Patterns of soil copper contamination and temporal changes in vegetation in the vicinity of a copper rod rolling factory

Patterns of soil copper contamination have been examined in the vicinity of a copper rod rolling plant in Prescot, Merseyside, UK. The site, established in 1975, was found to possess clear patterns of soil copper contamination, with the highest levels of HNO3 and water-extractable fractions encountered in the factory grounds adjacent to the location of the furnace chimney. The majority of the copper had accumulated in the upper soil horizons. The site is surrounded by planted lawns, established at different times after the commissioning of the plant. The species composition of the extant grassland communities, found at sites with differing soil copper levels, was compared to the composition of the original seed mixtures sown at each of ten sites. These surveys clearly showed that different levels of soil copper contamination had produced significant changes in grassland composition with time. At the most polluted site, copper tolerant Agrostis capillaris clones were the main grasses present only two years after the area was sown with a four-species mixture of non-tolerant grass seed. Lolium perenne possessed extreme sensitivity to copper. A number of dicotyledonous species, normally considered sensitive to elevated copper levels, were found to be unaffected where such conditions had arisen after plants had established from seed.     

Radium-226 in water, sediments, and fish from lakes near the city of Elliot Lake, Ontario, Canada

Ra-226 was measured by alpha-emission spectroscopy in water, sediments, and fish (tissues and gut contents), from five lakes in a watershed containing U mining and milling operations at Elliot Lake, Ontario, and from control lakes in an adjacent non-industrialized watershed. Ra-226 transfer parameters from lake water and sediments to fish tissues, and annual intakes by humans consuming fish, were estimated. Mean dissolved 226Ra levels ranged from approximately 76 mBq litre(-1) in water of the most affected lake, to < 10 mBq litre(-1) in control lakes. Levels in summer were consistently higher than in fall or winter; no consistent variation with depth was noted. Sediment levels ranged from approximately 3000 mBq g(-1) dry wt in one study lake to < 100 mBq g(-1) dry wt of sediment in control lakes. Bone 226Ra concentrations were higher than in muscle. The lake trout (Salvelinus namaycush), a predatory secondary consumer, had bone 226Ra levels (< 20 mBq g(-1) dry wt) that did not show significant site variation. In contrast, bottom feeding whitefish had significantly more 226Ra in bone tissue (to 38 mBq g(-1) dry wt in the lake whitefish, Coregonus clupeaformis, and 76 mBq g(-1) in round whitefish, Prosopium cylindraceum) in study lakes than in controls (< 20 mBq g(-1) dry wt). Ra-226 levels in lake trout muscle were low and showed erratic variation among lakes whereas levels in whitefish muscle did not vary significantly among study and control sites. Lake herring (= cisco, Coregonus artedii), a planktivorous fish taken only from Quirke Lake, had mean 226Ra levels of 18 and 1.4 mBq g(-1) dry wt in bone and muscle, respectively. Gut 226Ra levels, highest in lake trout from McCabe and Quirke Lakes (126 +/- 53, 64 +/- 44 mBq g(-1) dry wt, respectively), and just detectable in McCabe and Elliot Lake whitefish (24 +/- 2, 36 +/- 14 mBq g(-1) dry wt, respectively), were below detection in lake trout and whitefish from other lakes. Concentration ratios (CRs) of 226Ra from water to muscle ranged from 8 to 14 in lake trout, 7 to 14 in whitefish, and 4 to 6 in lake herring. The water to bone CRs varied from 81 to 142, 314 to 548, and 126 to 272 in the same species. CRs were always < 1 between sediments and fish tissues. Annual intake of 226Ra by human consumers of these fish was estimated to provide an effective dose of 0.003 mSv year(-1). This represents a small fraction of both natural background (> 2 mSv year(-1)) and the public dose limit (5 mSv year(-1)).     

