白洋淀水生食物链BHC、DDT生物浓缩分析

为了评价ＢＨＣ和ＤＤＴ在水生食物链的生物累积放大效应,对白洋淀地区端村水域生态系统水生生物对六六六、ＤＤＴ的富集沿食物生物营养等级而递增的规律性较强（当年生鲫鱼例外）,水体,底泥水生维管束植物,浮游动物、底栖动物,当年生鲫鱼及２龄乌鳢体内六六六残留量分别为：０．３μｇ／Ｌ,０．７μｇ／ｋｇ,１９．０μｇ／ｋｇ,３０．０μｇ／ｋｇ,６０．９μｇ／ｋｇ,１７．２μｇ／ｋｇ、１１０．７μｇ／ｋｇ,ＤＤＴ     

石棉摩擦材料废弃物制吸附剂对染料的吸附研究

以石棉摩擦材料加工废弃物为材料制得的吸附剂,在色度５０００倍溶液中对阳离子黄Ｘ－５ＧＬ的静态吸附量为１５９．６８ｍｇ／ｇ,在色度５００倍的溶液中对阳离子艳蓝ＲＬ的静态吸附量为７９．６８ｍｇ／ｇ;对毛纺厂腈纶染缸废水的处理量可达２８０ｍｌ／ｇ,对活性染料亦有较好的吸附效果,吸附饱和吸附剂可通过后处理实现资源化。     

G-H模式的缺陷及其改进

指出G-H模型在估算面源自身网格的大气污染物浓度时存在的严重缺陷。理论和实际两方面的分析表明,其根源在于G-H对自身网格的计算采用了不合理的面源均匀假定。采用面源局部均匀的假定,对G-H的自身网格模式作了改进。有效性分析表明,改进后的模式能适用于q（铅直向扩散参数σ_z的指数项,σ_z＝bx^q）的任何取值范围,其估算的浓度随大气稳定度的变化也与实际情况完全相符,值得在我国加以推广     

高温/中温两相厌氧消化反应中有机酸的变化

为了深入考察高温／中温两相厌氧消化的反应器系统用以处理混合基质时有机酸的变化特性,采用蒸馏－滴 测定挥发有机酸总量,并在系统达到相对稳定时用色质联机确定有机酸的组成及各自含量。研究结果表明,混合基质经高温消化后挥发有机酸含量有所增加,平均在３４６－５５２９ｍｌ／Ｌ,进一步经中国消化且系统达到稳定后其含量平均为４３－４３３ｍｇ／Ｌ,乙酸,丙酸,丁酸和戊酸是进料混合基质和高温消化后基质中主要有机酸种类     

氟化铵和氨循环法从脱腊脱油废白土中制取白炭黑

利用NH4F与废白土中SiO₂反应生成的（NH4）SiF6溶液和NH₃,进行闭路循环反应,生成NH4F与水合SiO₂（白炭黑）,通过正交优化,得到最佳工艺为：氟化反应,NH₄F∶废白土＝1.28,NH₄F∶水＝0.9,反应温度60℃,反应时间4h;氨化反应,反应温度60℃,反应时间8h,投料比＝2〔25％氨水mL/（NH₄）SiF₆g〕。循环试验结果表明,NH4F转化率可达82％,白炭黑产率达90％以上,只需补充少量NH₄F和氨水,就能在不产生环境污染的情况下从废白土中制取白炭黑。     

液中放电应用于TNT废水的降解

研究了液中放电处理ＴＮＴ废水的可行性及其能量效率关系。实验结果表明,液中放电法可以快速有效地降解废水中的ＴＮＴ。在单次电储能为２５０Ｊ。电极距离为５ｍｍ,ＴＮＴ初始浓度为３６ｍｇ／Ｌ条件下,降解率达８５％。     

香港城市固体废物系统管理

本文以大量翔实的数据介绍了香港对城市固体废物的系统管理,即分类、收集、监测分析、处理和预测评价。香港环保署自８０ 年代开始对城市固体废物进行监测并系统管理。在全港设置了３ 个大型策略性填埋场、５ 个垃圾转运站、１ 个垃圾焚烧厂（１９９７ 年５ 月关闭） 和１个化学废物处理中心。目前,香港政府正筹建一个新的、技术先进的焚烧厂。从１９８６ ～１９９７年,这些废物处理设施处理全港废物量为８９６０ ～２４３００ｔ／ｄ,其中城市固体废物比例每年不等,最低为３０ ．７ ％ ,最高为６５ ．５ ％ 。１９９７ 年,这些废物中可循环再利用物接近５０ ％ ,出口部分达１２０ 多万吨,回收资金２０ 多亿港元。根据历年来城市固体废物量与本地生产总值（ＧＤＰ）和人口数量的密切相关性,预测出２０１１ 年城市固体废物人均产率为２ ．５６ｋｇ／ 人·ｄ, 城市固体废物量为１２８１０ ｔ／ｄ。城市固体废物系统管理紧迫而重要,香港的经验是值得我们借鉴的。     

