Microbial structure and chemical components of aerosols caused by rotating brushes in a wastewater treatment plant

Purpose

Bacterial community structure and the chemical components in aerosols caused by rotating brushes in an Orbal oxidation ditch were assessed in a Beijing municipal wastewater treatment plant.

Methods

Air samples were collected at different distances from the aerosol-generating rotating brushes. Molecular culture-independent methods were used to characterize the community structure of the airborne bacteria in each sample regardless of cell culturability. A clone library of 16S rDNA directly amplified from air DNA of each sample was constructed and sequenced to analyze the community composition and diversity. Insoluble particles and water-soluble ions emitted with microorganisms in aerosols were analysis by a scanning electron microscope together with energy dispersive X-ray spectroscopy and ion chromatogram analyzer.

Results

In total, most of the identified bacteria were Proteobacteria. The majority of sequences near the rotating brushes (the main source of the bioaerosols) were Proteobacteria (62.97 %) with ??-(18.52 %) and ??-(44.45?%) subgroups and Bacteroidetes (29.63 %). Complex patterns were observed for each sampling location, suggesting a highly diverse community structure, comparable to that found in water in the Orbal oxidation ditch. Accompany with microorganisms, 46.36???g/m³ of SO ₄ ^2? , 29.35???g/m³ of Cl^?, 21.51???g/m³ of NO ₃ ^? , 19.76???g/m³ of NH ₄ ⁺ , 11.42???g/m³ of PO ₄ ^3? , 6.18???g/m³ of NO ₂ ^? , and elements of Mg, Cl, K, Na, Fe, S, and P were detected from the air near the aerosols source.

Conclusions

Differences in the structure of the bacterial communities and chemical components in the aerosols observed between sampling sites indicated important site-related variability. The composition of microorganisms in water was one of the most important sources of bacterial communities in bioaerosols. Chemical components in bioaerosols may provide a media for airborne microorganism attachment, as well as a suitable microenvironment for their growth and survival in the air. This study will be benefit for the formulation of pollution standards, especially for aerosols, that take into account plant workers?? health.     

Characteristics of penicillin bacterial residue

IMPLICATIONS: During the production of penicillin, a mass of waste bacterial residue is generated. In the past, the bacterial residues have been used for food additives. Unfortunately, doubts of their suitability as a feedstock have been raised because of the small amount of antibiotics and the degradation products remaining in the bacterial residues. So, penicillin bacterial residue is one of the hazardous wastes. Therefore, penicillin bacterial residue should be managed in accordance with the hazardous waste. To get a right method, the penicillin bacterial residue was characterized.     

大型水生植物对骆马湖氮、磷元素的影响

对骆马湖有草区和无草区水体和沉积物中氮、磷元素含量分析,结果表明:无草区水体中总氮、总磷含量高于有草区;有草区表层沉积物总氮含量随时间变化明显,而无草区表层沉积物总氮含量随时间的变化很小;有草区与无草区表层沉积物中总磷含量的时间变化并无明显差异;有草区表层沉积物总氮含量基本上均高于无草区,而有草区表层沉积物总磷含量均要低于无草区。骆马湖有草区与无草区采样点沉积物碱性磷酸酶活性大小在58.41～315.07 mg/(kg.h)范围内变化,有草区的碱性磷酸酶的活性普遍低于无草区的碱性磷酸酶活性。在湖泊中种植大型水生植物确实可以减少水体污染,达到净化水质的目的。     

木粉/壳聚糖接枝丙烯酸-丙烯酰胺吸附树脂对二元重金属离子溶液中Pb^2＋的吸附

采用自制木粉/壳聚糖接枝丙烯酸-丙烯酰胺吸附树脂R1、R2、R3对二元金属离子Cu2＋/Pb2＋和Zn2＋/Pb2＋溶液中的吸附性能进行了较系统考察。Pb2＋离子溶液中存在竞争离子Cu2＋、Zn2＋时,随竞争离子浓度增加,3种吸附树脂R1、R2、R3对Pb2＋的吸附量明显下降,而竞争离子吸附量显著增加。二元溶液中各金属离子浓度相同时,3种树脂对竞争离子Cu2＋、Zn2＋的吸附量大于对Pb2＋的吸附量;各溶液中分别加入NaCl及NaNO3、尿素后,对Pb2＋离子的吸附量下降迅速。随吸附树脂用量增加,竞争离子Cu2＋、Zn2＋的吸附量逐渐减小,Pb2＋的吸附量在吸附树脂用量0.10 g/L（Zn2＋/Pb2＋溶液）或0.15 g/L（Cu2＋/Pb2＋溶液）时出现最大值。溶液pH值对树脂吸附性能有显著影响。3.0     

