Conductive and convective heat transfer augmentation in flat plate solar collector from energy,economic and environmental perspectives — a comprehensive review

Environmental Science and Pollution Research - The primary objective of the paper is to identify the effective way to enhance the conductive and convective heat transfer of the FPSC. The...     

Nerve conduction studies in sprayers occupationally exposed to mixture of pesticides in a mango plantation at Lucknow,North India

In this study, nerve conduction, organochlorine (OC) pesticide residues in blood and cholinesterase activity levels of pesticide sprayers employed in mango plantations at Lucknow, North India, were determined. Fifty-two sprayers from mango plantations who regularly spray mixture of pesticides like organophosphates (OP), OCs, and carbamates were considered as exposed group. Eighteen subjects with similar socio-economic status of exposed group, who do not handle pesticides, were selected as controls. Questionnaire-based interviews related to personal and occupational histories of the study subjects were carried out. Sprayers did not use any personal protective equipment during pesticide handling. The blood-pesticide analyses of sprayers show higher mean values of hexachlorohexane (HCH), γ-HCH, δ-HCH, total HCH, op-DDT compared with the controls. Acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) activites were significantly reduced among sprayers. Risk of motor nerve conduction deficits was observed in sprayers with low AChE activity. Negative correlation of motor and sensory nerve conduction deficits was observed with the duration of exposure and age among sprayers. The study demonstrated that the prolonged exposure to mixture of pesticides, ergonomic factors, decline in cholinesterase activity may lead to nerve conduction dysfunction. The findings suggest the need for controlled use of pesticides in the plantation and indicated the need for training and implementation of hygiene practices like proper usage of personal protective equipments.     

Sub-lethal effect of chlorpyrifos on protein metabolism of the food fish Clarias batrachus and monitoring of recovery

The effect of sub-lethal concentrations of chlorpyrifos on protein metabolism in physiological important tissues, namely gills, kidney, liver, and muscle of the freshwater fish, Clarias batrachus, was studied. Fish were exposed to 1/20th and 1/10th of 96?h LC₅₀ concentrations for 7, 14, 21, and 28 days. After 28 days of exposure, fish were released into fresh water and kept in the same for 21 days in order to study the recovery. Fish were sacrificed at the stipulated periods and gills, kidney, liver, and muscle tissues were used for the estimation of total protein, amino acids, ammonia, urea, glutamine, protease, transaminases, and phosphatases. Total protein, amino acid, and ammonia contents were decreased in all tissues for 28 days and recovery was observed during the recovery period. Urea and glutamine levels were elevated, except in kidneys, and recovered at the end of the recovery period. The activities of protease, alanine, and aspartate aminotransferases, and acid and alkaline phosphatases were elevated in the tissues for 28 days exposure at both concentrations. Recovery of these enzymes activities was noticed during depuration.     

Plasma lipid profiles and risk of cardiovascular disease on occupational exposure in Karimnagar

Occupational exposure is unregulated in developing countries like India, and becoming the most common cause of disease of environmental origin. The present study was aimed to investigate the effects of occupational exposure on plasma lipid profiles, and risk of cardiovascular diseases. A total of 79 human volunteers were included in the study. Control subjects were healthy housewives of Karimnagar, India. Occupationally exposed individuals included different occupational workers like petrol station attendants, battery chargers, drivers, welders, pesticide-exposed workers, painters, and auto mechanics. These subjects were shown to be chronic occupationally-exposed for at least three years, and neither associated with any other chronic pathological conditions like hypertension or diabetes, nor under any medication other than analgesics during the month preceding the study. Subjects with excessive high or low caloric intake were excluded from the study. Total cholesterol (TC), LDL cholesterol, triglycerides (TG), VLDL cholesterol, LDL/HDL cholesterol, and TC/HDL ratio in these subjects were significantly higher than those in control subjects, whereas HDL cholesterol was not markedly affected. Blood pressure (systolic and diastolic), and other anthropometric parameters (body mass index (BMI), body fat index (BFI), body surface area (BSA)) were not significantly different between groups. Data suggest that chronic occupational exposure increases plasma lipid levels and is thereby associated with cardiovascular complications.     

