高分辨率降水氧氘同位素变化及洞穴水响应:以河南鸡冠洞为例

大气降水稳定同位素受温度、雨量、海拔高程、水汽源等多种因素控制,进而影响洞穴水及沉积物的同位素变化.为了更好地认识我国南北交汇带季风敏感区洞穴水对降水的响应过程,本研究分析了2015年8月4~6日河南栾川县鸡冠洞强降雨和洞内4处地下水点样品,并结合2009~2015年栾川地区近6年大气降水氧氘同位素数据研究发现:1采用HYSPLIT模型可以将鸡冠洞强降雨划分为不同水汽来源的2个阶段:高空来自南中国海的水汽以及近地面来自内陆局地蒸发的水汽,并且可以记录在单场降雨期间雨水的δ~(18)O变化特征上.2近地面来自内陆局地蒸发水汽的蒸发过程一定程度上掩盖了温度效应,并使局地大气降水线的斜率、截距和雨水过量氘均减小.3此次降雨期间鸡冠洞洞穴滴水δ~(18)O特征主要响应夏季风海源水汽的降水;鸡冠洞洞穴滴水对降雨响应最快,间隔时间约为3 h,滴水δ~(18)O随滴率升高变重,之后缓慢变轻;地下河具有相似的模式,稍有滞后;靠近洞口的池水反映出不同阶段的雨水δ~(18)O变化的差异.     

重金属对秀丽隐杆线虫繁殖的影响

为了探究重金属单独及联合暴露对秀丽隐杆线虫(Caenorhabditis elegans)繁殖的影响及其作用机制,采用96孔板液相暴露试验,以环境相关浓度(0.1~50.0 μg/L)的Cd、Hg、Pb暴露同步化处理秀丽隐杆线虫,24 h后统计其怀卵数及阴门畸形率,以及连续记录72 h内子一代秀丽隐杆线虫的个体数,最后利用2×2析因设计方差分析阐明重金属的两两联合作用模式. 结果表明:与对照组相比,Cd、Hg、Pb单独及联合暴露对秀丽隐杆线虫的繁殖具有显著抑制作用,ρ(Cd)为50.0 μg/L、ρ(Hg)为10.0 μg/L、ρ(Pb)为50.0 μg/L暴露组秀丽隐杆线虫子一代数量分别降低了43.5%、33.8%、51.0%;Cd-Hg暴露组〔当ρ(Cd)、ρ(Hg)分别为50.0、10.0 μg/L时〕、Hg-Pb暴露组〔当ρ(Hg)、ρ(Pb)分别为10.0、50.0 μg/L时〕、Cd-Pb暴露组〔当ρ(Cd)、ρ(Pb)分别为50.0、50.0 μg/L时〕秀丽隐杆线虫子一代个体数分别降低了44.7%、61.0%、53.3%. 进一步研究发现,Cd、Hg、Pb单独及联合暴露会引起秀丽隐杆线虫子宫内受精卵数量降低以及产卵器阴门结构畸形率升高. 2×2析因设计方差分析结果发现,Cd、Hg、Pb两两联合暴露对秀丽隐杆线虫的繁殖表现为没有交互作用或者交互方式为拮抗. 研究显示,秀丽隐杆线虫子宫内怀卵数的降低是其子一代数量显著减少的主要原因,而阴门结构的损伤可能使产卵行为受损,从而进一步加剧重金属对秀丽隐杆线虫繁殖的抑制作用.      

Building regional priorities in forests for development and adaptation to climate change in the Congo Basin