Study of the presence of fluorine in the recycled fractions during carbothermal treatment of EAF dust

Carbothermal treatment tests of electric arc furnace dusts (EAFD) using the Waelz kiln process were carried out in pilot-scale for the production of zinc oxide. The association of halides in the EAFD, and the recycled products, such as zinc oxide fumes and high-grade iron contents fractions were examined by X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) analysis. XRD reveals the presence of chlorine and fluorine in the dusts in the form of KCl, NaCl and CaF2. An ultra-pure fraction of zinc was obtained after the Double Leaching Waelz Oxide (DLWO) process was performed on the zinc oxide fumes. The halide contents were reduced to approximately 100 ppm Cl and 700 ppm F. The rest of these elements are in the form of CaF2. About 65% F is volatilised as lead and zinc fluorides, 15% is expected in the magnetic fractions and 20% in non-magnetic fractions as CaF2 and MnF2, respectively.     

Assisted phytostabilization of Pb-spiked soils amended with charcoal and banana compost and vegetated with Ricinus communis L. (Castor bean)

Environmental Geochemistry and Health - A greenhouse experiment was performed to elucidate the potency of Prosopis juliflora charcoal (PJC) and banana waste compost (BWC) to improve soil fertility...     

A closed-chamber CO2-flux method for estimating intertidal primary production and respiration under emersed conditions

This paper describes a closed-chamber method for measuring CO₂ fluxes in intertidal soft sediments during periods of emersion. The method relies on closed-circuit incubations of undisturbed sediment and measurement of CO₂ exchanges using an infrared gas analyser. The method was assessed during field experiments, both in light and dark conditions, on an exposed sandy beach and in an estuary. The rates of gross community production measured under moderate irradiance (4.2 mg C m^-2 h^-1 on the exposed sandy beach and 35 mg C m^-2 h^-1 in the estuary) are in good agreement with rates reported in the literature. In conjunction with appropriate sampling strategies, this method can be useful for estimating and comparing production of intertidal areas or for assessing factors that influence production.     

Zinc-65 specific activities in the migratory pacific hake Merluccius productus

Pacific hake [Merluccius productus (Ayres)], migrating northward along the California coastline during summer, encounter the southwesterly flowing plume of the Columbia River. Radioactive ⁶⁵Zn associated with the plume waters is taken up by the migrating hake. Smaller fish reflect this contamination earlier than larger fish. Zinc-65 specific activities increase toward the north as far as 46°N, off the mouth of the Columbia River, and then decline northward along the coast of Washington.     

Factors affecting TCLP lead leachability from computer CPUs

The factors impacting lead leachability from computer central processing units (CPUs) during the toxicity characteristic leaching procedure (TCLP) were investigated. Several CPUs were disassembled and their component materials were decreased in size to meet the requirements of the TCLP. The impact of CPU composition was examined by leaching different combinations of the CPU components. The ferrous metal content of the mixture greatly impacted lead leaching. TCLP lead concentrations of CPUs predicted by leaching the lead-bearing printed wire boards alone were much greater than those measured when the ferrous metal of the CPU was included in the mixture. The leaching of iron and zinc from the galvanized steel components of the CPU created electrochemical conditions where lead was less soluble. Additional size reduction beyond that required by the TCLP did not result in additional lead leaching. As the volume of head space above the leaching solution increased, the concentration of lead measured increased as well.     

Technological improvements in automotive battery recycling

Recycling of automotive batteries for the recovery of secondary lead is extremely important in Brazil, for the country does not possess large reserves of this metal. Lead is one of the most widely used metals in the world, but it is highly toxic, posing risks for humans and for the environment if not utilized or treated adequately. Industrial waste containing lead in Brazil are classified by the Brazilian Residue Code (NBR—10004:2004) as hazardous. The lead recycling process employed by the recycling industry in Brazil is the pyrometallurgical process in a rotary furnace. This process consists of four stages: (1) grinding of the battery to separate plastic, electrolyte and lead plates; (2) lead reduction in a rotary furnace; (3) separation of metallic lead from slag; and (4) refining of recycled lead. The purpose of this work is to propose process improvements aimed primarily at increasing production output by reducing the loss of lead in slag and particulates, thereby providing a healthier work environment in line with Brazilian environmental and labor laws.