Three-dimensional laser machining of structural ceramics

Three- dimensional laser machining of structural ceramics such as alumina (Al₂O₃), silicon nitride (Si₃N₄), silicon carbide (SiC) and magnesia (MgO) was carried out using a 1.06 μm wavelength pulsed Nd:YAG laser. The rate of machining predicted in terms of material removed per unit time (mg/s) increased with an increase in heating rate (K/s). A thermal model based on temperature dependent absorptivity and thermophysical properties, in addition to conduction, convection and radiation based heat transfer, was developed to predict material removal rate. Predicted values were compared with actual measurements made from machined cavities. Such a study would enable advance predictions of the laser processing conditions required to machine cavities of desired dimensions.     

Accumulation and translocation of heavy metals in soil and plants from fly ash contaminated area

The present investigation deals with the accumulation of heavy metals in fields contaminated with fly ash from a thermal power plant and subsequent uptake in different parts of naturally grown plants. Results revealed that in the contaminated site, the mean level of all the metals (Cd, Zn, Cr, Pb, Cu, Ni, Mn and Fe) in soil and different parts (root and shoots) of plant species were found to be significantly (p<0.01) higher than the uncontaminated site. The enrichment factor (EF) of these metals in contaminated soil was found to be in the sequence of Cd (2.33) > Fe (1.88) > Ni (1.58) > Pb (1.42) > Zn (1.31) > Mn (1.27) > Cr (1.11) > Cu (1.10). Whereas, enrichment factor of metals in root and shoot parts, were found to be in the order of Cd (7.56) > Fe (4.75) > Zn (2.79) > Ni (2.22) > Cu (1.69) > Mn (1.53) > Pb (1.31) > Cr (1.02) and Cd (6.06) approximately equal Fe (6.06) > Zn (2.65) > Ni (2.57) > Mn (2.19) > Cu (1.58) > Pb (1.37) > Cr (1.01) respectively. In contaminated site, translocation factor (TF) of metals from root to shoot was found to be in the order of Mn (1.38) > Fe (1.27) > Pb (1.03) > Ni (0.94) > Zn (0.85) > Cd (0.82) > Cr (0.73) and that of the metals Cd with Cr, Cu, Mn, Fe; Cr with Pb, Mn, Fe and Pb with Fe were found to be significantly correlated. The present findings provide us a clue for the selection of plant species, which show natural resistance against toxic metals and are efficient metal accumulators.     

Learning,retention and coding of nest-associated visual cues by the Australian desert ant, <Emphasis Type="Italic">Melophorus bagoti</Emphasis>

A variety of social insects use visual cues for homing. In this study, we examine the possible factors affecting the learning and retention of nest-associated visual cues by the Australian desert ant Melophorus bagoti and the manner in which such cues are encoded by foraging ants. We placed four prominent cylindrical landmarks around a nest and trained foragers from that nest to a food source. Ants were tested with the landmark array in a distant testing field after (1) a known number of exposures to the landmarks (1, 3, 7 or 15 trials, spread over a period of 1 day, 2 days or ≥3 days) and (2) after a known period of delay (0, 24, 48, 96 or 192 h). The results show that a combination of an increase in training trials and an increase in number of training days affected the acquisition of landmark memory. Moreover, once the landmarks were learnt, they became a part of long-term memory and lasted throughout the ants’ foraging lifetime. To examine visual cue encoding behaviour, ants trained under similar conditions for 4 days were tested with (1) an identical landmark array, (2) landmarks of the same size used in training, but placed at twice the distance from each other, and (3) landmarks whose dimensions were doubled and placed at twice the distance from each other. In conditions (1) and (3), the ants searched extensively at the centre of the four landmarks, suggesting that, similar to the Saharan ant (genus Cataglyphis) and the honeybee, M. bagoti too uses a snapshot to match the view of the landmarks around the nest. But contrary to the snapshot model, in condition (2), the ants did not search extensively at the centre of the landmarks, but searched primarily 0.5 m from the landmark, the distance from each landmark to the nest during training. We discuss how various search models fare in accounting for these findings.     

Organochlorine insecticide residues in Ganga river water near Farrukhabad,India

Multiple residues of organochlorine insecticides were monitored in Ganga river water in the district of Farrukhabad in northern Indian for one year (1991–1992). Almost all the samples were found to be contaminated with residues of HCH and DDT. Residues of aldrin, endosulfan and heptachlor were also detected in a larger number of samples. Alpha-HCH, pp-DDT and alpha-endosulfan were found to dominate over the other isomers of HCH, DDT and endosulfan, respectively. Enhanced percentage of beta-HCH suggests accumulation of this isomer in the aquatic environment. The average concentration of aldrin was more than that of dieldrin. Aldrin residues often exceeded the WHO guideline value for drinking water and the concentration of heptachlor occasionally exceeded the specified limits.     

