丝素/SiO_2杂化膜固定化多酚氧化酶处理模拟含酚废水

粗马铃薯多酚氧化酶固定于丝素/SiO2杂化膜上,从而得到丝素/SiO2杂化膜固定化多酚氧化酶.并用于处理模拟含酚废水.丝素/SiO2杂化膜在水中的溶失率小于丝素膜在水中的溶失率.所得丝素/SiO2杂化膜固定化多酚氧化酶的最适宜pH为7.4.相对于游离多酚氧化酶.该酶具有较好的热稳定性、贮存稳定性及重复使用性.研究表明,丝素/SiO2杂化膜固定化多酚氧化酶有实际处理含酚废水的可能.     

产朊假丝酵母处理马铃薯淀粉废水

研究了pH、接种量、无机盐(通过加入磷酸二氢钾进行无机盐补充)及DO等对产朊假丝酵母处理马铃薯淀粉废水的影响.结果表明.在pH为5.0、产朊假丝酵母接种量为10%(体积分数)、磷酸二氢钾(质量分散为0.1%)加入量为0.5 g/L、废水不灭菌的条件下,废水处理效果和产朊假丝酵母生长最佳.且当废水COD为5 074 mg/L时,COD去除率达到74.86%,同时可获得2.23g/L的单细胞蛋白.产朊假丝酵母处理马铃薯淀粉废水的最佳条件的实验研究对实现马铃薯淀粉废水资源化利用提供了理论参考.     

Effect of urban morphology on wind condition in idealized city models

Wind conditions in urban environments are important for a number of reasons. They can serve to transport air pollutants out of the urban environment and to moderate urban microclimatic conditions if satisfactory, yet can compromise pedestrian comfort and safety if not. We aim to study experimentally and numerically the effects of urban morphology (e.g., overall city form (skyline), street orientation, and street configuration) on wind conditions in cities. This report considers our initial investigations of two idealized city forms that are coincidentally similar to ancient Roman cities that were organized on one or two primary streets – a main north–south street, the cardus maximus, and a secondary east–west street, the decumanus maximus – and contained within a well-defined perimeter.We first consider round and square city models with one main street set parallel to the approaching wind and a secondary street producing an intersection at city centre. Not surprisingly, wind conditions in the two city models are dissimilar due to their shape differences. We then consider a long rectangular city model with a fully developed steady flow region along the main street. If the main street of the round city model is narrow, the parallel approaching wind cannot blow through the entire street and a penetrating inflow exists at the leeward opening. For the round city model with two crossing streets, a slightly non-parallel wind to the main street generates a stronger wind level in the entire street volume.     

Measurement of gas-phase total peroxides at the summit of Mount Tai in China

Measurement of ambient gas-phase total peroxides was performed at the summit of Mount Tai (Mt. Tai, 1534 m above sea level) in central-eastern China during March 22–April 24 and June 16–July 20, 2007. The hourly averaged concentration of peroxides was 0.17 ppbv (± 0.16 ppbv, maximum: 1.28 ppbv) and 0.55 ppbv (± 0.67 ppbv, maximum: 3.55 ppbv) in the spring and summer campaigns, respectively. The average concentration of peroxides at Mt. Tai, which is in a heavily polluted region, was much lower than hydrogen peroxide measurements made at some rural mountain sites, suggesting that significant removal processes took place in this region. An examination of diurnal variation and a correlation analysis suggest that these removal processes could include chemical suppression of peroxide production due to the scavenging of peroxy and hydroxy radicals by high NO_x, wet removal by clouds/fogs rich in dissolved sulfur dioxide which reacts quickly with peroxides, and photolysis. These sinks competed with photochemical sources of peroxides, resulting in different mean concentrations and diurnal pattern of peroxides in the spring and summer. A principal component analysis was conducted to quantify the major processes that influenced the variation of peroxide concentrations. This analysis shows that in the spring photochemical production was an important source of peroxides, and the major sink was scavenging during upslope transport of polluted and humid air from the lower part of the planetary boundary layer (PBL) and wet removal by synoptic scale clouds. During the summer, highly polluted PBL air (with high NO_x) was often associated with very low peroxides due to the chemical suppression of HO₂ by high NO_x and wet-removal by clouds/fogs in this sulfur-rich atmosphere, especially during the daytime. Higher concentrations of peroxides, which often appeared at mid-nighttime, were mainly associated with subsidence of air masses containing relatively lower concentrations of NO_y.     

