The effects of leachate recirculation with supplemental water addition on methane production and waste decomposition in a simulated tropical landfill

In order to increase methane production efficiency, leachate recirculation is applied in landfills to increase moisture content and circulate organic matter back into the landfill cell. In the case of tropical landfills, where high temperature and evaporation occurs, leachate recirculation may not be enough to maintain the moisture content, therefore supplemental water addition into the cell is an option that could help stabilize moisture levels as well as stimulate biological activity. The objectives of this study were to determine the effects of leachate recirculation and supplemental water addition on municipal solid waste decomposition and methane production in three anaerobic digestion reactors. Anaerobic digestion with leachate recirculation and supplemental water addition showed the highest performance in terms of cumulative methane production and the stabilization period time required. It produced an accumulated methane production of 54.87 l/kg dry weight of MSW at an average rate of 0.58 l/kg dry weight/d and reached the stabilization phase on day 180. The leachate recirculation reactor provided 17.04 l/kg dry weight at a rate of 0.14l/kg dry weight/d and reached the stabilization phase on day 290. The control reactor provided 9.02 l/kg dry weight at a rate of 0.10 l/kg dry weight/d, and reached the stabilization phase on day 270. Increasing the organic loading rate (OLR) after the waste had reached the stabilization phase made it possible to increase the methane content of the gas, the methane production rate, and the COD removal. Comparison of the reactors' efficiencies at maximum OLR (5 kgCOD/m(3)/d) in terms of the methane production rate showed that the reactor using leachate recirculation with supplemental water addition still gave the highest performance (1.56 l/kg dry weight/d), whereas the leachate recirculation reactor and the control reactor provided 0.69 l/kg dry weight/d and 0.43 l/kg dry weight/d, respectively. However, when considering methane composition (average 63.09%) and COD removal (average 90.60%), slight differences were found among these three reactors.     

LEAST COST SOLUTIONS TO THE PROBLEM OF EFFLUENT ABATEMENT IN URBAN SYSTEMS1

ABSTRACT: There is a significant misallocation of resources in the construction and operation of municipal sewage treatment systems in North America. Central to this misallocation is the inadequate evaluation of alternative treatment technologies, alternative distributions of responsibility for waste treatment, and alternative mechanisms for inducing compliance with treatment system requirements. Perverse incentives in the current institutional structure limit the scope of alternatives examined by decisionmakers. Determination of the least cost solution to the problem of urban effluent abatement requires mathematical modeling for the delineation of optimal treatment strategies on a system wide basis. The adoption of modern methods of systems analysis can identify significant opportunities for the reduction of economic waste in the treatment of municipal sewage.     

Treatment of organic aqueous wastes: Wet air oxidation and Wet Peroxide Oxidation

There is growing concern about the problems of waste elimination. We should consider our environment as being borrowed from future generations and refrain from leaving a legacy of problems we are not able to solve. Various oxidation techniques are suited for the elimination of organic aqueous wastes, but because of the environmental drawbacks of incineration, enclosed processes, like liquid phase oxidation should be preferred. Wet air oxidation (WAO) under high temperature (200-325 degrees C) and pressure (50-150 bar) is suited to such liquid wastes and various catalysts, including hydrogen peroxide, can be used in order to increase the efficiency without increasing temperature and pressure. Wet Peroxide Oxidation (WPO) is a similar process. A comparable oxidation efficiency is obtained when using hydrogen peroxide as the oxidising agent instead of oxygen, at a temperature of only 100-120 degrees C. As opposed to WAO, which is capital intensive, WPO needs limited capital but generates higher running costs. The paper reviews the major results obtained for both processes and assesses the field of possible application of each of them. TOC removal efficiencies typically obtained range from 65 to 90% or more for most of the pollutants.     

Processing and Properties of Biopolymer/Polyhydroxyalkanoates Blends

In this paper, the processability and the performance of a biodegradable polymer, Mater-Bi, and of its blends with either a sample of poly (hydroxy alkanoates) (PHA) or with bacterial biomass containing PHAs were compared. Adding PHA or directly the biomass containing it allows improving the processability of the matrix. Moreover, the mechanical behaviour of the systems was compared considering two different preparation methods, namely compression and injection moulding. The injection moulded samples show poorer mechanical performances than those of the compression moulded systems. The impact strength significantly improves when PHA is added while it reduces when bacterial biomass is used instead. In this latter case this was likely due to the easier propagation of micro-cracks during the impact tests.     

Conceptualizing and communicating management effects on forest water quality

We present a framework for evaluating and communicating effects of human activity on water quality in managed forests. The framework is based on the following processes: atmospheric deposition, weathering, accumulation, recirculation and flux. Impairments to water quality are characterized in terms of their extent, longevity and frequency. Impacts are communicated using a “traffic lights” metaphor for characterizing severity of water quality impairments arising from forestry and other anthropogenic pressures. The most serious impairments to water quality in managed boreal forests include (i) forestry activities causing excessive sediment mobilization and extirpation of aquatic species and (ii) other anthropogenic pressures caused by long-range transport of mercury and acidifying pollutants. The framework and tool presented here can help evaluate, summarize and communicate the most important issues in circumstances where land management and other anthropogenic pressures combine to impair water quality and may also assist in implementing the “polluter pays” principle.     

