Factor analysis of essential and toxic elements in human placentas from deliveries in arctic and subarctic areas of Russia and Norway

Concentrations in human placenta of 11 essential elements (P, Ca, Mg, Cu, S, Na, Fe, Zn, K, Se, Mn) and 5 toxic elements (Ba, Sr, Pb, Ni, Cd) are compared for each of two arctic communities in eastern Norway and western Russia, and for another in each country located at more southerly latitudes. All but Mg, Fe, P and K were present in higher concentrations in the Russian study group. The observed inter-element correlations are reflected by the four major factors identified in a principal component analysis. The total variation explained was 67.3%, of which more than half (35.3%) was contributed by Factor 1. P, Ca, Mg, Ba, Sr, Pb, and Ni were major contributors to this factor. The placental concentrations of these elements depended strongly on gestational age, increasing from about week 35 and peaking near weeks 39 and 40, and exhibited skewed frequency distributions and a dependence on maternal smoking. The gestational-dependent mineralization of the placenta is interpreted to reflect the deposition of metal phosphates coinciding with smoking-induced tissue damage. The loadings of the remaining three factors are reviewed in the context of common uptake mechanisms, similar biochemistries and unique transport pathways. The inter-element relationships and grouping of the elements observed should constitute a scientific base for the use of placenta composition in environmental monitoring and epidemiological studies.     

Characterisation of mineralogical forms of barium and trace heavy metal impurities in commercial barytes by EPMA, XRD and ICP-MS

This study was carried out to characterise the mineralogical forms of barium and the trace heavy metal impurities in commercial barytes of different origins using electron probe microanalysis (EPMA), X-ray diffraction (XRD) and inductively coupled plasma mass spectrometry (ICP-MS). Qualitative EPMA results show the presence of typically eight different minerals in commercial barytes including barite (BaSO4), barium feldspar, galena (PbS), pyrite (FeS2), sphalerite (ZnS), quartz (SiO2), and silicates, etc. Quantitative EPMA confirms that the barite crystals in the barytes contain some strontium and a little calcium, whereas trace heavy metals occur in the associated minerals. Analysis of aqua regia extracts of barytes samples by ICP-MS has shown the presence of a large number of elements in the associated minerals. Arsenic, copper and zinc concentrations correlate closely in all 10 samples. The findings suggest that barytes is not, as traditionally thought, an inert mineral, but is a potentially toxic substance due to its associated heavy metal impurities, which can be determined by an aqua regia digest without the need for complete dissolution of the barite itself. X-ray powder diffraction was not informative as the complex barite pattern masks the very weak lines from the small amounts of associated minerals.     

Recycling of petroleum-contaminated sand

The environmental impact of using petroleum-contaminated sand (PCS) as a substitute in asphalt paving mixtures was examined. An appreciable component of PCS is oily sludge, which is found as the dregs in oil storage tanks and is also produced as a result of oil spills on clean sand. The current method for the disposal of oily sludge is land farming. However, this method has not been successful as an oil content of < 1% w/w is required, and difficulty was encountered in reaching this target. The reuse of the sludge in asphalt paving mixtures was therefore considered as an alternative. Standard tests and environmental studies were conducted to establish the integrity of the materials containing the recycled sludge. These included physical and chemical characterization of the sludge itself, and an assessment of the mechanical properties of materials containing 0%, 5%, 22% and 50% oily sludge. The blended mixtures were subjected to special tests, such as Marshall testing and the determination of stability and flow properties. The experimental results indicated that mixtures containing up to 22% oily sludge could meet the necessary criteria for a specific asphalt concrete wearing course or bituminous base course. To maximize the assay from the recycled material, the environmental assessment was restricted to the 50% oily sludge mixture. Leachates associated with this particular mixture were assayed for total organic residue and certain hazardous metal contaminants. The results revealed that the organics were negligible, and the concentrations of the metals were not significant. Thus, no adverse environmental impact should be anticipated from the use of the recycled product. Our research showed that the disposal of oily sludge in asphalt paving mixtures could possibly yield considerable savings per tonne of asphalt concrete, and concurrently minimize any direct impact on the environment.     

Organic contaminants and trace metals in flounder liver and sediment from the Amsterdam and Rotterdam harbours and off the Dutch coast

Organic contaminants [polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), polybrominated diphenylethers (PBDEs), nonylphenols], organotin compounds and trace metals (cadmium, chromium, mercury and zinc) were determined in flounder (Platichthys flesus) liver and sediment from the Amsterdam harbour (North Sea Canal) and Rotterdam harbour (Euromonding) and off the Dutch coast between the Amsterdam and Rotterdam harbour mouths in order to assess the level of contamination in these harbours and to study contamination gradients.     

Chemical monitoring and evaluation of the water quality of the Douro River at the Crestuma-Lever dam

Water taken from the Crestuma-Lever dam on the Douro River was evaluated considering the Portuguese Decree-law no. 236/98 of 1st August, 1998. This paper presents the metrological characteristics, validation of analytical methodologies and the data obtained from seasonal samplings. The test parameters selected are: temperature, pH, chloride, conductivity, carbon dioxide, alkalinity, hardness, oxidability, dissolved oxygen, BOD5, total suspended solids, sulfide, phosphate, silica, ammonium, nitrite, nitrate, sulfate, sodium, potassium, calcium, magnesium, iron, manganese, copper and zinc. From data analysis we can conclude that the water presented the following characteristics: a pH situated in the neutral zone; a median mineralization; a medium hardness; well oxygenated water; and a carbonate hardness exclusively due to bicarbonates. The temperature, pH, dissolved oxygen, ammonia, chlorides, sulfates, copper, zinc and BOD5 were compared with the legal limits presented in annexes XXI and I of Decree-law 236/98. The results relating to total hardness, nitrites, calcium, magnesium, sodium, potassium, aluminium, sulfides and oxidability were compared with the legal values in annex VI as there are no limits relating to these parameters in annexes XXI and I.     

