Field Evaluation of DRAINMOD 5.1 Under a Cold Climate: Simulation of Daily Midspan Water Table Depths and Drain Outflows1

Abstract: The hydrologic performance of DRAINMOD 5.1 was assessed for the southern Quebec region considering freezing/thawing conditions. A tile drained agricultural field in the Pike River watershed was instrumented to measure tile drainage volumes. The model was calibrated using water table depth and subsurface flow data over a two‐year period, while another two‐year dataset served to validate the model. DRAINMOD 5.1 accurately simulated the timing and magnitude of subsurface drainage events. The model also simulated the pattern of water table fluctuations with a good degree of accuracy. The R² between the observed and simulated daily WTD for calibration was >0.78, and that for validation was 0.93. The corresponding coefficients of efficiency (E) were >0.74 and 0.31. The R² and E values for calibration/validation of subsurface flow were 0.73/0.48 and 0.72/0.40, respectively. DRAINMOD simulated monthly subsurface flow quite accurately (E > 0.82 and R² > 0.84). The model precisely simulated daily/monthly drain flow over the entire year, including the winter months. Thus DRAINMOD 5.1 performed well in simulating the hydrology of a cold region.     

Forecasts using Box–Jenkins models for the ambient air quality data of Delhi City

The monthly maximum of the 24-h average time-series data of ambient air quality-sulphur dioxide (SO(2)), nitrogen dioxide (NO(2)) and suspended particulate matter (SPM) concentration monitored at the six National Ambient Air Quality Monitoring (NAAQM) stations in Delhi, was analysed using Box-Jenkins modelling approach (Box et al. 1994). Univariate linear stochastic models were developed to examine the degree of prediction possible for situations where only the past record of pollutant data are available. In all, 18 models were developed, three for each station for each of the respective pollutant. The model evaluation statistics suggest that considerably satisfactory real-time forecasts of pollution concentrations can be generated using the Box-Jenkins approach. The developed models can be used to provide short-term, real-time forecasts of extreme air pollution concentrations for the Air Quality Control Region (AQCR) of Delhi City, India.     

Metallic components of traffic-induced urban aerosol, their spatial variation, and source apportionment

This study proposes a practical method to estimate elemental composition and distribution in order to attribute source and quantify impacts of aerosol particles at an urban region in Kolkata, India. Twelve-hour total particulates were collected in winter (2005–2006) and analyzed by energy-dispersive X-ray fluorescence technique to determine multi-elemental composition, especially trace metals. The aerosols consist of various elements including K, Ca, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, and Pb which exhibit significant concentration at various sites (p?<?0.05). The concentration of different metallic elements were found in the order of Zn ?> ?Pb ?> ?Ni ?> ?Cu ?> ?Cr ?>? Co. Statistical multivariate analysis and correlation matrix analyses were performed for factor identification and consequent source apportionment. Contour profiles demonstrate spatial variation of elemental compositions indicating possible source contribution along with meteorological influences. Spatial differences were clearly most significant for Zn, Ni, Pb, and Cu reflecting the importance of anthropogenic inputs, primarily from automobile sources.     

Alumina-supported oxime for the degradation of sarin and diethylchlorophosphate

1-(4-Chlorophenyl))-N-hydroxymethanimine and cyclohexyl-N-hydroxymethanimine were synthesized and a well-established oxime, i.e., 2-[(hydroxyimino)methyl]-1-methylpyridinium chloride was purchased. Thereafter; all were loaded over Al₂O₃ using incipient wetness technique. The prepared systems were characterized using surface area analyzer, scanning electron microscope, energy dispersive X-ray spectrophotometer, Fourier transform infrared spectrophotometer and thermogravimetric analyzer. Kinetics of the degradation of sarin (GB) and simulant, i.e. diethylchlorophosphate (DEClP) was studied over synthesized oxime impregnated Al₂O₃ and results were compared with well reported oxime impregnated Al₂O₃. Kinetics of reaction was found to be following the pseudo first order reaction kinetics. The order of reactivity of the prepared systems was found to be cyclohexyl-N-hydroxymethanimine/Al₂O₃ > 1-(4-chlorophenyl)-N-hydroxymethanimine/Al₂O₃ > 2-[(hydroxyimino)methyl]-1-methylpyridinium chloride/Al₂O₃ > Al₂O₃. From the reaction kinetics it was observed that the reaction with DEClP was faster than with GB. Cyclohexyl-N-hydroxymethanimine/Al₂O₃ was found to be the most reactive system with half-life of 0.94 and 15 h for DEClP and GB respectively.     