Development of chitosan-alginate based biosorbent for the removal of p-chlorophenol from aqueous medium

Removal of p-chlorophenol (pCP) from synthetic aqueous solutions was studied through adsorption on a biosorbent developed from chitosan (CS) and sodium alginate (SA), the natural cationic and anionic polysaccharides, respectively. Chitosan-coated sodium alginate beads were prepared and treated with calcium chloride solution in order to improve the stability as well as hydrophobic character. The resulting beads (CS/CA) were characterized using FTIR spectra, scanning electron microscopy (SEM), and BET surface analysis. The efficiency of this biosorbent in removing pCP from aqueous medium was studied under batch equilibrium and dynamic column flow experimental conditions. The binding capacity of the biosorbent was studied as a function of initial pH, contact time, initial concentration of adsorbate and amount of biomass. The data were fitted to pseudo-first-order, pseudo-second-order, and Weber–Morris models and found that the adsorption process followed pseudo-first-order kinetics. Further, the equilibrium data were fitted to Freundlich, Langmiur, and Dubinin–Radushkevich (D–R) adsorption isotherms and the isotherm constants were evaluated for adsorption of pCP. The maximum monolayer adsorption capacity of CS/CA beads was found to be 127 mg g^?1. Column flow results were used to generate breakthrough curves. The experimental results suggested that the chitosan–calcium alginate blended biosorbent was effective for the removal of pCP from aqueous medium.     

High immobilization of soil cesium using ball milling with nano-metallic Ca/CaO/NaH2PO4: implications for the remediation of radioactive soils

This report shows that cesium can be immobilized in soils with an efficiency of 96.4% by ball milling with nano-metallic Ca/PO₄. In Japan, the major concern on ¹³⁷Cs deposition and soil contamination due to the emission from the Fukushima Daiichi nuclear power plant showed up after a massive quake on March 11, 2011. The accident rated 7, the highest possible on the international nuclear event scale, released 160 petabecquerels (PBq) of iodine ¹³¹I and 15 PBq of ¹³⁷Cs according to the Japanese Nuclear and Industrial Safety Agency. Both ¹³⁷Cs and ¹³¹I radioactive nuclides are increasing cancer risk. Nonetheless, ¹³⁷Cs, with a half-life of about 30 years compared with 8 days for ¹³¹I, is a major threat for agriculture and stock farming and, in turn, human life for decades. Therefore, in Japan, the ¹³⁷Cs fixation and immobilization in contaminated soil is the most important problem, which should be solved by suitable technologies. Ball milling treatment is a promising treatment for the remediation of cesium-contaminated soil in dry conditions. Here, we studied the effect, factors and mechanisms of soil Cs immobilization by ball milling with the addition of nano-metallic Ca/CaO/NaH₂PO₄, termed “nano-metallic Ca/PO₄.” We used scanning electron microscopy combined with electron dispersive spectroscopy (SEM/EDS) and X-ray diffraction. Results show that immobilization efficiency increases from 56.4% in the absence of treatment to 89.9, 91.5, and 97.7 when the soil is ball-milled for 30, 60 and 120 min, respectively. The addition of nano-metallic Ca/PO₄ increased the immobilization efficiency to about 96.4% and decreased the ball milling time. SEM/EDS analysis allows us to observe that the amount of Cs decreased on soil particle surface. Use of nano-metallic Ca/PO₄ over a short milling time also decreases Cs leaching. Therefore, ball milling with nano-metallic Ca/PO₄ treatment may be potentially applicable for the remediation of radioactive Cs-contaminated soil in dry conditions.     

Zinc oxide nanoparticles as efficient catalyst for the synthesis of novel di-spiroindolizidine bisoxindoles in aqueous medium

Environmental Chemistry Letters - Developing environmentally benign synthetic protocols such as reaction in water is a major challenge. However, many of the known methods carried out in an...     

