Preparation and Properties of Biodegradable Foams

Foam extrusion of biodegradable polyester [poly(butylene adipate-co-terephthalate) (PBAT)] and its blends with maleated thermoplastic starch (MTPS) using a chemical blowing agent was performed. The effect of MTPS and percentage of chemical blowing agent on various foam properties is discussed. In general, an increased amount of PBAT in the foams improves the properties of the foams. The foam samples were characterized by measurements of density, expansion ratio, specific length, compressive strength, resiliency, moisture sorption, and imaging using digital light microscopy. Density, expansion ratio, and specific length measurements show that the best characteristics of lowest density, highest expansion ratio, and highest specific length are exhibited by the PBAT samples. The compressive strength and foam density exhibit a power-law relationship. Greater amounts of PBAT in the samples increase the resiliency and decrease the steady state weight gain during moisture sorption. All samples show regions of unfoamed material when only 3% chemical blowing agent is used, but when 5 and 7% chemical blowing agent is used, the samples exhibit cells throughout the matrix.     

Adaptation potential of ecosystem-based management to climate change in the eastern Canadian boreal forest

Ecosystem-based management (EBM) of forests is gaining acceptance for its focus on the maintenance of the long-term integrity of ecosystem processes, but climate change challenges this view because of its impacts on these very processes. We have therefore evaluated the robustness of EBM to projected climate change, considering the role of climate on forest growth and fire regime in a boreal forest of eastern Canada. A climate sensitive growth index model was calibrated for three commercial species and used to project the evolution of merchantable volume for two climate scenarios (B1 and A2) under conventional and EBM strategies. Current burn rate and burn rates under future climate scenarios were also considered. Under the most extreme projected climate scenario, the periodic timber supply could be reduced by up to 79% through direct (growth reduction) and indirect (fire) effects. However, ecological indicators show that EBM is a more robust forest management strategy than conventional one demonstrating its adaptation potential to climate change at least in the short term.     

Methane oxidation in an intensively cropped tropical rice field soil under long-term application of organic and mineral fertilizers

Methane (CH4) oxidation is the only known biological sink process for mitigating atmospheric and terrestrial emissions of CH4, a major greenhouse gas. Methane oxidation in an alluvial soil planted to rice (Oryza sativa L.) under long-term application of organic (compost with a C/N ratio of 21.71), and mineral fertilizers was measured in a field-cum-laboratory incubation study. Oxidation rates were quantified in terms of decrease in the concentration of CH4 in the headspace of incubation vessels and expressed as half-life (t(1)2) values. Methane oxidation rates significantly differed among the treatments and growth stages of the rice crop. Methane oxidation rates were high at the maximum tillering and maturity stages, whereas they were low at grain-filling stage. Methane oxidation was low (t(1)2) = 15.76 d) when provided with low concentration of CH4. On the contrary, high concentration of CH4 resulted in faster oxidation (t(1)2) = 6.67 d), suggesting the predominance of "low affinity oxidation" in rice fields. Methane oxidation was stimulated following the application of mineral fertilizers or compost implicating nutrient limitation as one of the factors affecting the process. Combined application of compost and mineral fertilizer, however, inhibited CH4 oxidation probably due to N immobilization by the added compost. The positive effect of mineral fertilizer on CH4 oxidation rate was evident only at high CH4 concentration (t(1)2 = 4.80 d), while at low CH4 concentration their was considerable suppression (t(1) = 17.60 d). Further research may reveal that long-term application of fertilizers, organic or inorganic, may not inhibit CH4 oxidation.     

BOD-DO modeling and water quality analysis of a waste water outfall off Kochi, west coast of India

Water quality scenarios around an offshore outfall off Kochi were simulated using MIKE21 water quality model, assuming a high Biochemical Oxygen Demand (BOD=50 mg l(-1)) effluent discharge. The discharge is introduced into the model through an outfall located at a distance of 6.8 km from the shore at a depth of 10 m. Three scenarios were simulated with different discharge rates such as 2, 5 and 10 m3 s(-1), with BOD load of 8640, 21,600 and 43,200 kg day(-1) respectively. Model simulations were carried out to estimate the assimilation capacity of the waters off Kochi for the three discharge rates. The results show that for 10 m3 s(-1) effluent discharge, the initial BOD of 50 mg l(-1) reduced to 3.33 mg l(-1) at the outfall after 48 h. High BOD values were confined to an elliptical area of approximately 8 km2 around the outfall. Based on this, the assimilative capacity of the waters off Kochi in terms of BOD can be estimated as 38,000 kg day(-1). It is suggested that offshore waters could be used as a feasible alternative to the Kochi backwaters for the disposal of treated effluent.     

