氟磺隆水解动力学研究

采用试验室内模拟试验的方法,研究不同pH的缓冲溶液和不同自然水体对氟磺隆水解的影响。实验结果表明,不同pH缓冲溶液和不同自然水体对氟磺隆水解速率均有不同程度的影响。在碱性条件下氟磺隆的水解速率最快,半衰期为0.2 d,酸性条件下次之,半衰期为6.0 d,在中性条件下水解较慢,半衰期为15.7 d,而在不同自然水体中氟磺隆的降解速率为:伊通河水稻田水青湖水蒸馏水。     

2013-2015年上海市霾污染事件潜在源区贡献分析

统计分析2013-2015年上海市每个月不同空气质量等级天数比重,根据HYSPLIT（Hybrid Single Particle Lagrangian Integrated Trajectory）后向轨迹模型对3年内的12月份影响上海地区的污染气团进行了综合聚类分析和逐年聚类分析.在综合12次严重霾事件的后向轨迹基础上,结合上海实时公布的PM_2.5小时浓度资料,对潜在源贡献因子PSCF（Potential Source Contribution Function）和浓度权重轨迹CWT（Concentration-weighted Trajectory）进行分析与比较,研究重霾期间影响上海PM_2.5质量浓度的潜在源区及不同源区对PM_2.5质量浓度的贡献差异.结果显示,上海市3年期间12月份霾颗粒物外来源主要输送渠道为西北路径和北方路径,源自于西北方向的气团比重占总气团的50.4%,北方向的气团几乎都经过海洋后进入上海地区.影响上海地区PM_2.5质量浓度的潜在源区主要分布在安徽、江苏和山东地区,此外江西北部、浙江北部、河北南部及山西少部分地区也对重霾事件中的污染物颗粒有一定程度的贡献.     

数字城市防震减灾

数字城市减灾战略的提出城市发展战略的各种研讨,总是要讨论安全城市概念中重要的灾害安全的涵义。同样,讨论安全战略的场合中,或者在讨论国家安全战略的著作中,也要讨论自然灾害或地震安全,或防灾减灾战略方面的内容。就是在国家长期科     

含锌废水处理技术的研究进展

综述了传统的物理化学法和生物法处理含锌废水的原理,系统阐述了其研究进展.微生物固定技术是一种新兴而有效的生物处理技术,尤其是硫酸盐还原菌固定化技术,将厌氧活性污泥包埋,构建稳定高效的微生物体系,以加强其抗毒性和处理效率.因此,在含锌废水处理方面具有很大的发展潜力,有望得到广泛应用.     

植物的非传统稳定同位素前处理及测定技术研究进展

一直以来植物都是多领域的研究重点,随着非传统稳定同位素的不断发展,植物非传统稳定同位素研究日益增加。但因植物样品中有机物含量高,同位素分馏复杂,样品前处理及测定中存在诸多难题。本文对植物样品非传统稳定同位素工作中常用的前处理方法和测定技术进行了总结。综述了直接萃取法、湿法消解和高温灰化法的原理、操作和优缺点;以K、Ca、Mg、Fe、B等典型非传统稳定同位素为例介绍了非传统稳定同位素常用测定技术,旨在为植物样品的非传统稳定同位素测定进行梳理,最后对其应用方向和测试方法的发展方向进行了展望。     

AHP与GA-SVM耦合模型在滑坡预警中的应用*

为了减少滑坡造成的损失,提高滑坡预测的准确性,通过搭建灾害模拟平台获得滑坡的实验数据,在获得多组模拟实验数据后,分析各变量的特性。首先,通过层次分析(Analytic Hierarchy Process,AHP)算法,对滑坡进行危险度划分;然后,通过支持向量机(Support Vector Machine,SVM)建立模型,遗传算法(Genetic Algorithm,GA)再优化SVM参数,提出1种层次分析法与GA-SVM相耦合的模型。研究结果表明:AHP方法划分后的数据,通过GA与SVM结合建立的模型精度较好,实验预测结果与实际结果较为吻合,与单一SVM相比,精度更高,结果更好,更加适用于多变量的复杂非线性滑坡预警。     

建筑安全风险因素分级排序的风险矩阵法

为减少风险分级排序时产生的风险结,在引入施工安全事故频率的基础上,采用单元格细化和Borda序值法改进原有的风险矩阵法。改进后的方法使得风险等级数量增加,风险结数量减少。将该方法应用于脚手架工程的风险因素的分级与排序,风险等级分为6级,且实现了12个因素的明确排序。     

Effect of pipes in heat pump system on electric vehicle energy saving

ABSTRACT

Refrigerant pressure drop and temperature change in pipes are normally ignored in the thermodynamic analysis of traditional vehicle air conditioning system, this will result in serious errors. In this Paper, pressure drop and temperature difference are simulated in different pipes of electric vehicle (EV) heat pump system to analysis the effects of pipes in the actual EV heat pump system. The results indicate that the greater the mass flow, the faster pressure drop increases, the temperature difference decreases. Pressure drop of saturated liquid refrigerant is smaller than that of saturated gas refrigerant at the same saturation pressure and mass flow rate. The higher the refrigerant pressure (no phase change), the slower pressure drop decreases, the faster the temperature difference decreases. Pressure drop decreases with the increment of bending angle of the pipe. For EV heat pump system, suitable valves and less branches are helpful for energy saving of the system. Shortening the pipe between compressor and condenser can reduce temperature change obviously. Pressure drop per unit length in the pipe between evaporator and compressor is large especially in heating mode because of lower refrigerant density. It even reaches to over 100 times of that in the pipe between condenser and throttle valve in heating mode and has negative effects on the performance of the system. If the evaporator is closer to the compressor and the number of branches is less, then pressure drop will decrease a lot, which will be advantageous for energy saving of the heat pump system.     

Diffusive gradients in thin films using molecularly imprinted polymer binding gels for in situ measurements of antibiotics in urban wastewaters

• Selective molecularly imprinted polymer (MIP) binding gel was prepared. • MIP-DGT showed excellent uptake performance for antibiotics. • In situ measurement of antibiotics in wastewaters via MIP-DGT was developed. • The MIP-DGT method was robust, reliable, and highly sensitive. Urban wastewater is one of main sources for the introduction of antibiotics into the environment. Monitoring the concentrations of antibiotics in wastewater is necessary for estimating the amount of antibiotics discharged into the environment through urban wastewater treatment systems. In this study, we report a novel diffusive gradient in thin films (DGT) method based on molecularly imprinted polymers (MIPs) for in situ measurement of two typical antibiotics, fluoroquinolones (FQs) and sulfonamides (SAs) in urban wastewater. MIPs show specific adsorption toward their templates and their structural analogs, resulting in the selective uptake of the two target antibiotics during MIP-DGT deployment. The uptake performance of the MIP-DGTs was evaluated in the laboratory and was relatively independent of solution pH (4.0–9.0), ionic strength (1–750 mmol/L), and dissolved organic matter (DOM, 0–20 mg/L). MIP-DGT samplers were tested in the effluent of an urban wastewater treatment plant for field trials, where three SA (sulfamethoxazole, sulfapyridine, and trimethoprim) and one FQ (ofloxacin) antibiotics were detected, with concentrations ranging from 25.50 to 117.58 ng/L, which are consistent with the results measured by grab sampling. The total removal efficiency of the antibiotics was 80.1% by the treatment plant. This study demonstrates that MIP-DGT is an effective tool for in situ monitoring of trace antibiotics in complex urban wastewaters.