Indentifying common priorities in shared natural resource systems constitutes an important platform for implementing adaptation and a major step in sharing a common responsibility in addressing climate change. Predominated by discourses on REDD + (Reduced Emissions from Deforestation and Forest Degradation and conservation, sustainable management of forests and enhancement of forest carbon stocks in developing countries) with little emphasis on adaptation there is a risk of lack of policy measures in addressing climate change in the Congo Basin. Forest products and ecosystem services provide security portfolios for the predominantly rural communities, and play major roles in national development programmes in both revenue and employment opportunities. Thus, raising the profile of forests in the policy arena especially in the twin roles of addressing climate change in mitigation and adaptation and achieving resilient development is crucial. Within the framework of the Congo Basin Forests and Climate Change Adaptation project (COFCCA) project, science policy dialogue was conducted to identify and prioritize forest based sectors vulnerable to climate change but important to household livelihoods and national development. The goal of the prioritization process was for the development of intervention in forest as measures for climate change adaptation in Central Africa. Participants constituted a wide range of stakeholders (government, Non Governmental Organizations, research institutions, universities, community leaders, private sectors etc.) as representatives from three countries directly involved in the project: Cameroon, Central African Republic and Democratic Republic of Congo. Building on national priorities, four forest related sectors were identified as common priorities at the regional level for focus on climate change adaptation. These sectors included: (1) energy with emphasis on fuel wood and Charcoal; (2) Water principally quality, quantity, accessibility, etc.; (3) Food with emphasis on Non Timber Forest Products, and (4) Health linked to healthcare products (medicinal plants). Using these prioritized sectors, the project focused on addressing the impacts of climate change on local communities and the development of adaptation strategies in the three pilot countries of the Congo Basin region. The four sectors constitute the key for development in the region and equally considered as priority sectors in the poverty reduction papers. Focused research on these sectors can help to inject the role of forests in national and local development and their potentials contributions to climate change adaptation in national and public discourses. Mainstreaming forest for climate change adaptation into national development planning is the key to improve policy coherence and effectiveness in forest management in the region.     

NdFeB磁体表面环保型Zn-Al涂层的盐雾腐蚀行为

目的 研究NdFeB磁体表面环保型Zn-Al涂层在盐雾环境中的腐蚀行为。方法 采用SEM、XRD、EDS、拉曼光谱、傅里叶变换红外光谱等对Zn-Al涂层的形貌、物相、成分结构进行分析。通过电化学曲线探究Zn-Al涂层在盐雾环境中的腐蚀机理。结果 在NdFeB磁体表面制备的环保型Zn-Al涂层的耐盐雾腐蚀时间不少于1 000 h。在盐雾腐蚀环境中,Zn-Al涂层表面逐渐被白锈覆盖,失去金属光泽,腐蚀至1 126 h时,Zn-Al涂层表面出现红色锈点,涂层微观组织呈蜂窝状结构,并出现微裂纹。腐蚀产物由Zn_(5)(OH)_(8)Cl_(2)·H_(2)O、Al_(9)SiAl_(12)(OH)_(18)(AlO_(4))(Si_(5)O_(16))Cl、Fe_(2)O_(3)和极少量的Zn、Al组成。腐蚀前期,Zn-Al涂层表面的钝化膜、硅烷膜起保护作用;随腐蚀进行,膜层破坏暴露出片状金属粉,金属粉活化,涂层发挥牺牲阳极保护作用;腐蚀后期,腐蚀介质通过涂层微裂纹穿透涂层至磁体,涂层牺牲阳极的保护作用和物理屏蔽保护作用显著减弱,直至失效。结论 环保型Zn-Al涂层可显著提高NdFeB磁体的耐中性盐雾腐蚀性能。     

European scale application of atmospheric reactive nitrogen measurements in a low-cost approach to infer dry deposition fluxes

A European scale network was established in 2006 as part of the NitroEurope Integrated Project to infer reactive nitrogen (Nr) dry deposition fluxes, based on low-cost sampling of gaseous and aerosol species and inferential modelling. The network provides monthly measurements of NH₃, NH₄⁺, HNO₃ and NO₃⁻, as well as SO₂, SO₄²⁻, HCl, Cl⁻ and base cations at 58 sites. Measurements are made with an established low-cost denuder methodology (DELTA) as a basis to: (1) examine temporal trends and spatial patterns across Europe, (2) improve and calibrate inferential modelling techniques to estimate exchange of Nr species, (3) provide best estimates of atmospheric dry N deposition, and (4) permit an analysis of net GHG exchange in relation to atmospheric and agricultural N inputs at the European scale. Responsibility for measurements is shared among seven European laboratories. An inter-comparison of the DELTA implementation by 6 laboratories at 4 test sites (Montelibretti, Italy; Braunschweig, Germany; Paterna, Spain and Auchencorth, UK) from July to October 2006 provided training for the laboratories and showed that good agreement was achieved in different climatic conditions (87% of laboratory site-means within 20% of the inter-laboratory median). Results obtained from the first year of measurements show substantial spatial variability in atmospheric Nr concentrations, illustrating the major local (NH₃) and regional (HNO₃, NO₃⁻, and NH₄⁺) differences in Nr concentrations. These results provide the basis to develop future estimates of site-based Nr dry deposition fluxes across Europe, and highlight the role of NH₃, largely of agricultural origin, which was the largest single constituent and will dominate dry Nr fluxes at most sites.     