Soy proteins as environmentally friendly sizing agents to replace poly(vinyl alcohol)

An environmentally friendly and inexpensive substitute to the widely used poly(vinyl alcohol) (PVA) has been developed from soy proteins for textile warp sizing. Textile processing is the major source of industrial water pollution across the world, and sizing and desizing operations account for nearly 30 % of the water consumed in a textile plant. PVA is one of the most common sizing agents used for synthetic fibers and their blends due to PVA’s easy water solubility and ability to provide desired sizing performance. However, PVA does not degrade and is a major contributor to pollution in textile effluent treatment plants. Although considerable efforts have been made to replace PVA with biodegradable sizing materials, the performance properties provided by PVA on synthetic fibers and their blends have been unmatched so far. Soy proteins are inexpensive, biodegradable, and have been widely studied for potential use in food packaging, as resins and adhesives. In this research, the potential of using soy proteins as textile sizing agents to replace PVA was studied. Polyester and polyester/cotton rovings, yarns, and fabrics sized with soy protein showed a considerably better improvement in strength and abrasion resistance compared to commercially available PVA-based size. Soy protein size had a 5-day biochemical oxygen demand /chemical oxygen demand ratio of 0.57 compared to 0.01 for PVA indicating that soy protein sizes were easily biodegradable in activated sludge. The total and ammonia nitrogen released from the proteins also did not adversely impact the biodegradability. Good sizing performance and easy biodegradability demonstrate that soy protein-based sizes have potential to replace PVA-based sizes leading to substantial benefits to the textile industry and the environment.     

Temporal variation in density and diversity of cyanobacteria and cyanotoxins in lakes at Nagpur (Maharashtra State), India

Toxic cyanobacteria (TCB) are known worldwide for the adverse impacts on humans and animals. Species composition and the seasonal variation of TCB in water bodies depend on interactions between physical and chemical factors. The present investigation delineates temporal variations in physico-chemical water quality parameters, viz. nutrients and density, diversity, and distribution of toxic cyanobacteria and cyanotoxins in Lake Ambazari (21°7′52″N, 79°2′22″E) and Lake Phutala (21°9′18″N, 79°2′37″E) at Nagpur (Maharashtra State), India. These lakes are important sources of recreational activities and fisheries. Toxic cyanobacterial diversity comprised Anabaena, Oscillatoria, Lyngbya, Phormidium, and Microcystis, a well-known toxic cyanobacterial genus, as dominant. Chlorophyll-a concentrations in the lakes ranged from 1.44 to 71.74 mg/m³. A positive correlation of Microcystis biomass existed with orthophosphate-P (p?<?0.05) and nitrate-N (p?>?0.05). Identification and quantification of microcystin variants were carried out by high performance liquid chromatography equipped with photodiode array detector. Among all the tested toxin variants, microcystin-RR (arginine–arginine) was consistently recorded and exhibited a positive correlation (p?<?0.05) with Microcystis in both the water bodies. Microcystis bloom formation was remarkable between post-monsoon and summer. Besides nutrient concentrations governing bloom formation, the allelopathic role of microcystins needs to be established.     

Frequency distribution of pollutant concentrations over Indian megacities impacted by the COVID-19 lockdown

Environmental Science and Pollution Research - The megacities experience poor air quality frequently due to stronger anthropogenic emissions. India had one of the longest lockdowns in 2020 to curb...     

Heavy metals in the polychaete Glycera longipinnis from the southwest of India

Metal concentrations in sediment and in whole tissue of the benthic polychaete Glycera longipinnis collected along the southwest coast of India were analysed. Relative seasonal accumulation of metals (Cu, Pb, Cr, Ni, Zn, Cd, Hg) was studied by categorising the habitat as less polluted or highly polluted based on metal contamination routed through industrial and urban sources. The metal content in tissues varied seasonally in the ranges, Cu: 2.21–27.08 μg·g^?1, Pb: 0.06–4.92 μg·g^?1, Cr: 1.73–29.20 μg·g^?1, Ni: 1.60–4.61 μg·g^?1, Zn: 14.72–82.30 μg·g^?1, Cd: 0.04–1.38 μg·g^?1and Hg: below decetable limits to 0.86 μg·g^?1. Concentration of heavy metals was found to be high in the whole body of G. longipinnis pooled from the polluted transects. The results of this study suggest that G. longipinnis may act as a useful biological indicator for heavy metal pollution along the southwest coast of India.     

Alkali Treated 3D Chitosan Scaffolds with Enhanced Strength and Stability

Journal of Polymers and the Environment - 3D chitosan scaffolds treated with alkali showed enhanced mechanical properties and stability in aqueous conditions. Chitosan is a preferred polymer for...