微波诱导鳞片石墨-H2O2催化氧化处理甲基紫废水

研究微波诱导鳞片石墨-H2O2催化氧化处理甲基紫废水工艺,探讨各种因素的协同作用及对废水脱色效果的影响,并采用SEM、EDX、XRD和FTIR对新鲜及使用6次后的鳞片石墨进行表征。结果表明,微波诱导鳞片石墨-H2O2能高效快速降解废水中的甲基紫;在50mL初始pH为3,质量浓度为10mg／L的甲基紫废水中,H2O2用量1mL／L,鳞片石墨3g／L,微波输出功率259W,微波辐射时间9min的最佳处理工艺条件下,甲基紫脱色率达到了98．80％;微波、鳞片石墨、H2O2体系对甲基紫废水降解效果明显,产生协同效应。紫外-可见光谱分析表明,废水中甲基紫结构被破坏,但仍含有少量苯环等小分子。动力学研究表明,脱色反应符合一级反应动力学规律,反应速率常数^为0．42613min^-1,反应半衰期t。为1．626min。     

Characteristics of penicillin bacterial residue

A hybrid selective noncatalytic reduction/selective catalytic reduction (SNCR/SCR) system that uses two types of technology, low-temperature SCR process and SNCR process, was designed to develop nitrogen oxide (NO_x) reduction technology. SCR was conducted with space velocity (SV) = 2400 hr^?1 and hybrid SNCR/SCR with SV = 6000 hr^?1, since the study focused on reducing the amount of catalyst and both achieved 98% NO_x reduction efficiency. Characteristics of NO_x reduction by NH₃ were studied for low-temperature SCR system at 150 °C using Mn-V₂O₅/TiO₂ catalyst. Mn-added V₂O₅/TiO₂ catalyst was produced, and selective catalyst reduction of NO_x by NH₃ was experimented. NO_x reduction rate according to added Mn content in Mn-V₂O₅/TiO₂ catalyst was studied with varying conditions of reaction temperature, normalized stoichiometric ratio (NSR), SV, and O₂ concentration. In the catalyst experiment according to V₂O₅ concentration, 1 wt.% V₂O₅ catalyst showed the highest NO_x reduction rate: 98% reduction at temperature window of 200~250 °C. As a promoter of the V₂O₅ catalyst, 5 wt.% Mn was added, and the catalyst showed 47~90% higher efficiency even with low temperatures, 100~200 °C. Mn-V₂O₅/TiO₂ catalyst, prepared by adding 5 wt.% Mn in V₂O₅/TiO₂ catalyst, showed increments of catalyst activation at 150 °C as well as NO_x reduction. Mn-V₂O₅/TiO₂ catalyst showed 8% higher rate for NO_x reduction compared with V₂O₅/TiO₂ catalyst in 150 °C SCR. Thus, (5 wt.%)Mn-(1 wt.%)V₂O₅/TiO₂ catalyst was applied in SCR of hybrid SNCR/SCR system of low temperature at 150 °C. Low-temperature SCR hybrid SNCR/SCR (150 °C) system and hybrid SNCR/SCR (350 °C) showed 91~95% total reduction rate with conditions of SV = 2400~6000 hr^?1 SCR and 850~1050 °C SNCR, NSR = 1.5~2.0, and 5% O₂. Hybrid SNCR/SCR (150 °C) system proved to be more effective than the hybrid SNCR/SCR (350 °C) system at low temperature.

Implications:?NO_x control is very important, since they are the part of greenhouse gases as well as the cause of acid rain and ozone hole. A technology, so-called hybrid SNCR/SCR process, was tested using Mn-V₂O₅/TiO₂ monolithic catalyst for NO_x reduction, and the method is promising. The results of this study would provide some ideas to parties such as policy makers, environmental engineers, and so on.     

Gas-phase elemental mercury removal in a simulated combustion flue gas using TiO2 with fluorescent light

A previously proposed technology incorporating TiO₂ into common household fluorescent lighting was further tested for its Hg⁰ removal capability in a simulated flue-gas system. The flue gas is simulated by the addition of O₂, SO₂, HCl, NO, H₂O, and Hg⁰, which are frequently found in combustion facilities such as waste incinerators and coal-fired power plants. In the O₂ + N₂ + Hg⁰ environment, a Hg⁰ removal efficiency (η_Hg) greater than 95% was achieved. Despite the tendency for η_Hg to decrease with increasing SO₂ and HCl, no significant drop was observed at the tested level (SO₂: 5–300 ppm_v, HCl: 30–120 ppm_v). In terms of NO and moisture, a significant negative effect on η_Hg was observed for both factors. NO eliminated the OH radical on the TiO₂ surface, whereas water vapor caused either the occupation of active sites available to Hg⁰ or the reduction of Hg₀ by free electron. However, the negative effect of NO was minimized (η_Hg > 90%) by increasing the residence time in the photochemical reactor. The moisture effect can be avoided by installing a water trap before the flue gas enters the Hg⁰ removal system.