Butyltins in the sediments of Kochi and Mumbai harbours, west coast of India

Surface sediment samples were collected from various locations in the Mumbai and Kochi harbours, west coast of India, to assess the presence of butyltin compounds. Tributyltin (TBT) and dibutyltin (DBT) varied from 16 to 16,816 ng/g dry wt. and from undetected to 469 ng/g dry wt., respectively, of the sediment in Kochi harbour. In Mumbai harbour, the values of TBT and DBT ranged between 4.5 and 1193 ng/g dry wt. and from undetected to 131 ng/g dry wt. of the sediments, respectively. The concentrations of both TBT and DBT showed strong seasonal variation probably due to the effect of tides and currents. Nevertheless, the levels of butyltin compounds were generally higher at sites influenced by shipping activities such as navigation, dry dock and ship-building activities. The presence of DBT indicates the abiotic or microbiological degradation of TBT. Compared to TBT, DBT was relatively less abundant, suggesting either fresh inputs of TBT and/or less degradation of TBT. The concentrations of TBT showed significant positive relationships with organic carbon and lipid, implying that both lipophilic and ionic interactions were probably involved in controlling the abundance of TBT at these sediments. The observed levels of butyltin compounds are much higher than those required to induce toxic effects on marine organisms, suggesting that these sediments were contaminated with butyltin compounds.     

Impact of urbanization on Bellandur Lake, Bangalore--a case study

Lake and river water is the prime source for drinking, irrigation and other domestic purposes. Bellandur Lake is one of the major Lakes of Bangalore city. The addition of effluents from urbanized Bangalore city has changed the characteristics of the Lake from being a natural ecologically healthy Lake to an artificial reservoir of domestic sewage and industrial effluents. The DO of the Bellandur Lake water ranged from 3.8-6.3 mg/l. The Bellandur lake water BOD ranged from 89-99 mg/l due to absorption of pollutants by aquatic flora in lake system. If the present state of affairs continues for long, the Bellandur Lake may soon become an ecologically inactive Lake.     

Applications of smart grid technology in Nepal: status,challenges, and opportunities

Environmental Science and Pollution Research - Energy transformation and sustainability have become a challenge, especially for developing countries, which face broad energy-related issues such as...     

Distribution of PCBs, HCHs and DDTs, and their ecotoxicological implications in Bay of Bengal, India

Analyses of environmentally persistent pollutants like polychlorinated biphenyls (PCBs), hexachlorocyclohexane (HCH) isomers, and dichlorodiphenyltrichloroethane (DDT) and its metabolites in seawater and sediment samples collected from six locations along the east coast of India were carried out using High-Resolution Gas Chromatograph with High-Resolution Mass Spectrometer (HRGC-HRMS). Sediment and water from Chennai harbour and Cuddalore fishing harbour contained higher concentration of all the compounds. The highest concentration (6570 pg/g dry weight) of total PCB was found in sediment from Chennai harbour followed by sediments sampled in Chennai (opposite to Cooum River mouth) (505 pg/g), Cuddalore fishing harbour (335 pg/g) and Mandapam (251 pg/g). Concentrations in other locations were two orders of magnitude lower than Chennai harbour. A distinct PCB distribution pattern in sediment was observed between harbours and other locations. Greater concentrations of tetra-, penta- and hexachlorobiphenyls were observed in sediments of harbours and opposite to Cooum river mouth, but in other locations lower chlorinated biphenyls (di, tri and tetra-) were more. In seawater, HCH concentration was greater than DDT, but it was quite opposite in sediments. Elevated levels of DDT in sediment were observed only at highly populated urban locations, reflecting the local usage and input of this pesticide. Based on sediment/water quality criteria/guidelines, some coastal locations of the Bay of Bengal could be designated as being polluted by DDTs and gamma-HCH (lindane), but not by PCBs. This investigation reveals the declining trend on the environmental burden of persistent pesticides in Indian marine environment. Data on the organochlorine concentrations found in this survey can be used as reference levels for future POPs monitoring programme.