Pollutant effects on the mixed function oxygenase (MFO) and reproductive systems of the marine polychaeteNereis virens

The cytochrome P-450 dependent mixed-function oxygenase (MFO) system ofNereis virens, found in the endoplasmic reticulum of the intestinal epithelium, has similar components and cofactor requirements when compared to other invertebrates. Worms exposed to food containing benzo(a)pyrene or a mixture of polychlorinated biphenyls (Aroclor 1254) had significantly higher MFO activity and cytochrome P-450 content than unexposed ones.N. virens from a site in Porland, Maine, USA, which was heavily contaminated with oil, and nearby clean reference sites were studied. The weight, MFO activity and presence or absence of gametes were determined. The MFO activity in worms from the oil-contaminated site was approximately six times that of worms from the reference sites; worms from the reference areas were six times larger than oil-contaminated worms. Worms from the oil-contaminated area lacked or had undeveloped gametes in spring, summer and fall. In contrast, many of the worms collected from the reference sites at the same times had fully developed gametes.     

Benefits of protected areas for nonbreeding waterbirds adjusting their distributions under climate warming

Climate warming is driving changes in species distributions and community composition. Many species have a so-called climatic debt, that is, shifts in range lag behind shifts in temperature isoclines. Inside protected areas (PAs), community changes in response to climate warming can be facilitated by greater colonization rates by warm-dwelling species, but also mitigated by lowering extirpation rates of cold-dwelling species. An evaluation of the relative importance of colonization-extirpation processes is important to inform conservation strategies that aim for both climate debt reduction and species conservation. We assessed the colonization-extirpation dynamics involved in community changes in response to climate inside and outside PAs. To do so, we used 25 years of occurrence data of nonbreeding waterbirds in the western Palearctic (97 species, 7071 sites, 39 countries, 1993–2017). We used a community temperature index (CTI) framework based on species thermal affinities to investigate species turnover induced by temperature increase. We determined whether thermal community adjustment was associated with colonization by warm-dwelling species or extirpation of cold-dwelling species by modeling change in standard deviation of the CTI (CTI_SD). Using linear mixed-effects models, we investigated whether communities in PAs had lower climatic debt and different patterns of community change than communities outside PAs. For CTI and CTI_SD combined, communities inside PAs had more species, higher colonization, lower extirpation, and lower climatic debt (16%) than communities outside PAs. Thus, our results suggest that PAs facilitate 2 independent processes that shape community dynamics and maintain biodiversity. The community adjustment was, however, not sufficiently fast to keep pace with the large temperature increases in the central and northeastern western Palearctic. Our results underline the potential of combining CTI and CTI_SD metrics to improve understanding of the colonization-extirpation patterns driven by climate warming.     

Assessing a Transition to 100% Renewable Power Generation in a Non-interconnected Area: A Case Study for La Réunion Island

Environmental Modeling & Assessment - In this paper, we present a comprehensive, multi-timescale approach to evaluate energy transition policies aiming at fully renewable generation in power...     

The influence of the level of definition of functional specifications on the environmental performances of a complex system. EcoCSP approach

The tendency towards a homogenous mode of development modelled on that of Western countries means that sustainable development has become increasingly urgent. It is necessary to thoroughly redefine products and their expected performances in such a way that the consequences are compatible with sustainable development. In the domain of product design, this means that it is no longer sufficient to use assessment tools “after the fact” to check the impact of products whose functional unit (FU) was defined prior to production; it is now necessary to rethink the definition of the FU itself. This article aims to present an approach based on a combination of life cycle analysis methods and problem-solving by constraint satisfaction. This original approach makes it possible to vary the design of the different dimensions of the FUs of a complex system and thus to make it easier to identify the best architecture along with the best functional definition of the system. In this study, the EcoCSP approach is applied to define the functional performances of an ecological passenger ferry. The complexity of couplings between subsystems and the sheer number of those subsystems mean that the designer has to use “intelligent” tools. These simulate a great number of scenarios and help him/her to fine-tune the system and make the right technological choices with regard to the right functional specifications.     

Leaching behaviour of hazardous demolition waste

Demolition wastes are generally disposed of in unlined landfills for inert waste. However, demolition wastes are not just inert wastes. Indeed, a small fraction of demolition waste contains components that are hazardous to human health and the environment, e.g., lead-based paint, mercury-contained in fluorescent lamps, treated wood, and asbestos. The objective of this study is to evaluate the release potential of pollutants contained in these hazardous components when they are mixed with inert wastes in unlined landfills. After identification of the different building products which can contain hazardous elements and which can be potentially pollutant in landfill scenario, we performed leaching tests using three different lysimeters: one lysimeter containing only inert wastes and two lysimeters containing inert wastes mixed with hazardous demolition wastes. The leachates from these lysimeters were analysed (heavy metals, chlorides, sulphates fluoride, DOC (Dissolved Organic Carbon), phenol index, and PAH). Finally, we compared concentrations and cumulative releases of elements in leachates with the limits values of European regulation for the acceptance of inert wastes at landfill. Results indicate that limit values are exceeded for some elements. We also performed a percolation column test with only demolition hazardous wastes to evaluate the specific contribution of these wastes in the observed releases.     