Implications: This paper reports a novel technology for a removal of gas-phase elemental mercury (Hg⁰) from a simulated flue gas using TiO₂-coated glass beads under a low-cost, easily maintainable household fluorescent light instead of ultraviolet (UV) light. In this study, the effects of individual chemical species (O₂, SO₂, HCl, NO, and water vapor) on the performance of the proposed technology for Hg⁰ removal are investigated. The result suggests that the proposed technology can be highly effective, even in real combustion environments such as waste incinerators and coal-fired power plants.     

Artificial and enhanced humification of soil organic matter using microwave irradiation

Microwave (MW) irradiation, a less energy-intensive irradiation technique, was employed to promote the changes in physicochemical properties of soil organic matter (SOM). MW was irradiated to forest soils for 10 min. Then, the physical and chemical properties of the SOM were analyzed with UV absorbance spectroscopy, Fourier transform infrared spectroscopy, elemental analysis, and size exclusion chromatography. Also, the SOM was fractionated into biopolymer, fulvic acid, and humic acid, and each fraction was analyzed quantitatively. These analyses revealed that the SOM became more aromatic and nonpolar, highly condensed, and macromolecular organic substances that possess a higher amount of functional groups found in highly humified substances than the original SOM as a result of the MW irradiation. The humification-like alteration of SOM property was attributable to the thermal cracking and to the radical reaction, particularly when the MW was irradiated along with activated carbon under the aerobic condition. The results of this study suggest that the artificial and enhanced property changes of SOM can be accomplished by MW irradiation on an engineering time scale, which can contribute to the successful soil and groundwater remediation practice.     

四环素高效降解酵母菌Trichosporon mycotoxinivoransXPY-10降解特性

Trichosporon mycotoxinivorans XPY-10是一株分离自抗生素制药厂的高效四环素降解酵母菌。为了建立该菌株降解四环素的适宜条件,分别研究了碳源、有机氮源、金属离子等营养物质及初始底物浓度、接种量、pH、温度、装液量、摇床转速等理化因素对菌体生长及四环素降解效率的影响。结果表明,菌株XPY-10生长的最适碳源和氮源分别为蔗糖和蛋白胨。在含有0.05% FeSO₄的培养基中,菌株XPY-10降解四环素的适宜条件为：接种量2%,pH 8,温度34℃,装液量100 mL（250 mL 三角瓶）,摇床转速180 r/min。在此条件下,菌株XPY-10在7 d内对初始浓度为600 mg/L的四环素降解率为83.63%。本菌株对养殖废水及制药废水中四环素的污染治理有一定的应用前景。     

猪粪堆肥中铜锌与腐殖质组分的结合竞争

为研究猪粪堆肥中铜锌与腐殖质组分的结合竞争,以猪粪和秸秆为堆腐原料,进行了为期36 d的好氧堆肥实验,研究猪粪堆肥过程中腐殖质组分(胡敏酸和富里酸)、胡敏酸结合态铜锌、富里酸结合态铜锌含量的变化。结果表明,堆肥结束后,腐殖化程度提高,胡敏酸碳含量增加394.4%,富里酸碳含量降低64.9%,腐殖化指数从0.24增加到3.33;随着堆肥的进行,胡敏酸结合态铜锌含量分别增加394.3%和56%,而富里酸结合态铜锌含量分别下降17.5%和28.4%;相关分析表明,胡敏酸结合态铜、富里酸结合态锌与胡敏酸、富里酸碳含量及腐殖化指数均成显著相关(P<0.01);堆肥过程中,胡敏酸结合态铜与富里酸结合态铜之比大于1,而胡敏酸结合态锌与富里酸结合态锌小于1,另外,胡敏酸中的Cu/Zn大于1,而富里酸中的Cu/Zn小于1,表明在腐殖质中铜主要与胡敏酸结合,而锌主要与富里酸结合。研究揭示了猪粪堆肥中重金属铜锌与不同腐殖质组分的结合竞争关系,为畜禽粪便堆肥土地利用的风险评估和风险控制提供科学依据。