Species differences in accumulation of nitrogen pools in phytoplankton

The changes in the intracellular concentrations of nitrate, ammonium, free amino acids, protein, DNA, RNA and total nitrogen were measured in batch cultures of seven species of marine phytoplankton as they progressed from being nitrogen sufficient to being nitrogen starved. After several days of nitrogen starvation, either nitrate or ammonium was added to the cultures, and the measurements were continued for 10 to 36 h. By this means it was possible to assess the long-term and short-term changes in cellular nitrogen compounds and how they relate to phytoplankton nitrogen uptake and growth. Considerable species differences were observed in the amounts and kinds of nitrogen compounds which were stored and the degree to which the utilization of these compounds could support growth if the external nitrogen supply is low or variable. Despite the species variation, the results suggest that the concentrations or ratios of a number of intracellular nitrogen compounds can be used to assess the nitrogen deficiency and/or growth rate of natural phytoplankton populations.Contribution No. 1373 from the School of Oceanography, University of Washington and Contribution No. 83006 from the Bigelow Laboratory for Ocean Sciences     

POTENTIAL FOR REDUCING NITROGEN POLLUTION THROUGH IMPROVED AGRONOMIC PRACTICES1

ABSTRACT: According to the 1990 National Water Quality Inventory nutrient runoff from agriculture is one of the largest contributors to watershed contamination. Nutrient balance studies suggest that many farmers use more fertilizer than necessary because of insufficient crediting for nutrients coming from manure and legumes. Using data from the USDA's 1990 Farm Costs and Returns Survey, we found that farmers raising only conventional crops spend between $470 to $624 million more per year on fertilizer than necessary. This accounts for a range of 24 percent to 32 percent of total annual nitrogen (N) purchases. The excess N amounts to between 2.5 to 3.3 billion pounds N and has considerable water pollution potential. Farmers and the fertilizer industry have responded positively to highly focused research and education programs which support improved crediting of these nutrients.     

Homeowner Attitudes and Practices Towards Residential Landscape Management in Ohio, USA

This study describes the results of a survey of 432 homeowners in Ohio, USA concerning their perceptions and practices regarding management of residential landscapes. The results reveal that outdoor residential environments are extremely important to homeowners, who tend to view their yards as serving multiple functions: a place to observe nature and to socialize as well as a place of beauty and recreation. Use of a lawn care company to apply chemicals is reported by 22 % of respondents, while 40 % either apply chemicals themselves or have someone other than a lawn care company do it. Logistic regressions reveal that factors influencing a homeowner's decision to employ a lawn care company or to apply chemicals themselves include: household income (+), perceived impacts on the environment (-), whether the next door neighbor does it (+), and type of residential environment (rural -, suburban and urban +). A theme that emerges throughout the study is the perceived importance of the role of the lawn in residents' sense of social status or acceptance in the neighborhood. This perception can be viewed as a positive in ensuring that residential environments are well maintained, but also as a negative resulting in environmental degradation or presenting a barrier to creativity in the development of alternative residential environments. Specific policy implications of these findings are that efforts aimed at educating homeowners about the environmental impacts of their lawn care choices are likely to have more success if they are directed at neighborhood groups rather than individuals, show that alternatives are easy to adopt, affordable, and can produce the characteristics of lawns that homeowners seek.     

Predicting the Performance of Particulate Control Equipment

A new probabilistic modeling environment is described which allows the explicit and quantitative representation of the uncertainties inherent in new environmental control processes for SO₂ and NO_x removal. Stochastic analyses provide additional insights into the uncertainties in process performance and cost not possible with conventional deterministic or sensitivity analysis. Applications of the probabilistic modeling framework are illustrated via an analysis of the performance and cost of the fluidized bed copper oxide process, an advanced technology for the control of SO₂ and NO_x emissions from coal-fired power plants. An engineering model of a conceptual commercial-scale system provides the basis for the analysis. The model also captures interactions between the power plant, the SO₂/NO_x removal process, and other components of the emission control system. Results of the analysis address payoffs from process design improvements; the dependence of system cost on process design conditions and the availability of byproduct markets; and the likelihood that the advanced process will yield cost savings relative to conventional technology. The implications of case study results for research planning and comparisons with alternative systems also are briefly discussed.     

Comparison of Analytical Techniques for Measuring Hydrocarbon Emissions from the Manufacture of Fiberglass-Reinforced Plastics

ABSTRACT

Research Triangle Institute and the U.S. Environmental Protection Agency conducted several projects to measure hydrocarbon emissions associated with the manufacture of fiberglass-reinforced plastics. The purpose of these projects was to evaluate pollution prevention techniques to reduce emissions by altering raw materials, application equipment, and operator technique. Analytical techniques were developed to reduce the cost of these emission measurements. Emissions from a small test mold in a temporary total enclosure (TTE) correlated with emissions from full-size production molds in a separate TTE. Gravimetric mass balance measurements inside the TTE generally agreed to within ± 30 % with total hydrocarbon (THC) measurements in the TTE exhaust duct. Pure styrene evaporation tests served as quality control checks for THC measurements and generally agreed to within ± 5 %.     

Comparison of the Particle Size Distribution of Heavy-Duty Diesel Exhaust Using a Dilution Tailpipe Sampler and an In-Plume Sampler during On-Road Operation

ABSTRACT

Originally constructed to develop gaseous emission factors for heavy-duty diesel trucks, the U.S. Environmental Protection Agency's (EPA) On-Road Diesel Emissions Characterization Facility has been modified to incorporate particle measurement instrumentation. An electrical low-pressure impactor designed to continuously measure and record size distribution data was used to monitor the particle size distribution of heavy-duty diesel truck exhaust. For this study, which involved a high-mileage (900,000 mi) truck running at full load, samples were collected by two different methods. One sample was obtained directly from the exhaust stack using an adaptation of the University of Minnesota's air-ejector-based mini-dilution sampler. The second sample was pulled from the plume just above the enclosed trailer, at a point ~11 m from the exhaust discharge. Typical dilution ratios of about 300:1 were obtained for both the dilution and plume sampling systems. Hundreds of particle size distributions were obtained at each sampling location. These were compared both selectively and cumulatively to evaluate the performance of the dilution system in simulating real-world exhaust plumes. The data show that, in its current residence-time configuration, the dilution system imposes a statistically significant bias toward smaller particles, with substantially more nanoparticles being collected than from the plume sample.     

Evaluation of pollution prevention options to reduce styrene emissions from fiber-reinforced plastic open molding processes

Pollution prevention (P2) options to reduce styrene emissions, such as new materials and application equipment, are commercially available to the operators of open molding processes. However, information is lacking on the emissions reduction that these options can achieve. To meet this need, the U.S. Environmental Protection Agency's (EPA) Air Pollution Prevention and Control Division, working in collaboration with Research Triangle Institute, measured styrene emissions for several of these P2 options. In addition, the emission factors calculated from these test results were compared with the existing EPA emission factors for gel coat sprayup and resin applications. Results show that styrene emissions can be reduced by up to 52% by using controlled spraying (i.e., reducing overspray), low-styrene and styrene-suppressed materials, and nonatomizing application equipment. Also, calculated emission factors were 1.6-2.5 times greater than the mid-range EPA emission factors for the corresponding gel coat and resin application. These results indicate that facilities using existing EPA emission factors to estimate emissions in open molding processes are likely to underestimate actual emissions. Facilities should investigate the applicability and feasibility of these P2 options to reduce their styrene emissions.