Potential of surplus biomass gasifier based power generation: A case study of an Indian state Rajasthan

Facing the finiteness of fossil fuels and its associated environmental problems, new prospects to cover energy demand are urgently required. Energy from surplus biomass can support an essential contribution to a sustainable energy generation. This paper deals with a case study of surplus biomass available in the Indian state Rajasthan. About 1275 MW electrical power is possible to generate through biomass gasifier based power generation plant through surplus biomass available in Rajasthan. About 1656 tonnes of CO₂ can be saved annually by installation of 1 MW biomass gasifier based power plant. The techno economic parameter like net present worth, cost benefit ratio and pay back period are also carried out for this route of power generation and these are about 1.18 million US$, 1.42 and 8 years and 2 months respectively.     

Soil microbial response to herbicides applied to glyphosate-resistant canola

Adoption of glyphosate-resistant canola (Brassica napus L.) has increased glyphosate applications to this crop, and concerns have been raised about unintended consequences of these multiple applications. A field trial was conducted to evaluate the effects of pre-seed and in-crop glyphosate and alternative herbicides on soil microbial community functional structure, diversity and biomass. Pre-seed treatments were 2,4-D, glyphosate and 2,4-D + glyphosate, and in-crop treatments were glyphosate applied once, glyphosate applied twice, ethalfluralin, ethalfluralin + sethoxydim + ethametsulfuron + clopyralid, and sethoxydim + ethametsulfuron. Rhizosphere and bulk soil was collected at flowering stage of canola and analyzed for bacterial community-level substrate utilization patterns and microbial biomass C (MBC). Where differences were significant, pre-seed application of both 2,4-D and glyphosate altered the functional structure and reduced the functional diversity of soil bacteria, but increased MBC. These effects were not necessarily concurrent. The reduction in functional diversity was due to reduction in evenness, which means that the soil where both pre-seed herbicides had been applied was dominated by only few functional groups. In 1 year, two in-crop applications of glyphosate also reduced the functional diversity of soil bacteria when applied after pre-seed 2,4-D, as did in-crop sethoxydim + ethametsulfuron following pre-seed glyphosate. Even though significant differences between herbicides were fewer than non-significant differences, i.e., there were no changes in soil microbial community structure, diversity or biomass in response to glyphosate or alternative herbicides applied to glyphosate-resistant canola in most cases, the observed changes in soil microbial communities could affect soil food webs and biological processes.     

Initiating automotive component reuse in Malaysia

As the production of local vehicles increases, the impact of end-of-life vehicles (ELVs) wastes to the environment will also increase. ELVs recovery including reuse, remanufacture, and recycle apparently become a strategy in solving this environmental problem. This study identifies the existing conditions of automotive reuse in Malaysia by conducting some interviews in selected local automotive and automotive component manufacturers. Results from the interviews indicated that reuse of automotive components in newly manufactured vehicles has never been practiced by the selected companies. However, there is interest among respondents in developing automotive components for after-market reuse. Some strategies were proposed in this study to initiate automotive components reuse in the local automotive manufacturers including the establishment of the end-of-life directive, enhance research and development on design for reuse and increase reusability and economic benefits of reuse.     

Ingredients in sustainably managing water in semi-arid environments

The lessons learned from CALFED indicate that ingredients important in the long-term resolution of water management issues may not result in short-term “solutions”. The value of this special issue lies in its identification of ingredients that stimulate re-framing of issues, adapting to new knowledge and innovative decisions. But sustainable water management also requires the political patience to sustain those processes as a means of perpetuating the long-term decision-making necessary to anticipate and/or respond to an ever-changing environment.