Spectroscopic characterization of organic matter of a soil and vinasse mixture during aerobic or anaerobic incubation

Mineralization potentials are often used to classify organic wastes. These methods involve measuring CO₂ production during batch experiments, so variations in chemical compounds are not addressed. Moreover, the physicochemical conditions are not monitored during the reactions. The present study was designed to address these deficiencies. Incubations of a mixture of soil and waste (vinasse at 20% dry matter from a fermentation industry) were conducted in aerobic and anaerobic conditions, and liquid samples obtained by centrifugation were collected at 2 h, 1 d and 28 d. Dissolved organic carbon (DOC) patterns highlighted that: there was a “soil effect” which increased organic matter (OM) degradation in all conditions compared to vinasse incubated alone; and OM degradation was faster under aerobic conditions since 500 mg kg^?1 of C remained after aerobic incubation, as compared to 4000 mg kg^?1 at the end of the anaerobic incubation period. No changes were detected by Fourier transform infrared spectroscopy (FTIR) between 2 h and 1 d incubation. At 28 days incubation, the FTIR signal of the aerobic samples was deeply modified, thus confirming the high OM degradation. Under anaerobic conditions, the main polysaccharide contributions (ν(C–O)) disappeared at 1000 and 1200 cm^?1, as also confirmed by the ¹³C NMR findings. Under aerobic incubation, a 50% decrease in the polysaccharide proportion was observed. Under anaerobic conditions, significant chemical modifications of the organic fraction were detected, namely formation of low molecular weight organic acids.     

A multi-agent simulation to assess the risk of malaria re-emergence in southern France

A multi-agent simulation (MAS) was developed to assess the risk of malaria re-emergence in the Camargue in southern France, a non-endemic area where mosquitoes of the genus Anopheles (Culicidae) live. The contact rate between people and potential malaria vectors, or the human biting rate, is one of the key factor to predict the risk of re-emergence of malaria, would the parasite be introduced in the region. Our model (called MALCAM) represents the different agents that could influence malaria transmission in the Camargue – people, mosquitoes, animal hosts and the landscape – in a spatially explicit environment. The model simulates spatial and temporal variations in human biting rate at the landscape scale. These variations depend on the distribution of people and potential vectors, their behaviour and their interactions. A land use/cover map was used as a cellular-spatial support for the movements of and interactions between mobile agents. The model was tested for its sensitivity to variations in parameter values, and for the agreement between field observations and model predictions. The MALCAM model provides a tool to better understand the interactions between the multiple agents of the disease transmission system, and the land use and land cover factors that control the spatial heterogeneity in these interactions. It allows testing hypotheses and scenarios related to disease dynamics by varying the value of exogenous biological, geographical, or human factors. This application of agent-based modelling to a human vector-borne disease can be adapted to different diseases and regions.     

Effect of two TiO2 nanoparticles on the growth of unicellular green algae using the OECD 201 test guideline: influence of the exposure system

This work aimed at assessing the influence of different exposure systems to perform the commonly used OECD 201 freshwater algal growth inhibition test in the context of nanoparticles hazard assessment. Two distinct TiO₂ nanoparticles were considered and three different exposure systems were investigated: Erlenmeyers flasks and 24-well microplates (both using an orbital shake system), and an alternative system using cylindrical vials and magnetic stirring. All three systems are in accordance with the OECD 201 test guideline recommendations. We concluded that the exposure systems applied to achieve the test can substantially affect the ecotoxicological results and the subsequent calculated ECx. The selected systems influenced both the interaction between algal cells and TiO₂ nanoparticles as well as the growth inhibition recorded. Disparities in ecotoxicity relative to the TiO₂ nanoparticles tested were also observed and are finally discussed.     

Pesticide and agro-ecological transition: assessing the environmental and human impacts of pesticides and limiting their use

Environmental Science and Pollution Research -     

Permanent sample plots for natural tropical forests: A rationale with special emphasis on Central Africa

Permanent sample plots (PSP), where trees are individually and permanently marked, have received increased interest in Central Africa as a tool to monitor vegetation changes. Although techniques for mounting PSP in tropical forests are well known, their planning still deserves attention. This study aims at defining a rationale for determining the size and number of replicates for setting up PSP in mixed tropical forests. It considers PSP as a sampling plan to estimate a target quantity with its associated margin of error. The target quantity considered here is the stock recovery rate, which is a key parameter for forest management in Central Africa. It is computed separately for each commercial species. The number of trees to monitor for each species defines the margin of error on the stock recovery rate. The size and number of replicated plots is obtained as the solution of an optimization problem that consists in minimizing the margin of error for every species while ensuring that the mounting cost remains below a given threshold. This rationale was applied using the data from the M’Baïki experimental site in the Central African Republic. It showed that the stock recovery rate is a highly variable quantity, and that the typical cost that forest managers are prone to devote to PSP leads to high margins of error. It also showed that the size and number of replicated plots is related to the spatial pattern of trees: clustered or spatially heterogeneous patterns favor many small plots, whereas regular or spatially homogeneous patterns favor few large plots.