Geotechnical properties of fresh municipal solid waste at Orchard Hills Landfill, USA

This paper presents the results of a laboratory investigation to determine the geotechnical properties of fresh municipal solid waste (MSW) collected from the working phase of Orchard Hills Landfill located in Davis Junction (Illinois, USA). Laboratory testing was conducted on shredded MSW to determine the compaction, hydraulic conductivity, compressibility, and shear strength properties at in-situ gravimetric moisture content of 44%. In addition, the effect of increased moisture content during leachate recirculation on compressibility and shear strength of MSW was also investigated by testing samples with variable gravimetric moisture contents ranging from 44% to 100%. Based on Standard Proctor tests, a maximum dry density of 420 kg/m(3) was observed at 70% optimum moisture content. The hydraulic conductivity varied in a wide range of 10(-8)-10(-4)m/s and decreased with increase in dry density. Compression ratio values varied in a close range of 0.24-0.33 with no specific trend with the increase in moisture content. Based on direct shear tests, drained cohesion varied from 31 to 64 kPa and the drained friction angle ranged from 26 to 30 degrees. Neither cohesion nor friction angle demonstrated any correlation with the moisture content, within the range of moisture contents tested. The consolidated undrained triaxial shear tests on saturated MSW showed the total strength parameters (c and phi) to be 32 kPa and 12 degrees, and the effective strength parameters (c' and phi') to be 38 kPa and 16 degrees. The angle of friction (phi) decreased and cohesion (c) value increased with the increase in strain. The effective cohesion (c') increased with increase in strain; however, the effective angle of friction (phi') decreased first and then increased with the increase in strain. Such strain-dependent shear strength properties should be properly accounted in the stability analysis of bioreactor landfills.     

The origin and fate of arsenic in coalbed natural gas-produced water ponds

Coalbed natural gas (CBNG)-produced water contains small amounts of trace metals that can accumulate over time in produced water retention ponds. Within the Powder River Basin (PRB) of Wyoming, high concentrations of trace metals in pond water and their effect on shallow groundwater are potential concerns. A pond with a maximum As concentration of 146 microg L(-1) was studied in detail to determine the potential for groundwater pollution and to explain the cause for the high concentration of As. Infiltration characteristics, subsurface hydrology, our fall and pond water quality, isotope signatures, and trace metal balances were examined to assess the hydrology and geochemistry of the pond. The results indicated minimum or no infiltration of pond water and no measurable contamination of the shallow groundwater. The high As concentrations in the pond were determined to be the result of semi-continuous inputs of CBNG-produced water with low As concentrations (0.20-0.48 microg L(-1)), exasperated by low pond volumes during drought conditions. Because of reduced infiltration and high evaporation rates, As became concentrated over time. Reduced infiltration was most likely caused by the high sodium concentration and high sodium adsorption ratio of the CBNG-produced water, which disrupt soil structure. The findings for the pond and the techniques used may serve as a template for future impact assessments of other CBNG-produced water ponds and are relevant for the approximately 4000 ponds currently permitted in the PRB and for future ponds. Further studies are recommended in the use of playa landforms to store marginal-quality produced water.     

Surface ozonation of polyvinyl chloride for its separation from waste plastic mixture by froth floatation

Selective surface modification of polyvinyl chloride (PVC) by ozonation was evaluated to facilitate the separation of PVC from other heavy plastics with almost the same density as PVC, especially polyethylene terephthalate (PET), by the froth flotation process. The optimum froth flotation conditions were investigated, and it was found that at 40°C, 90% of PVC and PET plastics floated. The bubble size became larger and the area covered with bubbles on the plastic surface was reduced with increasing temperature. Optimum PVC separation was achieved with the flotation solution at 40°C and mixing at 180–200 rpm, even for sheet samples 10 mm in size. Combined treatment by ozonation and froth flotation is a simple, effective, and inexpensive method for PVC separation from waste plastics.