内蒙古流沙山金(钼)矿床地质特征及矿床类型的划分

流沙山矿床是近年来在内蒙古西部发现的一处金 (钼 )矿床。金 (钼 )矿化主要在海西期花岗闪长岩内呈大脉细脉和线脉产出 ,其空间展布形态受一系列环状断裂带控制。金 (钼 )矿体多为环状到半环状透镜体 ,局部地段为扁豆群和楔状体。矿石的金属矿物有辉钼矿、白钨矿、辉铋矿、黄铜矿、黄铁矿、钼钙矿、自然金和银金矿。脉石矿物有石英、钾长石、斜长石、黑云母和角闪石 ,其中辉钼矿Re Os同位素等时线年龄为 (2 6 0±10 )× 10 6a。矿体的围岩蚀变主要有硅化和钾化 (钾长石化和绢云母化 ) ,次为绢英岩化和青盘岩化。本文重点研究了与矿化有关的花岗岩类岩相学和岩石化学 ,阐述了金 (钼 )矿床的矿化特征 ,划分了矿床的蚀变分带。在对比流沙山金 (钼 )矿床与国内外经典性斑岩型金属矿床主要特征的基础上 ,将流沙山 (钼 )矿床确定为深成岩型斑岩金 (钼 )矿床     

黄浦江上游工业废水对程序外DNA合成的影响

用SD大鼠原代肝细胞作程序外DNA合成(UDS)试验,检测黄浦江上游水源保护区9家工厂的工业废水,结果表明,在不同时间采集的9家工厂的两批工业废水UDS试验均呈阳性,并且呈剂量—反应关系。这说明9家工厂的工业废水有潜在的致突变作用和致癌作用,对这些工业废水的排放应加以控制。     

磷渣电炉还原渣白水泥的研究

本文系统地分析了磷渣及电炉还原渣的特性,并将两者科学地调配,研制出一种凝结正常,早期强度高、后期强度不倒缩、压蒸安定性合格的无熟料磷渣电炉还原渣白水泥.     

2种浸出方法对水泥熟料的适用性比较

采用2种不同类型的代表性浸出方法:TCLP和NEN7371对不同重金属含量及不同烧制条件下所得水泥熟料进行浸出实验.结果表明,NEN7371方法下各样品中所有受试重金属几乎均有检出,大部分重金属的浸出率均高于10%;重金属的浸出浓度与其在熟料样品中含量的趋势对应性较好;TCLP方法下各样品中的受试重金属均只有部分检出,且浸出率一般在0.5%左右,浸出浓度很低,仪器检测误差较大.说明在考察水泥熟料中重金属的浸出特性时,NEN7371方法的适用性相对更好.     

Remedial strategies for municipal solid waste management in China

The purpose of this investigation is to evaluate the current status and to identify the problems of municipal solid waste (MSW) management in China to determine appropriate remedial strategies. This is the second of two papers proposed on this topic. Major problems or difficulties identified in MSW management in China include MSW land, air, and water pollution, commingled collection, poor administration, shortage of funds, lack of facilities, and problems of training and public awareness. In order to solve these problems and to improve MSW management in China, remedial strategies in three areas are recommended: institutional reform, technology development, and legislation and administrative improvement. The primary principle involved in institutional reform is unifying legislative responsibilities into one body and developing a market mechanism for handling MSW. Composting, landfills, and incineration should be equally developed in accordance with China's needs. The feasibility of developing technology to handle MSW in China is discussed. Also recommended is the establishment of sound regulatory systems, including a service fee system, a source separation system, and a training program. China is presently undergoing economic and institutional reform at the national and local levels. Results of this study will provide useful information on MSW management in China.     

采用正交实验优化湿热法处理厨余垃圾的工艺条件

实验采用3因素3水平的正交实验设计方法,研究了湿热法处理厨余垃圾并使其饲料化的加工工艺中,时间、温度、加水量对厨余垃圾饲用价值的影响,选取粗蛋白、粗脂肪、粗纤维、粗灰分、钙和盐分为评价指标,确定反应的最佳工艺条件.实验结果表明,反应的最佳工艺条件为温度100℃、加水量50%、反应时间30 min.     

运用CFD技术进行二段往复炉排焚烧炉二次风口的辅助设计

二次风口的合理布设是实现炉膛内气体混合均匀、反应完全的有效措施之一，运用CFD技术进行二段往复炉排焚烧炉二次风口的辅助设计，借助PHOENICS软件模拟二次风口对炉内流场的影响。通过模拟发现，二次风口的布设可明显提高烟气的湍流程度．前后墙各设一排直径为0．04m的二次风口可以实现最佳的炉膛流场工况。     

含油污水的综合处理法及其应用

概述了竖向隔板分油法、蜂窝斜管分油法及磁性颗粒吸附过滤法 ,将这 3种方法结合处理某机修厂的含油污水 ,取得了满意效果。     

黑斑蛙Dmrt1基因的克隆及在不同组织中的表达

Dmrt基因家族是新近发现的一个与性别决定相关的基因家族,该家族成员都含有一个新的具有DNA结合能力的保守基序——DM结构域.本文采用简并PCR技术,扩增并克隆了黑斑蛙基因组中的DM结构域,经序列分析,获得了Dmrt家族成员rnDmrt1;进一步根据获得的rnDmrt1序列,设计一对特异引物,采用RT-PCR技术对成蛙不同组织Dmrt1基因的表达进行了研究.结果发现,rnDmrt1只在精巢中特异表达,在卵巢、脑、肝、心、肾及肌肉组织中无表达,显示Dmrt1基因在性别决定和分化中有重要功能. 图4参9     

The effect of ink types and printing processes on flotation deinking efficiency of wastepaper recycling

Wastepaper is the largest fraction of solid waste. Flotation deinking plays an essential role in the product quality and process cost of wastepaper recycling. This paper investigated the effect of ink types and printing processes on flotation deinking. Examination of ink types in this study revealed that newsprint oil-based offset-cold and offset-heat inks contain substantial oil (45 to 60%) and resin (5 to 35%); water-based ink contains water (40%) and resin (polystyrene, 30%); and these inks are liquids with densities around 1 g/cm³ at 25 °C. On the other hand, photocopy and laser-print toners were found to be solid powders with particle diameters of about 20 μm, densities of 1 to 1.5 g/cm³, and a composition that consists primarily of styrene-acrylate copolymers (60 to 90%). Except for water-based ink, which is water soluble, all inks in their initial state are hydrophobic. It was found that for newsprint oil based offset-cold inks there is little change in their surface chemical properties, and their hydrophobic character is retained. These inks in the newsprint wastepaper pulp can be effectively removed by flotation. On the other hand, it was found that during the printing processes, the toner particles undergo polymerization (fusion) and oxidation with the subsequent formation of peroxide bonds due to exposure to heat, light, and oxygen (air). The fusion due to polymerization causes bonding to the paper fibers and the creation of larger toner particle sizes. The oxidation creates a greater polarity at the toner particle surface. These effects account for the poor efficiency in the flotation deinking of office waste. In order to improve office wastepaper recycling, it is evident, based on this study and policy considerations, that there is a need to find ways of improving the efficiency and effectiveness of flotation deinking by modification of the surface properties of printed toner particles, or designing new toner particles.