was 0.54+/-0.47 cm s(-1). This experimentally determined average gas phase overall mass transfer coefficient, K(G), agreed well with the ones reported from studies using similar techniques and agreed well with modeled values obtained using MTC correlations developed for the WSS.     

Solid phase extraction of gold(III) on Amberlite XAD-2000 prior to its flame atomic absorption spectrometric determination

A solid phase extraction method for the determination of gold(III) at trace levels by flame atomic absorption spectrometer (FAAS) was developed. The method was based on retention of gold as chloro complexes through the Amberlite XAD-2000. The effect of some analytical parameters including hydrochloric acid concentration, sample volume, sample and eluent flow rates, eluent volume, eluent concentration and interfering ions on the recovery of gold(III) was investigated. The retention of gold(III) from 1.5 mol l⁻¹ HCl solution and the recovery of gold with 0.07 mol l⁻¹ NH₃ solution were quantitative (≥95%). The relative standard deviation (RSD) was calculated as 3.2% (n = 10). The detection limit for gold was 2 μg l⁻¹. The accuracy was checked with the determination of gold spiked an artificial seawater and a pure copper samples.     

Contamination levels of selected organochlorine and organophosphate pesticides in the Selangor River, Malaysia between 2002 and 2003

In Malaysia, rivers are the main source of public water supplies. This study was conducted from 2002 to 2003 to determine the levels of selected organochlorine and organophosphate pesticides in the Selangor River in Malaysia. Surface water samples have been collected seasonally from nine sites along the river. A liquid-liquid extraction followed by gas chromatography-mass spectrometry technique was used to determine the trace levels of these pesticide residues. The organochlorine pesticides detected were lindane, heptachlor, endosulfan, dieldrin, endosulfan sulfate, o,p'-DDT, p,p'-DDT, o,p'-DDE and p,p'-DDE whereas for organophosphate pesticides, they were chlorpyrifos and diazinon. At the river upstream where a dam is located for public water supply, incidents of pesticide levels exceeding the European Economic Community Directive of water quality standards have occurred. Furthermore, the wetland ecosystems located at the downstream of the river which houses the fireflies community is being threatened by occasional pesticide levels above EPA limits for freshwater aquatic organisms. The occurrence of these residual pesticides in the Selangor River can be attributed to the intense agriculture and urban activity.     

Uptake of Ni2+ and rhodamine B by nano-hydroxyapatite/alginate composite beads: batch and continuous-flow systems

Alginate encapsulated nano-hydroxyapatite beads were synthesized and characterized by Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller surface analysis, and X-ray diffraction. Their adsorptive potential for Ni²⁺ and rhodamine B was explored in batch mode and by fixed-bed column passage. In the batch system, maximum uptake capacity for Ni²⁺ was 360 mg g^?1 and 480 mg g^?1 for rhodamine B. In the presence of humic acid, sorption was enhanced. For the continuous-flow system, adsorption was effective at low flow rate. For both pollutants, mass transport resistance increased during adsorption. The overall rates of rhodamine B and Ni²⁺ uptake were found to be controlled by external mass transfer.     

Determination of heavy metals in lower Sakarya river sediments using a BCR-sequential extraction procedure

A BCR-sequential extraction procedure for the determination of extractable heavy metals was applied to sediments of various rivers and lakes. There are many rivers basins in Turkey. Sakarya River Basin is one of the most important basins, which consists of three parts: Upper, Middle and Lower Sakarya River Basins. In this study, the Lower Sakarya River was selected as the study area for sediments. The samples were collected monthly from 10 pre-determined stations through the river for 10 months time and analysed for the distribution of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn elements. The determination of extractable heavy metals in sediments was carried out by using Flame Atomic Absorption Spectrometer. The validation of the results was performed by the analysis of a BCR 701 standard reference material.     

Protective effect of gamma-oryzanol against manganese-induced toxicity in Drosophila melanogaster

Environmental Science and Pollution Research - Manganese (Mn) is an essential element that, in excess, seems to be involved in the development of different neurodegenerative conditions....     

Influence of pyrolysis temperature on production and nutrient properties of wastewater sludge biochar

The important challenge for effective management of wastewater sludge materials in an environmentally and economically acceptable way can be addressed through pyrolytic conversion of the sludge to biochar and agricultural applications of the biochar. The aim of this work is to investigate the influence of pyrolysis temperature on production of wastewater sludge biochar and evaluate the properties required for agronomic applications. Wastewater sludge collected from an urban wastewater treatment plant was pyrolysed in a laboratory scale reactor. It was found that by increasing the pyrolysis temperature (over the range from 300 °C to 700 °C) the yield of biochar decreased. Biochar produced at low temperature was acidic whereas at high temperature it was alkaline in nature. The concentration of nitrogen was found to decrease while micronutrients increased with increasing temperature. Concentrations of trace metals present in wastewater sludge varied with temperature and were found to primarily enriched in the biochar.