不同经济发展阶段区域经济发展差异比较

在介绍区域经济发展阶段各种理论及划分方法的基础上,通过计算1985-2004年间,广西崇左市、安徽滁州市、江苏南通市经济发展的变化轨迹,确定不同区域经济发展阶段.利用偏离-份额分析法对区域经济发展水平进行研究,表明崇左市经济结构较差,结构对于经济增长的贡献小且竞争能力较弱;滁州市经济中增长快的产业部门比重较大,总体经济结构较好,结构对于经济增长具有一定贡献,竞争能力较强;南通市经济中朝阳的、增长快的产业部门比重大,总体经济结构好,结构对于经济增长的贡献大,且各产业部门总的增长势头大,具有很强的竞争能力.建议:①崇左市参与中国-东盟自由贸易区、中越"两廊一圈"经济带以及泛珠三角经济区域,吸收泛珠三角经济区的产业转移,加快发展国际贸易.②滁州市应融入南京都市圈,吸引和承接东部地区的产业转移,注意生态城市建设,发展循环经济,实现经济和生态环境的综合协调发展.③南通市应把资源节约型的增长模式和消费方式作为经济增长方式转变的核心,提升产业的综合竞争力,最终实现经济社会协调发展.     

扬州市城区地表水底泥重金属污染现状与风险评价

对扬州市城区地表水底泥进行等距离布点采样.分析cd、Cu、Pb、Zn 4种重金属的含量,并应用潜在生态危害指数法对重金属潜在生态风险进行了评价.结果表明:4种重金属的潜在生态风险由高到低的顺序为Cd>Pb>Cu>Zn,其中Cd的潜在生态风险程度已达很强;扬州市城区地表水底泥重金属潜在生态风险程度为强.各条河流底泥重金属潜在生态风险程度由强到弱顺序为古运河>二道河>宝带河>小秦淮河>新城河>水院池塘(对照);从空间上看,扬州市城区东部的地表水底泥重金属潜在生态风险程度高于西部,北部高于南部.     

浸提分离法提取皂素清洁工艺研究

提出一种通过溶剂提取将游离皂苷与淀粉、纤维等成分分离,从源头上减少用水量、耗酸量和污染物排放量的皂素清洁生产工艺。首先对溶剂提取条件进行优化,得出最佳工艺条件为：90%（体积比）乙醇溶液,料液比1∶7,沸腾回流提取3 h,重复提取3次。然后通过气质联用（GC/MS）分析了皂素废水的有机物组成。研究结果表明,清洁工艺皂素产率为1.51%（降低3.82%）,用酸量比传统工艺减少了71%,头道液COD浓度降低了46%,每100 g原料排放的COD总量下降了84%;皂素废水的有机物污染物主要为糠醛及其衍生物,清洁工艺废水的有机物含量更低,更易降解。     

微量金属元素及其配合物对厨余垃圾甲烷发酵的影响

生物可利用的微量金属元素不仅能够保证污染物以最大的速率转化,而且还可以使某些特殊的转化得以发生,并提高微生物对有毒污染物质的耐受能力。在研究厨余垃圾总固体浓度(total solid, TS)、接种量和C/N比对厨余垃圾厌氧发酵影响的基础上,重点探讨微量金属元素钴及其配合物丝氨酸对厨余垃圾厌氧发酵甲烷产量及关键酶含量的影响。结果表明,当TS为0.5%、接种污泥量为100 mL/L和C/N比为20∶1时,厨余垃圾厌氧发酵的甲烷产率较高,为367 mL/g COD;添加2 μmol/L的微量金属元素钴-配合物丝氨酸时,甲烷产率则提高到432 mL/g COD,相应地,辅酶M的含量由空白实验的41.21 μmol/g VSS提高到54.64 μmol/g VSS,辅酶F₄₂₀的含量由0.31 μmol/g VSS提高到0.48 μmol/g VSS。     

脂肪酰基氨基酸对矿物润滑油生物降解性的影响研究

通过生物降解试验研究了N-月桂酰基谷氨酸、N-月桂酰基甘氨酸、N-月桂酰基丙氨酸和N-油酰基甘氨酸4种脂肪酰基氨基酸对HVI 350矿物润滑油生物降解性的影响,采用高倍电子显微镜分析了生物降解过程中微生物数量和形态变化。结果表明,在矿物润滑油中添加少量脂肪酰基氨基酸后,矿物润滑油的生物降解性能明显改善,且生物降解过程中微生物数量增多、形态发生变化,这可能是脂肪酰基氨基酸增加了微生物的营养,且具有表面活性,有利于细胞的吸收,从而促进了矿物润滑油生物降解。     

微曝气Fenton氧化法处理模拟双酚A废水的效果及其生物验证

研究了微曝气Fenton氧化法关键工艺参数对模拟双酚A（BPA）废水处理效果的影响,并从活性污泥性质和污染物去除率两方面,采用膜生物反应器(membrane bioreactor, MBR)对微曝气Fenton氧化法的处理效果进行了实验验证,为实现BPA废水的生物处理奠定基础。结果表明,初始pH值、反应时间、H₂O₂/COD(质量浓度比)、H₂O₂/Fe²⁺ (摩尔浓度比)、反应温度及曝气量均对预处理效果有较大影响,在最佳条件下,COD去除率可达70%,BOD/COD值则由原废水的0.02提高到0.50以上。MBR处理上述出水的结果表明,经微曝气Fenton氧化处理BPA的废水,可较好地适应后续的生化处理。