Prevalence and severity of dental fluorosis in relation to fluoride in ground water in the villages of Birbhum district, West Bengal, India

In relation to fluoride in ground water, dental fluorosis is studied in seven villages, viz., Nasipur, Vabanandapur, and Deshnabagram under Nalhati I block and Kamdebpur, Chalk Atla, Nowapara, and Junitpur under Rampurhat II block, of Birbhum district, West Bengal, India. Water samples (N = 70) were collected from the tube wells of the mentioned villages in the months of December 2010 to February 2011 and analyzed for fluoride and other water parameters. The study result revealed that the fluoride levels of almost all the water samples (95.7%) were higher than 1.5 mg/L, with mean values of 3.15 and 3.83 mg/L in Nalhati I block and Rampurhat II block, respectively. Dental fluorosis of 490 respondents was visually determined by a competent dentist using Dean’s index (DI) and the tooth surface index of fluorosis (TSIF). According to the DI, the percentage of severely affected respondents was lowest in Chalk Atla (0%) and highest in Deshnabagram (50%). The percentage of severely affected respondents was lowest in Kamdebpur and Chalk Atla (0%) and highest in Nowapara (20%) according to the TSIF score. The age group 10–20 years showed the highest percentage of severe DI (40.8%) and the age group 21–30 years showed the highest percentage of severe TSIF (22.51%) compared to the other age groups in the study. The positive relationship between the fluoride level in water and the severity of dental fluorosis has been proved statistically. The high mean score of dental fluorosis indicates that dental fluorosis is endemic throughout the study area.     

Use of EST database markers from M. truncatula in the transferability to other forage legumes

In general tropical forage legumes lack microsatellites or simple sequence repeat (SSR) markers. Development of genic SSR markers from expressed sequence tagged (EST) database is an alternate and efficient approach to generate the standard DNA markers for genome analysis of such crop species. In the present paper a total of 816 EST-SSRs containing perfect repeats of mono (33.5%), di (14.7%), tri (39.3%), tetra (2.7%), penta (0.7%) and hexa (0.4%) nucleotides were identified from 1,87,763 ESTs of Medicago truncatula. Along with, 70 (8.5%) SSRs of a compound type were also observed. Seven primer pairs of tri repeats were tested for cross transferability in 19 accessions of forage legumes comprising 11 genera. At two different annealing temperatures (55 and 60 degreesC) all primer pairs except AJ410087 reacted with many accessions of forage legumes. Atotal of 51 alleles were detected with six M. truncatula EST-SSRs primer-pairs against DNAfrom 19 accessions representing 11 genera where number of alleles ranged from 2 to 13. The cross-transferability of these EST-SSRs was 40.6% at 55 degreesC and 32.3% at 60 degreesC annealing temperature. 24 alleles of the total 50 (48%) at 55 degreesC and 27 of 51 (53%) at 60 degreesC were polymorphic among the accessions. These 27 polymorphic amplicons identified could be used as DNA markers. This study demonstrates the developed SSR markers from M. truncatula ESTs as a valuable genetic markers and also proposes the possibility of transferring these markers between species of different genera of the legumes of forage importance. It was evident from the results obtained with a set of Desmanthus virgatus accessions where SequentialAgglomerative Hierarchical and Nested (SAHN) cluster analysis based on Dice similarity and Unweighted Pair Group Method with Arithmetic mean Algorithm (UPGMA) revealed significant variability (24 to 74%) among the accessions. High bootstrap values (>30) supported the nodes generated by dendrogram analysis of accessions.     

Utilisation of steel slags as neutralising agents in biooxidation of a refractory gold concentrate and their influence on the subsequent cyanidation

A study on the possibilities to utilise steel slag as neutralising agent in biooxidation of a refractory gold concentrate has been done with reference to commercial grade slaked lime. The idea has been to reduce the operating costs for neutralisation in the biooxidation plant, which is known to be the second largest operating cost. Other benefits would be savings in cost for landfilling of slag, possibilities to recycle elements present in the slag and savings of virgin limestone deposits. The slags used were an EAF slag and a slag from ladle refining; both originating from Swedish scrap based steel-making. Continuous biooxidation of the refractory gold concentrate was conducted in a single-stage 5 L reactor at a retention time of 56 h. The neutralisation capacity was determined by comparing the amount needed, per ton of feed concentrate added, to maintain the desired pH of 1.5 during steady state operation. Slaked lime had the highest neutralisation capacity with 110 kg/ton feed followed by ladle slag and EAF slag with values of 152 and 267 kg/ton feed, respectively. Sulphide mineral oxidation was similar and high in all cases although the ladle slag results were slightly better. Gold recoveries after cyanide leaching on the residues obtained were also similar and were in the range of 86-89%. However, the cyanide consumption expressed as kilogram cyanide per ton of concentrate fed to biooxidation, was double in the case of ladle slag and three times as much for the EAF slag compared to the slaked lime experiment. The increased cyanide consumption could not be explained only by the increased amount of elemental sulphur obtained in the slag experiments. The elemental sulphur formed had different reactivities as seen from the thiocyanate formation and cyanide losses due to thiocyanate formation were 16%, 32% and 40% for EAF slag, slaked lime and ladle slag, respectively. It is concluded that the ladle slag could be a possible replacement for limestone if they are mixed in proper proportions so that the microbial carbon dioxide demand is met whereas the EAF slag is less suitable due to the very fine reaction products obtained which gave operational problems with filtration and washing. To come further, experiments with the normal multi-stage biooxidation set-up with total retention time of 120 h should be performed which would increase the sulphur oxidation and eventually also reduce the cyanide consumption.