Modelling Water Blending—Sensitivity of Optimal Policies

Water blending is modelled as a combination of a linear program and a stochastic dynamic program. Optimal policies are found for linear and integer-linear formulations using both an expected monetary value and conditional value-at-risk criterion. The sensitivity of these solutions to the discretisation over volume and over time is investigated.     

Adaptation of the BOXURB model in a southeastern European environment: the case of Athens

The present work describes the adaptation and application of an operational air quality forecast model in a net grid of (1 x 1) km(2) emission source resolution, covering the Greater Area of Athens, Greece. The model is used to estimate the hourly concentrations of nitrogen oxides at a receptor grid of 17 monitoring stations for the 10-year period 1995-2004. The analysis reveals that the best model performance occurs under heavy-traffic conditions, whereas in rural and industrial areas, the model performance is worse.     

Cross-border response of mosses to heavy metal atmospheric deposition in Southeastern Bulgaria and European Turkey

First cross-border atmospheric pollution of 11 heavy metals and toxic elements assessed by Hypnum cupressiforme was reported for a part of Southeastern Europe (Southeastern Bulgaria and European Turkey). Moss monitoring technique followed the main requirements of European Moss Survey. Moss samples were collected in April 2006 both in Bulgaria and Turkey. Concentration of Al, As, Cd, Cr, Cu, Fe, Ni, Pb, Sb, V, and Zn were determined by ICP-AES. Interlaboratory parallel calibration (exchanged four moss samples from each country), standard reference moss materials (M2 and M3) results ensured the study. ANOVA showed no differences between measured results in both laboratories at the 99% confidence level. Principle Component Analyze proved two factors: F1 group of Al, As, Cd, Cr, Fe, Ni, and V and F2 of Cu, Pb, and Zn as main atmospheric pollutants. Results obtained showed approximately Cu and Pb high concentrations around Istanbul and Burgas and Zn pollution in Istanbul district. Arsenic cross-border atmospheric pollution in the study area of Southeastern Europe was found.     

Multivariate statistical study of seasonal variation of BTEX in the surface water of Savitri River

Volatile organic compounds (VOCs) analysis was carried out for the surface water of the Savitri river during the period of June 2005 to June 2007. BTEX compounds (Benzene, Toluene, Xylene & Ethyl benzene) were analyzed by using micro extraction technique (Purge & Trap). Concentrations of these BTEX compounds were ranging from 0.1 to 1.5 ppm during sampling period. Higher concentrations of BTEX were found at sampling location VI. Concentration of ethyl benzene was very low as compare to other compounds. However, the concentration of benzene was very high. Seasonal variations in conc. of BTEX compounds were observed and higher concentration was detected during the summer season. Salting-out effect had given higher quantification values. In PCA and PFA, the component loading for all the variables are positively correlated. Death of fishes was observed in the river that is indication of severe pollution problem.     

Fluoride occurrence and assessment of exposure dose of fluoride in shallow aquifers of Makur, Unnao district Uttar Pradesh, India

The water samples from the shallow aquifers of Makur, Unnao district, Uttar Pradesh, was analyzed for fluoride content (F( - )) and other water quality parameters such as pH, EC, CO(3) (2-), HCO(3) (-), Cl( - ), Na( + ), Ca(2 + ), Mg(2 + ) and RSC. It was found that the F( - ) concentration of water varied between 1.05 to 13.9 mgl( - 1) which exceeded the maximum desirable limits of 1.0 mgl( - 1) of F( - ) as laid down by BIS and 68% of water exceeded maximum permissible limits of 1.5 mgl( - 1) as prescribed by WHO. The correlation study of fluoride indicated that F( - ) has a significant (p < 0.05) positive relationship with pH (r = +0.59) and RSC (r = 0.54), while a significant negative correlation with Ca+Mg (r = -0.53) and Mg (r = -0.49). The exposure doses of fluoride in infants was found between 0.35 to 3.26 mg kg( - 1)day( - 1) (if dug well water was used) whereas 0.36 to 4.63 mg kg( - 1)day( - 1) (when shallow hand pumps) The exposure doses of water in case of children (20 kg body weight) varied between 0.157 to 1.47 mg kg( - 1)day( - 1) (for dugwell) and 0.162 to 2.08 mg kg( - 1)day( - 1) (for shallow hand pumps) whereas in case of adults (70 kg body weight), it varied between 0.09 to 0.839 mg kg( - 1)day( - 1) (for dugwell) and 0.092 to 1.19 mg kg( - 1)day( - 1) (shallow hand pumps) which is quite high against the standard value of 0.05 mg/kg/day which is the minimum risk level (MRL) calculated by the Agency for Toxic Substances and Disease Registry (ATSDR). The maximum exposure dose to fluoride for adults in the study area found to be 23.8 times higher than the ATSDR's MRL.