Metals and organic pollutants in snow surrounding an iron factory

To estimate air pollution snow samples were collected in March 2001 at six sites in the vicinity of the Kostomuksha factory in Karelia. Seventy-two chemical elements and more than 200 individual organic compounds were identified by inductively coupled plasma mass spectrometry (ICP-MS) and gas chromatography mass spectrometry (GC-MS). It was found that the levels of Li, B, Al, Fe, Ni, Cu, Zn, Hg, Mn, Mo as well as hydrocarbons, phthalates and phenols exceeded the existing maximum allowable concentrations. A list of toxicants emitted with the factory exhausts and a list of priority pollutants for Kostomuksha were compiled. The impact of the exhausts of the Kostomuksha factory on the environment in Finland is relatively small. Electronic Publication     

Patterns of soil copper contamination and temporal changes in vegetation in the vicinity of a copper rod rolling factory

Patterns of soil copper contamination have been examined in the vicinity of a copper rod rolling plant in Prescot, Merseyside, UK. The site, established in 1975, was found to possess clear patterns of soil copper contamination, with the highest levels of HNO3 and water-extractable fractions encountered in the factory grounds adjacent to the location of the furnace chimney. The majority of the copper had accumulated in the upper soil horizons. The site is surrounded by planted lawns, established at different times after the commissioning of the plant. The species composition of the extant grassland communities, found at sites with differing soil copper levels, was compared to the composition of the original seed mixtures sown at each of ten sites. These surveys clearly showed that different levels of soil copper contamination had produced significant changes in grassland composition with time. At the most polluted site, copper tolerant Agrostis capillaris clones were the main grasses present only two years after the area was sown with a four-species mixture of non-tolerant grass seed. Lolium perenne possessed extreme sensitivity to copper. A number of dicotyledonous species, normally considered sensitive to elevated copper levels, were found to be unaffected where such conditions had arisen after plants had established from seed.     

Radium-226 in water, sediments, and fish from lakes near the city of Elliot Lake, Ontario, Canada

Ra-226 was measured by alpha-emission spectroscopy in water, sediments, and fish (tissues and gut contents), from five lakes in a watershed containing U mining and milling operations at Elliot Lake, Ontario, and from control lakes in an adjacent non-industrialized watershed. Ra-226 transfer parameters from lake water and sediments to fish tissues, and annual intakes by humans consuming fish, were estimated. Mean dissolved 226Ra levels ranged from approximately 76 mBq litre(-1) in water of the most affected lake, to < 10 mBq litre(-1) in control lakes. Levels in summer were consistently higher than in fall or winter; no consistent variation with depth was noted. Sediment levels ranged from approximately 3000 mBq g(-1) dry wt in one study lake to < 100 mBq g(-1) dry wt of sediment in control lakes. Bone 226Ra concentrations were higher than in muscle. The lake trout (Salvelinus namaycush), a predatory secondary consumer, had bone 226Ra levels (< 20 mBq g(-1) dry wt) that did not show significant site variation. In contrast, bottom feeding whitefish had significantly more 226Ra in bone tissue (to 38 mBq g(-1) dry wt in the lake whitefish, Coregonus clupeaformis, and 76 mBq g(-1) in round whitefish, Prosopium cylindraceum) in study lakes than in controls (< 20 mBq g(-1) dry wt). Ra-226 levels in lake trout muscle were low and showed erratic variation among lakes whereas levels in whitefish muscle did not vary significantly among study and control sites. Lake herring (= cisco, Coregonus artedii), a planktivorous fish taken only from Quirke Lake, had mean 226Ra levels of 18 and 1.4 mBq g(-1) dry wt in bone and muscle, respectively. Gut 226Ra levels, highest in lake trout from McCabe and Quirke Lakes (126 +/- 53, 64 +/- 44 mBq g(-1) dry wt, respectively), and just detectable in McCabe and Elliot Lake whitefish (24 +/- 2, 36 +/- 14 mBq g(-1) dry wt, respectively), were below detection in lake trout and whitefish from other lakes. Concentration ratios (CRs) of 226Ra from water to muscle ranged from 8 to 14 in lake trout, 7 to 14 in whitefish, and 4 to 6 in lake herring. The water to bone CRs varied from 81 to 142, 314 to 548, and 126 to 272 in the same species. CRs were always < 1 between sediments and fish tissues. Annual intake of 226Ra by human consumers of these fish was estimated to provide an effective dose of 0.003 mSv year(-1). This represents a small fraction of both natural background (> 2 mSv year(-1)) and the public dose limit (5 mSv year(-1)).     

Study of the presence of fluorine in the recycled fractions during carbothermal treatment of EAF dust

Carbothermal treatment tests of electric arc furnace dusts (EAFD) using the Waelz kiln process were carried out in pilot-scale for the production of zinc oxide. The association of halides in the EAFD, and the recycled products, such as zinc oxide fumes and high-grade iron contents fractions were examined by X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) analysis. XRD reveals the presence of chlorine and fluorine in the dusts in the form of KCl, NaCl and CaF2. An ultra-pure fraction of zinc was obtained after the Double Leaching Waelz Oxide (DLWO) process was performed on the zinc oxide fumes. The halide contents were reduced to approximately 100 ppm Cl and 700 ppm F. The rest of these elements are in the form of CaF2. About 65% F is volatilised as lead and zinc fluorides, 15% is expected in the magnetic fractions and 20% in non-magnetic fractions as CaF2 and MnF2, respectively.     

Assisted phytostabilization of Pb-spiked soils amended with charcoal and banana compost and vegetated with Ricinus communis L. (Castor bean)

Environmental Geochemistry and Health - A greenhouse experiment was performed to elucidate the potency of Prosopis juliflora charcoal (PJC) and banana waste compost (BWC) to improve soil fertility...