低浓度Pb2+、Cd2+对鲫鱼肝脏组织中 HSP70诱导的影响

以鲫鱼(Carassius auratus)作为实验对象,经过40 d Pb2+、Cd2+不同浓度的暴露后,运用SDS-PAGE和Western Blotting方法检测鱼肝脏组织内应激蛋白HSP70的诱导表达情况.结果表明,在实验浓度下,与对照组相比,Pb2+、Cd2+对鱼肝脏内HSP70有显著的诱导(P＜0.05),但在Cd2+浓度为0.2 mg/L有停止表达HSP70的现象,可能是由于浓度过高造成了组织病理损伤而破坏了诱导表达机制.实验还发现,在实验浓度低于国家渔业用水标准时,HSP70仍然表现为明显诱导(P＜0.05),充分说明运用分子生物学指标要比传统的环境检测指标敏感,具有对污染物早期预警的作用.     

Evaluation of activated sludge properties’ changes in industrial-wastewater pre-treatment: role of residual aluminum hydrolyzed species with different polymerization degree

● Medium poly Al salts dominated the PAC residual salts with a rational dosage. ● Settlement flocculation effect under medium poly Al salts showed a better trend. ● Complex of medium poly Al salts and enzymes promoted cell activity. ● Medium poly Al salts were beneficial to the effluent indexes. With the widespread introduction of pre-coagulation prior to the biological unit in various industrial wastewater treatments, it is noteworthy that long-term accumulation of residual coagulants has certains effect on both micro and macro characteristics of activated sludge (AS). In this study, the morphology distributions of residual aluminum salts (RAS) and their effects on the removal efficiency of AS were investigated under different PAC concentrations. The results showed that the dominance of medium polymeric RAS, formed under an appropriate PAC dose of 20 mg/L enhanced the hydrophobicity, flocculation, and sedimentation performances of AS, as well as the enzymatic activity in cells in the sludge system, improving the main pollutants removal efficiency of the treatment system. Comparatively the species composition with monomer and dimer / high polymer RAS as the overwhelming parts under an over-dosed PAC concentration of 55 mg/L resulted in excessive secretion of EPS with loose flocs structure and conspicuous inhibition of cellular activity, leading to the deterioration of physico-chemical and biological properties of AS. Based on these findings, this study can shed light on the role of the RAS hydrolyzed species distributions, closely relevant to Al dosage, in affecting the comprehensive properties of AS and provide a theoretical reference for coagulants dosage precise control in the pretreatment of industrial wastewater.     

Screening of indicator pharmaceuticals and personal care products in landfill leachates: a case study in Shanghai,China

● A systematic framework was developed to identify i-PPCPs for landfill leachate. ● The wide-scope target analysis offered a basis for comprehensive i-PPCP screening. ● Source-specificity and representativeness analysis helped to refine i-PPCPs. ● Erythromycin, gemfibrozil and albendazole were identified as i-PPCPs for leachate. Identifying potential sources of pharmaceuticals and personal care products (PPCPs) in the environment is critical for the effective control of PPCP contamination. Landfill leachate is an important source of PPCPs in water; however, it has barely been involved in source apportionment due to the lack of indicator-PPCPs (i-PPCPs) in landfill leachates. This study provides the first systematic framework for identifying i-PPCPs for landfill leachates based on the wide-scope target monitoring of PPCPs. The number of target PPCPs increased from < 20 in previous studies to 68 in the present study. Fifty-nine PPCPs were detected, with median concentrations in leachate samples ranging from below the method quantification limit (MQL) to 41 μg/L, and 19 of them were rarely reported previously. A total of 29 target compounds were determined to be PPCPs of high concern by principal component analysis according to multiple criteria, including occurrence, exposure potential, and ecological effect. Coupled with source-specificity and representativeness analysis, erythromycin, gemfibrozil, and albendazole showed a significant difference in their occurrence in leachate compared to other potential sources (untreated and treated municipal wastewater and livestock wastewater) and correlated with total PPCP concentrations; these were recommended as i-PPCPs for leachates. Indicator screening procedure can be used to develop a sophisticated source apportionment method to identify sources of PPCPs from adjacent landfills.